Finish implementing GATs #134

tmandry · 2018-05-21T21:42:53Z

Implement and test logic around Generic Associated Types.

This required shuffling around the logic rules we used. This PR implements the set of rules described in #12 (comment).

Closes #116.

Adds reverse rule and WF rules for associated type bounds. The WF rules aren't quite right, but they'll be fixed in a later commit.

tmandry · 2018-05-23T19:32:27Z

Ready for review! Various disclaimers..

This doesn't yet support higher-ranked inline bounds.

The following clause is not tested:

FromEnv(Self: Foo) :- FromEnv((Foo::Item<'a,T>)<Self>).

I'm not sure it's possible to test this in the current grammar.

I just remembered I want to clean up some repetition in lowering.rs later.

scalexm

Left a few nits. Otherwise excellent! Test coverage is good, we'd just need some more tests with FromEnv(<Self as Foo>::Assoc). I agree that quantified inline bounds can be left as a follow-up item.

scalexm · 2018-05-23T20:43:07Z

src/ir.rs

+impl InlineBound {
+    /// Applies the `InlineBound` to `self_ty` and lowers to a [`DomainGoal`].
+    /// 
+    /// Because an `InlineBound` not know anything about what it's binding, you


Nit: "does not know"

scalexm · 2018-05-23T20:49:56Z

src/ir.rs

+    ///
+    /// These must be proven by the implementer, for all possible parameters that
+    /// would result in a well-formed projection.
+    crate bounds: Vec<InlineBound>,

    /// Where clauses that must hold for the projection be well-formed.


Nit (pre-existing): "for the projection to be well-formed"?

scalexm · 2018-05-23T20:51:28Z

src/ir.rs

+    /// ```notrust
+    /// Implemented(<?0 as Foo>::Item<?1>: Sized)
+    /// ```
+    pub fn bounds_on_self(&self) -> Vec<DomainGoal> {


also could be crate fn

scalexm · 2018-05-23T20:51:56Z

src/ir.rs

+    /// 
+    /// Because an `InlineBound` not know anything about what it's binding, you
+    /// must provide that type as `self_ty`.
+    pub fn lower_with_self(&self, self_ty: Ty) -> Vec<DomainGoal> {


could be crate fn, same below

scalexm · 2018-05-23T20:53:26Z

src/ir/lowering/test.rs

@@ -370,3 +378,31 @@ fn duplicate_parameters() {
        }
    }
 }
+
+#[test]
+fn external_items() {


(for @nikomatsakis: this is not part of the PR, we just moved these tests because they were in the wrong place)

scalexm · 2018-05-23T20:57:34Z

src/rules.rs

+        // but it's here for completeness.
+        //
+        //    forall<Self> {
+        //        FromEnv(Self: Foo) :- FromEnv((Foo::Assoc)<Self>).


It seems like we support FromEnv(ty) in the grammar? Would be worth to add some tests of the form:
if (FromEnv(<Self as Foo>::Assoc)) { ... }

scalexm · 2018-05-23T20:58:58Z

src/rules/wf.rs

+                                      .map(|p| p.to_parameter())
+                                      .chain(trait_ref.parameters.iter().cloned())
+                                      .collect();
+


I'd add a comment below, something like:
"these bounds come from the trait, hence trait parameters must be substituted with those of the impl"

scalexm · 2018-05-23T21:00:00Z

src/rules/wf.rs

+                None => return None,
+            };
+
+            let hypotheses =


and saying that we do the same for where clauses here, regarding the comment above

scalexm · 2018-05-23T21:01:33Z

src/rules/wf/test.rs

@@ -217,7 +217,7 @@ fn projection_type_in_header() {

            // Projection types in an impl header are not assumed to be well-formed,
            // an explicit where clause is needed (see below).


The comment is obsolete and can be removed.

I think it's still mostly correct, but I changed the wording some.

scalexm · 2018-05-23T21:04:34Z

src/solve/test.rs

@@ -567,6 +760,46 @@ fn normalize_implied_bound() {
    }
 }

+#[test]
+fn normalize_implied_bound_gat() {


Pre-existing: could this be renamed to just "gat_implied_bounds" or something like this?

nikomatsakis

I skimmed only the tests, but it looks great. Can't wait to dive in with more depth =)

…er-errors Stabilize generic associated types Closes rust-lang#44265 r? `@nikomatsakis` # ⚡ Status of the discussion ⚡ * [x] There have been several serious concerns raised, [summarized here](rust-lang#96709 (comment)). * [x] There has also been a [deep-dive comment](rust-lang#96709 (comment)) explaining some of the "patterns of code" that are enabled by GATs, based on use-cases posted to this thread or on the tracking issue. * [x] We have modeled some aspects of GATs in [a-mir-formality](https://github.com/nikomatsakis/a-mir-formality) to give better confidence in how they will be resolved in the future. [You can read a write-up here](https://github.com/rust-lang/types-team/blob/master/minutes/2022-07-08-implied-bounds-and-wf-checking.md). * [x] The major points of the discussion have been [summarized on the GAT initiative repository](https://rust-lang.github.io/generic-associated-types-initiative/mvp.html). * [x] [FCP has been proposed](rust-lang#96709 (comment)) and we are awaiting final decisions and discussion amidst the relevant team members. # Stabilization proposal This PR proposes the stabilization of `#![feature(generic_associated_types)]`. While there a number of future additions to be made and bugs to be fixed (both discussed below), properly doing these will require significant language design and will ultimately likely be backwards-compatible. Given the overwhelming desire to have some form of generic associated types (GATs) available on stable and the stability of the "simple" uses, stabilizing the current subset of GAT features is almost certainly the correct next step. Tracking issue: rust-lang#44265 Initiative: https://rust-lang.github.io/generic-associated-types-initiative/ RFC: https://github.com/rust-lang/rfcs/blob/master/text/1598-generic_associated_types.md Version: 1.65 (2022-08-22 => beta, 2022-11-03 => stable). ## Motivation There are a myriad of potential use cases for GATs. Stabilization unblocks probable future language features (e.g. async functions in traits), potential future standard library features (e.g. a `LendingIterator` or some form of `Iterator` with a lifetime generic), and a plethora of user use cases (some of which can be seen just by scrolling through the tracking issue and looking at all the issues linking to it). There are a myriad of potential use cases for GATs. First, there are many users that have chosen to not use GATs primarily because they are not stable (some of which can be seen just by scrolling through the tracking issue and looking at all the issues linking to it). Second, while language feature desugaring isn't *blocked* on stabilization, it gives more confidence on using the feature. Likewise, library features like `LendingIterator` are not necessarily blocked on stabilization to be implemented unstably; however few, if any, public-facing APIs actually use unstable features. This feature has a long history of design, discussion, and developement - the RFC was first introduced roughly 6 years ago. While there are still a number of features left to implement and bugs left to fix, it's clear that it's unlikely those will have backwards-incompatibility concerns. Additionally, the bugs that do exist do not strongly impede the most-common use cases. ## What is stabilized The primary language feature stabilized here is the ability to have generics on associated types, as so. Additionally, where clauses on associated types will now be accepted, regardless if the associated type is generic or not. ```rust trait ATraitWithGATs { type Assoc<'a, T> where T: 'a; } trait ATraitWithoutGATs<'a, T> { type Assoc where T: 'a; } ``` When adding an impl for a trait with generic associated types, the generics for the associated type are copied as well. Note that where clauses are allowed both after the specified type and before the equals sign; however, the latter is a warn-by-default deprecation. ```rust struct X; struct Y; impl ATraitWithGATs for X { type Assoc<'a, T> = &'a T where T: 'a; } impl ATraitWithGATs for Y { type Assoc<'a, T> where T: 'a = &'a T; } ``` To use a GAT in a function, generics are specified on the associated type, as if it was a struct or enum. GATs can also be specified in trait bounds: ```rust fn accepts_gat<'a, T>(t: &'a T) -> T::Assoc<'a, T> where for<'x> T: ATraitWithGATs<Assoc<'a, T> = &'a T> { ... } ``` GATs can also appear in trait methods. However, depending on how they are used, they may confer where clauses on the associated type definition. More information can be found [here](rust-lang#87479). Briefly, where clauses are required when those bounds can be proven in the methods that *construct* the GAT or other associated types that use the GAT in the trait. This allows impls to have maximum flexibility in the types defined for the associated type. To take a relatively simple example: ```rust trait Iterable { type Item<'a>; type Iterator<'a>: Iterator<Item = Self::Item<'a>>; fn iter<'x>(&'x self) -> Self::Iterator<'x>; //^ We know that `Self: 'a` for `Iterator<'a>`, so we require that bound on `Iterator` // `Iterator` uses `Self::Item`, so we also require a `Self: 'a` on `Item` too } ``` A couple well-explained examples are available in a previous [blog post](https://blog.rust-lang.org/2021/08/03/GATs-stabilization-push.html). ## What isn't stabilized/implemented ### Universal type/const quantification Currently, you can write a bound like `X: for<'a> Trait<Assoc<'a> = &'a ()>`. However, you cannot currently write `for<T> X: Trait<Assoc<T> = T>` or `for<const N> X: Trait<Assoc<N> = [usize; N]>`. Here is an example where this is needed: ```rust trait Foo {} trait Trait { type Assoc<F: Foo>; } trait Trait2: Sized { fn foo<F: Foo, T: Trait<Assoc<F> = F>>(_t: T); } ``` In the above example, the *caller* must specify `F`, which is likely not what is desired. ### Object-safe GATs Unlike non-generic associated types, traits with GATs are not currently object-safe. In other words the following are not allowed: ```rust trait Trait { type Assoc<'a>; } fn foo(t: &dyn for<'a> Trait<Assoc<'a> = &'a ()>) {} //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not allowed let ty: Box<dyn for<'a> Trait<Assoc<'a> = &'a ()>>; //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not allowed ``` ### Higher-kinded types You cannot write currently (and there are no current plans to implement this): ```rust struct Struct<'a> {} fn foo(s: for<'a> Struct<'a>) {} ``` ## Tests There are many tests covering GATs that can be found in `src/test/ui/generic-associated-types`. Here, I'll list (in alphanumeric order) tests highlight some important behavior or contain important patterns. - `./parse/*`: Parsing of GATs in traits and impls, and the trait path with GATs - `./collections-project-default.rs`: Interaction with associated type defaults - `./collections.rs`: The `Collection` pattern - `./const-generics-gat-in-trait-return-type-*.rs`: Const parameters - `./constraint-assoc-type-suggestion.rs`: Emit correct syntax in suggestion - `./cross-crate-bounds.rs`: Ensure we handles bounds across crates the same - `./elided-in-expr-position.rs`: Disallow lifetime elision in return position - `./gat-in-trait-path-undeclared-lifetime.rs`: Ensure we error on undeclared lifetime in trait path - `./gat-in-trait-path.rs`: Base trait path case - `./gat-trait-path-generic-type-arg.rs`: Don't allow shadowing of parameters - `./gat-trait-path-parenthesised-args.rs`: Don't allow paranthesized args in trait path - `./generic-associated-types-where.rs`: Ensure that we require where clauses from trait to be met on impl - `./impl_bounds.rs`: Check that the bounds on GATs in an impl are checked - `./issue-76826.rs`: `Windows` pattern - `./issue-78113-lifetime-mismatch-dyn-trait-box.rs`: Implicit 'static diagnostics - `./issue-84931.rs`: Ensure that we have a where clause on GAT to ensure trait parameter lives long enough - `./issue-87258_a.rs`: Unconstrained opaque type with TAITs - `./issue-87429-2.rs`: Ensure we can use bound vars in the bounds - `./issue-87429-associated-type-default.rs`: Ensure bounds hold with associated type defaults, for both trait and impl - `./issue-87429-specialization.rs`: Check that bounds hold under specialization - `./issue-88595.rs`: Under the outlives lint, we require a bound for both trait and GAT lifetime when trait lifetime is used in function - `./issue-90014.rs`: Lifetime bounds are checked with TAITs - `./issue-91139.rs`: Under migrate mode, but not NLL, we don't capture implied bounds from HRTB lifetimes used in a function and GATs - `./issue-91762.rs`: We used to too eagerly pick param env candidates when normalizing with GATs. We now require explicit parameters specified. - `./issue-95305.rs`: Disallow lifetime elision in trait paths - `./iterable.rs`: `Iterable` pattern - `./method-unsatified-assoc-type-predicate.rs`: Print predicates with GATs correctly in method resolve error - `./missing_lifetime_const.rs`: Ensure we must specify lifetime args (not elidable) - `./missing-where-clause-on-trait.rs`: Ensure we don't allow stricter bounds on impl than trait - `./parameter_number_and_kind_impl.rs`: Ensure paramters on GAT in impl match GAT in trait - `./pointer_family.rs`: `PointerFamily` pattern - `./projection-bound-cycle.rs`: Don't allow invalid cycles to prove bounds - `./self-outlives-lint.rs`: Ensures that an e.g. `Self: 'a` is written on the traits GAT if that bound can be implied from the GAT usage in the trait - `./shadowing.rs`: Don't allow lifetime shadowing in params - `./streaming_iterator.rs`: `StreamingIterator`(`LendingIterator`) pattern - `./trait-objects.rs`: Disallow trait objects for traits with GATs - `./variance_constraints.rs`: Require that GAT substs be invariant ## Remaining bugs and open issues A full list of remaining open issues can be found at: https://github.com/rust-lang/rust/labels/F-generic_associated_types There are some `known-bug` tests in-tree at `src/test/ui/generic-associated-types/bugs`. Here I'll categorize most of those that GAT bugs (or involve a pattern found more with GATs), but not those that include GATs but not a GAT issue in and of itself. (I also won't include issues directly for things listed elsewhere here.) Using the concrete type of a GAT instead of the projection type can give errors, since lifetimes are chosen to be early-bound vs late-bound. - rust-lang#85533 - rust-lang#87803 In certain cases, we can run into cycle or overflow errors. This is more generally a problem with associated types. - rust-lang#87755 - rust-lang#87758 Bounds on an associatd type need to be proven by an impl, but where clauses need to be proven by the usage. This can lead to confusion when users write one when they mean the other. - rust-lang#87831 - rust-lang#90573 We sometimes can't normalize closure signatures fully. Really an asociated types issue, but might happen a bit more frequently with GATs, since more obvious place for HRTB lifetimes. - rust-lang#88382 When calling a function, we assign types to parameters "too late", after we already try (and fail) to normalize projections. Another associated types issue that might pop up more with GATs. - rust-lang#88460 - rust-lang#96230 We don't fully have implied bounds for lifetimes appearing in GAT trait paths, which can lead to unconstrained type errors. - rust-lang#88526 Suggestion for adding lifetime bounds can suggest unhelpful fixes (`T: 'a` instead of `Self: 'a`), but the next compiler error after making the suggested change is helpful. - rust-lang#90816 - rust-lang#92096 - rust-lang#95268 We can end up requiring that `for<'a> I: 'a` when we really want `for<'a where I: 'a> I: 'a`. This can leave unhelpful errors than effectively can't be satisfied unless `I: 'static`. Requires bigger changes and not only GATs. - rust-lang#91693 Unlike with non-generic associated types, we don't eagerly normalize with param env candidates. This is intended behavior (for now), to avoid accidentaly stabilizing picking arbitrary impls. - rust-lang#91762 Some Iterator adapter patterns (namely `filter`) require Polonius or unsafe to work. - rust-lang#92985 ## Potential Future work ### Universal type/const quantification No work has been done to implement this. There are also some questions around implied bounds. ### Object-safe GATs The intention is to make traits with GATs object-safe. There are some design work to be done around well-formedness rules and general implementation. ### GATified std lib types It would be helpful to either introduce new std lib traits (like `LendingIterator`) or to modify existing ones (adding a `'a` generic to `Iterator::Item`). There also a number of other candidates, like `Index`/`IndexMut` and `Fn`/`FnMut`/`FnOnce`. ### Reduce the need for `for<'a>` Seen [here](rust-lang/rfcs#1598 (comment)). One possible syntax: ```rust trait Iterable { type Iter<'a>: Iterator<Item = Self::Item<'a>>; } fn foo<T>() where T: Iterable, T::Item<let 'a>: Display { } //note the `let`! ``` ### Better implied bounds on higher-ranked things Currently if we have a `type Item<'a> where self: 'a`, and a `for<'a> T: Iterator<Item<'a> = &'a ()`, this requires `for<'a> Self: 'a`. Really, we want `for<'a where T: 'a> ...` There was some mentions of this all the back in the RFC thread [here](rust-lang/rfcs#1598 (comment)). ## Alternatives ### Make generics on associated type in bounds a binder Imagine the bound `for<'a> T: Trait<Item<'a>= &'a ()>`. It might be that `for<'a>` is "too large" and it should instead be `T: Trait<for<'a> Item<'a>= &'a ()>`. Brought up in RFC thread [here](rust-lang/rfcs#1598 (comment)) and in a few places since. Another related question: Is `for<'a>` the right syntax? Maybe `where<'a>`? Also originally found in RFC thread [here](rust-lang/rfcs#1598 (comment)). ### Stabilize lifetime GATs first This has been brought up a few times. The idea is to only allow GATs with lifetime parameters to in initial stabilization. This was probably most useful prior to actual implementation. At this point, lifetimes, types, and consts are all implemented and work. It feels like an arbitrary split without strong reason. ## History * On 2016-04-30, [RFC opened](rust-lang/rfcs#1598) * On 2017-09-02, RFC merged and [tracking issue opened](rust-lang#44265) * On 2017-10-23, [Move Generics from MethodSig to TraitItem and ImplItem](rust-lang#44766) * On 2017-12-01, [Generic Associated Types Parsing & Name Resolution](rust-lang#45904) * On 2017-12-15, [https://github.com/rust-lang/rust/pull/46706](https://github.com/rust-lang/rust/pull/46706) * On 2018-04-23, [Feature gate where clauses on associated types](rust-lang#49368) * On 2018-05-10, [Extend tests for RFC1598 (GAT)](rust-lang#49423) * On 2018-05-24, [Finish implementing GATs (Chalk)](rust-lang/chalk#134) * On 2019-12-21, [Make GATs less ICE-prone](rust-lang#67160) * On 2020-02-13, [fix lifetime shadowing check in GATs](rust-lang#68938) * On 2020-06-20, [Projection bound validation](rust-lang#72788) * On 2020-10-06, [Separate projection bounds and predicates](rust-lang#73905) * On 2021-02-05, [Generic associated types in trait paths](rust-lang#79554) * On 2021-02-06, [Trait objects do not work with generic associated types](rust-lang#81823) * On 2021-04-28, [Make traits with GATs not object safe](rust-lang#84622) * On 2021-05-11, [Improve diagnostics for GATs](rust-lang#82272) * On 2021-07-16, [Make GATs no longer an incomplete feature](rust-lang#84623) * On 2021-07-16, [Replace associated item bound vars with placeholders when projecting](rust-lang#86993) * On 2021-07-26, [GATs: Decide whether to have defaults for `where Self: 'a`](rust-lang#87479) * On 2021-08-25, [Normalize projections under binders](rust-lang#85499) * On 2021-08-03, [The push for GATs stabilization](https://blog.rust-lang.org/2021/08/03/GATs-stabilization-push.html) * On 2021-08-12, [Detect stricter constraints on gats where clauses in impls vs trait](rust-lang#88336) * On 2021-09-20, [Proposal: Change syntax of where clauses on type aliases](rust-lang#89122) * On 2021-11-06, [Implementation of GATs outlives lint](rust-lang#89970) * On 2021-12-29. [Parse and suggest moving where clauses after equals for type aliases](rust-lang#92118) * On 2022-01-15, [Ignore static lifetimes for GATs outlives lint](rust-lang#92865) * On 2022-02-08, [Don't constrain projection predicates with inference vars in GAT substs](rust-lang#92917) * On 2022-02-15, [Rework GAT where clause check](rust-lang#93820) * On 2022-02-19, [Only mark projection as ambiguous if GAT substs are constrained](rust-lang#93892) * On 2022-03-03, [Support GATs in Rustdoc](rust-lang#94009) * On 2022-03-06, [Change location of where clause on GATs](rust-lang#90076) * On 2022-05-04, [A shiny future with GATs blog post](https://jackh726.github.io/rust/2022/05/04/a-shiny-future-with-gats.html) * On 2022-05-04, [Stabilization PR](rust-lang#96709)

Stabilize generic associated types Closes #44265 r? `@nikomatsakis` # ⚡ Status of the discussion ⚡ * [x] There have been several serious concerns raised, [summarized here](rust-lang/rust#96709 (comment)). * [x] There has also been a [deep-dive comment](rust-lang/rust#96709 (comment)) explaining some of the "patterns of code" that are enabled by GATs, based on use-cases posted to this thread or on the tracking issue. * [x] We have modeled some aspects of GATs in [a-mir-formality](https://github.com/nikomatsakis/a-mir-formality) to give better confidence in how they will be resolved in the future. [You can read a write-up here](https://github.com/rust-lang/types-team/blob/master/minutes/2022-07-08-implied-bounds-and-wf-checking.md). * [x] The major points of the discussion have been [summarized on the GAT initiative repository](https://rust-lang.github.io/generic-associated-types-initiative/mvp.html). * [x] [FCP has been proposed](rust-lang/rust#96709 (comment)) and we are awaiting final decisions and discussion amidst the relevant team members. # Stabilization proposal This PR proposes the stabilization of `#![feature(generic_associated_types)]`. While there a number of future additions to be made and bugs to be fixed (both discussed below), properly doing these will require significant language design and will ultimately likely be backwards-compatible. Given the overwhelming desire to have some form of generic associated types (GATs) available on stable and the stability of the "simple" uses, stabilizing the current subset of GAT features is almost certainly the correct next step. Tracking issue: #44265 Initiative: https://rust-lang.github.io/generic-associated-types-initiative/ RFC: https://github.com/rust-lang/rfcs/blob/master/text/1598-generic_associated_types.md Version: 1.65 (2022-08-22 => beta, 2022-11-03 => stable). ## Motivation There are a myriad of potential use cases for GATs. Stabilization unblocks probable future language features (e.g. async functions in traits), potential future standard library features (e.g. a `LendingIterator` or some form of `Iterator` with a lifetime generic), and a plethora of user use cases (some of which can be seen just by scrolling through the tracking issue and looking at all the issues linking to it). There are a myriad of potential use cases for GATs. First, there are many users that have chosen to not use GATs primarily because they are not stable (some of which can be seen just by scrolling through the tracking issue and looking at all the issues linking to it). Second, while language feature desugaring isn't *blocked* on stabilization, it gives more confidence on using the feature. Likewise, library features like `LendingIterator` are not necessarily blocked on stabilization to be implemented unstably; however few, if any, public-facing APIs actually use unstable features. This feature has a long history of design, discussion, and developement - the RFC was first introduced roughly 6 years ago. While there are still a number of features left to implement and bugs left to fix, it's clear that it's unlikely those will have backwards-incompatibility concerns. Additionally, the bugs that do exist do not strongly impede the most-common use cases. ## What is stabilized The primary language feature stabilized here is the ability to have generics on associated types, as so. Additionally, where clauses on associated types will now be accepted, regardless if the associated type is generic or not. ```rust trait ATraitWithGATs { type Assoc<'a, T> where T: 'a; } trait ATraitWithoutGATs<'a, T> { type Assoc where T: 'a; } ``` When adding an impl for a trait with generic associated types, the generics for the associated type are copied as well. Note that where clauses are allowed both after the specified type and before the equals sign; however, the latter is a warn-by-default deprecation. ```rust struct X; struct Y; impl ATraitWithGATs for X { type Assoc<'a, T> = &'a T where T: 'a; } impl ATraitWithGATs for Y { type Assoc<'a, T> where T: 'a = &'a T; } ``` To use a GAT in a function, generics are specified on the associated type, as if it was a struct or enum. GATs can also be specified in trait bounds: ```rust fn accepts_gat<'a, T>(t: &'a T) -> T::Assoc<'a, T> where for<'x> T: ATraitWithGATs<Assoc<'a, T> = &'a T> { ... } ``` GATs can also appear in trait methods. However, depending on how they are used, they may confer where clauses on the associated type definition. More information can be found [here](rust-lang/rust#87479). Briefly, where clauses are required when those bounds can be proven in the methods that *construct* the GAT or other associated types that use the GAT in the trait. This allows impls to have maximum flexibility in the types defined for the associated type. To take a relatively simple example: ```rust trait Iterable { type Item<'a>; type Iterator<'a>: Iterator<Item = Self::Item<'a>>; fn iter<'x>(&'x self) -> Self::Iterator<'x>; //^ We know that `Self: 'a` for `Iterator<'a>`, so we require that bound on `Iterator` // `Iterator` uses `Self::Item`, so we also require a `Self: 'a` on `Item` too } ``` A couple well-explained examples are available in a previous [blog post](https://blog.rust-lang.org/2021/08/03/GATs-stabilization-push.html). ## What isn't stabilized/implemented ### Universal type/const quantification Currently, you can write a bound like `X: for<'a> Trait<Assoc<'a> = &'a ()>`. However, you cannot currently write `for<T> X: Trait<Assoc<T> = T>` or `for<const N> X: Trait<Assoc<N> = [usize; N]>`. Here is an example where this is needed: ```rust trait Foo {} trait Trait { type Assoc<F: Foo>; } trait Trait2: Sized { fn foo<F: Foo, T: Trait<Assoc<F> = F>>(_t: T); } ``` In the above example, the *caller* must specify `F`, which is likely not what is desired. ### Object-safe GATs Unlike non-generic associated types, traits with GATs are not currently object-safe. In other words the following are not allowed: ```rust trait Trait { type Assoc<'a>; } fn foo(t: &dyn for<'a> Trait<Assoc<'a> = &'a ()>) {} //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not allowed let ty: Box<dyn for<'a> Trait<Assoc<'a> = &'a ()>>; //^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ not allowed ``` ### Higher-kinded types You cannot write currently (and there are no current plans to implement this): ```rust struct Struct<'a> {} fn foo(s: for<'a> Struct<'a>) {} ``` ## Tests There are many tests covering GATs that can be found in `src/test/ui/generic-associated-types`. Here, I'll list (in alphanumeric order) tests highlight some important behavior or contain important patterns. - `./parse/*`: Parsing of GATs in traits and impls, and the trait path with GATs - `./collections-project-default.rs`: Interaction with associated type defaults - `./collections.rs`: The `Collection` pattern - `./const-generics-gat-in-trait-return-type-*.rs`: Const parameters - `./constraint-assoc-type-suggestion.rs`: Emit correct syntax in suggestion - `./cross-crate-bounds.rs`: Ensure we handles bounds across crates the same - `./elided-in-expr-position.rs`: Disallow lifetime elision in return position - `./gat-in-trait-path-undeclared-lifetime.rs`: Ensure we error on undeclared lifetime in trait path - `./gat-in-trait-path.rs`: Base trait path case - `./gat-trait-path-generic-type-arg.rs`: Don't allow shadowing of parameters - `./gat-trait-path-parenthesised-args.rs`: Don't allow paranthesized args in trait path - `./generic-associated-types-where.rs`: Ensure that we require where clauses from trait to be met on impl - `./impl_bounds.rs`: Check that the bounds on GATs in an impl are checked - `./issue-76826.rs`: `Windows` pattern - `./issue-78113-lifetime-mismatch-dyn-trait-box.rs`: Implicit 'static diagnostics - `./issue-84931.rs`: Ensure that we have a where clause on GAT to ensure trait parameter lives long enough - `./issue-87258_a.rs`: Unconstrained opaque type with TAITs - `./issue-87429-2.rs`: Ensure we can use bound vars in the bounds - `./issue-87429-associated-type-default.rs`: Ensure bounds hold with associated type defaults, for both trait and impl - `./issue-87429-specialization.rs`: Check that bounds hold under specialization - `./issue-88595.rs`: Under the outlives lint, we require a bound for both trait and GAT lifetime when trait lifetime is used in function - `./issue-90014.rs`: Lifetime bounds are checked with TAITs - `./issue-91139.rs`: Under migrate mode, but not NLL, we don't capture implied bounds from HRTB lifetimes used in a function and GATs - `./issue-91762.rs`: We used to too eagerly pick param env candidates when normalizing with GATs. We now require explicit parameters specified. - `./issue-95305.rs`: Disallow lifetime elision in trait paths - `./iterable.rs`: `Iterable` pattern - `./method-unsatified-assoc-type-predicate.rs`: Print predicates with GATs correctly in method resolve error - `./missing_lifetime_const.rs`: Ensure we must specify lifetime args (not elidable) - `./missing-where-clause-on-trait.rs`: Ensure we don't allow stricter bounds on impl than trait - `./parameter_number_and_kind_impl.rs`: Ensure paramters on GAT in impl match GAT in trait - `./pointer_family.rs`: `PointerFamily` pattern - `./projection-bound-cycle.rs`: Don't allow invalid cycles to prove bounds - `./self-outlives-lint.rs`: Ensures that an e.g. `Self: 'a` is written on the traits GAT if that bound can be implied from the GAT usage in the trait - `./shadowing.rs`: Don't allow lifetime shadowing in params - `./streaming_iterator.rs`: `StreamingIterator`(`LendingIterator`) pattern - `./trait-objects.rs`: Disallow trait objects for traits with GATs - `./variance_constraints.rs`: Require that GAT substs be invariant ## Remaining bugs and open issues A full list of remaining open issues can be found at: https://github.com/rust-lang/rust/labels/F-generic_associated_types There are some `known-bug` tests in-tree at `src/test/ui/generic-associated-types/bugs`. Here I'll categorize most of those that GAT bugs (or involve a pattern found more with GATs), but not those that include GATs but not a GAT issue in and of itself. (I also won't include issues directly for things listed elsewhere here.) Using the concrete type of a GAT instead of the projection type can give errors, since lifetimes are chosen to be early-bound vs late-bound. - #85533 - #87803 In certain cases, we can run into cycle or overflow errors. This is more generally a problem with associated types. - #87755 - #87758 Bounds on an associatd type need to be proven by an impl, but where clauses need to be proven by the usage. This can lead to confusion when users write one when they mean the other. - #87831 - #90573 We sometimes can't normalize closure signatures fully. Really an asociated types issue, but might happen a bit more frequently with GATs, since more obvious place for HRTB lifetimes. - #88382 When calling a function, we assign types to parameters "too late", after we already try (and fail) to normalize projections. Another associated types issue that might pop up more with GATs. - #88460 - #96230 We don't fully have implied bounds for lifetimes appearing in GAT trait paths, which can lead to unconstrained type errors. - #88526 Suggestion for adding lifetime bounds can suggest unhelpful fixes (`T: 'a` instead of `Self: 'a`), but the next compiler error after making the suggested change is helpful. - #90816 - #92096 - #95268 We can end up requiring that `for<'a> I: 'a` when we really want `for<'a where I: 'a> I: 'a`. This can leave unhelpful errors than effectively can't be satisfied unless `I: 'static`. Requires bigger changes and not only GATs. - #91693 Unlike with non-generic associated types, we don't eagerly normalize with param env candidates. This is intended behavior (for now), to avoid accidentaly stabilizing picking arbitrary impls. - #91762 Some Iterator adapter patterns (namely `filter`) require Polonius or unsafe to work. - #92985 ## Potential Future work ### Universal type/const quantification No work has been done to implement this. There are also some questions around implied bounds. ### Object-safe GATs The intention is to make traits with GATs object-safe. There are some design work to be done around well-formedness rules and general implementation. ### GATified std lib types It would be helpful to either introduce new std lib traits (like `LendingIterator`) or to modify existing ones (adding a `'a` generic to `Iterator::Item`). There also a number of other candidates, like `Index`/`IndexMut` and `Fn`/`FnMut`/`FnOnce`. ### Reduce the need for `for<'a>` Seen [here](rust-lang/rfcs#1598 (comment)). One possible syntax: ```rust trait Iterable { type Iter<'a>: Iterator<Item = Self::Item<'a>>; } fn foo<T>() where T: Iterable, T::Item<let 'a>: Display { } //note the `let`! ``` ### Better implied bounds on higher-ranked things Currently if we have a `type Item<'a> where self: 'a`, and a `for<'a> T: Iterator<Item<'a> = &'a ()`, this requires `for<'a> Self: 'a`. Really, we want `for<'a where T: 'a> ...` There was some mentions of this all the back in the RFC thread [here](rust-lang/rfcs#1598 (comment)). ## Alternatives ### Make generics on associated type in bounds a binder Imagine the bound `for<'a> T: Trait<Item<'a>= &'a ()>`. It might be that `for<'a>` is "too large" and it should instead be `T: Trait<for<'a> Item<'a>= &'a ()>`. Brought up in RFC thread [here](rust-lang/rfcs#1598 (comment)) and in a few places since. Another related question: Is `for<'a>` the right syntax? Maybe `where<'a>`? Also originally found in RFC thread [here](rust-lang/rfcs#1598 (comment)). ### Stabilize lifetime GATs first This has been brought up a few times. The idea is to only allow GATs with lifetime parameters to in initial stabilization. This was probably most useful prior to actual implementation. At this point, lifetimes, types, and consts are all implemented and work. It feels like an arbitrary split without strong reason. ## History * On 2016-04-30, [RFC opened](rust-lang/rfcs#1598) * On 2017-09-02, RFC merged and [tracking issue opened](rust-lang/rust#44265) * On 2017-10-23, [Move Generics from MethodSig to TraitItem and ImplItem](rust-lang/rust#44766) * On 2017-12-01, [Generic Associated Types Parsing & Name Resolution](rust-lang/rust#45904) * On 2017-12-15, [https://github.com/rust-lang/rust/pull/46706](https://github.com/rust-lang/rust/pull/46706) * On 2018-04-23, [Feature gate where clauses on associated types](rust-lang/rust#49368) * On 2018-05-10, [Extend tests for RFC1598 (GAT)](rust-lang/rust#49423) * On 2018-05-24, [Finish implementing GATs (Chalk)](rust-lang/chalk#134) * On 2019-12-21, [Make GATs less ICE-prone](rust-lang/rust#67160) * On 2020-02-13, [fix lifetime shadowing check in GATs](rust-lang/rust#68938) * On 2020-06-20, [Projection bound validation](rust-lang/rust#72788) * On 2020-10-06, [Separate projection bounds and predicates](rust-lang/rust#73905) * On 2021-02-05, [Generic associated types in trait paths](rust-lang/rust#79554) * On 2021-02-06, [Trait objects do not work with generic associated types](rust-lang/rust#81823) * On 2021-04-28, [Make traits with GATs not object safe](rust-lang/rust#84622) * On 2021-05-11, [Improve diagnostics for GATs](rust-lang/rust#82272) * On 2021-07-16, [Make GATs no longer an incomplete feature](rust-lang/rust#84623) * On 2021-07-16, [Replace associated item bound vars with placeholders when projecting](rust-lang/rust#86993) * On 2021-07-26, [GATs: Decide whether to have defaults for `where Self: 'a`](rust-lang/rust#87479) * On 2021-08-25, [Normalize projections under binders](rust-lang/rust#85499) * On 2021-08-03, [The push for GATs stabilization](https://blog.rust-lang.org/2021/08/03/GATs-stabilization-push.html) * On 2021-08-12, [Detect stricter constraints on gats where clauses in impls vs trait](rust-lang/rust#88336) * On 2021-09-20, [Proposal: Change syntax of where clauses on type aliases](rust-lang/rust#89122) * On 2021-11-06, [Implementation of GATs outlives lint](rust-lang/rust#89970) * On 2021-12-29. [Parse and suggest moving where clauses after equals for type aliases](rust-lang/rust#92118) * On 2022-01-15, [Ignore static lifetimes for GATs outlives lint](rust-lang/rust#92865) * On 2022-02-08, [Don't constrain projection predicates with inference vars in GAT substs](rust-lang/rust#92917) * On 2022-02-15, [Rework GAT where clause check](rust-lang/rust#93820) * On 2022-02-19, [Only mark projection as ambiguous if GAT substs are constrained](rust-lang/rust#93892) * On 2022-03-03, [Support GATs in Rustdoc](rust-lang/rust#94009) * On 2022-03-06, [Change location of where clause on GATs](rust-lang/rust#90076) * On 2022-05-04, [A shiny future with GATs blog post](https://jackh726.github.io/rust/2022/05/04/a-shiny-future-with-gats.html) * On 2022-05-04, [Stabilization PR](rust-lang/rust#96709)

tmandry force-pushed the GAT-step3 branch 5 times, most recently from 8bd16f5 to 6c2d0f4 Compare May 23, 2018 04:42

tmandry and others added 7 commits May 22, 2018 23:52

Add Self: Foo to lowered ProjectionEq where clauses

520c416

Write tests for GATs

3408f36

Add GAT rules that don't involve bounds

c29c033

Add and lower to ir::InlineBounds

d109ff0

Lower bounds on associated types

446df30

Adds reverse rule and WF rules for associated type bounds. The WF rules aren't quite right, but they'll be fixed in a later commit.

Add test mixed_indices_check_projection_bounds

9e52a13

Correctly instantiate where clauses / bounds on GATs in wf.rs

b5d9422

tmandry force-pushed the GAT-step3 branch from 10de9a9 to f3302f5 Compare May 23, 2018 04:55

tmandry added 2 commits May 23, 2018 14:14

Add failing tests for where clauses

fcd7fe2

Correctly instantiate where clauses on GAT impl values

dc524eb

tmandry force-pushed the GAT-step3 branch from f3302f5 to dc524eb Compare May 23, 2018 19:14

tmandry changed the title ~~[WIP] Implement GATs, step 3~~ Finish implementing GATs May 23, 2018

tmandry requested review from scalexm and nikomatsakis May 23, 2018 19:16

scalexm approved these changes May 23, 2018

View reviewed changes

tmandry added 2 commits May 24, 2018 14:55

Add test implied_from_env and clean up

a9ebee0

Merge branch 'master' into GAT-step3

4061896

nikomatsakis approved these changes May 24, 2018

View reviewed changes

nikomatsakis merged commit 38856d0 into rust-lang:master May 24, 2018

tmandry deleted the GAT-step3 branch May 26, 2018 02:18

tmandry mentioned this pull request May 31, 2018

Add lowering rules for GATs rust-lang/rustc-dev-guide#147

Merged

scalexm mentioned this pull request Jun 12, 2018

🔬 Tracking issue for RFC 2089: Extended Implied bounds rust-lang/rust#44491

Open

3 tasks

LukasKalbertodt mentioned this pull request Jun 12, 2018

🔬 Tracking issue for generic associated types (GAT) rust-lang/rust#44265

Closed

28 tasks

jackh726 mentioned this pull request May 4, 2022

Stabilize generic associated types rust-lang/rust#96709

Merged

5 tasks

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Finish implementing GATs #134

Finish implementing GATs #134

tmandry commented May 21, 2018 •

edited

Loading

tmandry commented May 23, 2018

scalexm left a comment •

edited

Loading

scalexm May 23, 2018

scalexm May 23, 2018

scalexm May 23, 2018

scalexm May 23, 2018

scalexm May 23, 2018

scalexm May 23, 2018 •

edited

Loading

scalexm May 23, 2018

scalexm May 23, 2018

scalexm May 23, 2018

tmandry May 24, 2018

scalexm May 23, 2018

nikomatsakis left a comment

		@@ -217,7 +217,7 @@ fn projection_type_in_header() {

		// Projection types in an impl header are not assumed to be well-formed,
		// an explicit where clause is needed (see below).

Finish implementing GATs #134

Finish implementing GATs #134

Conversation

tmandry commented May 21, 2018 • edited Loading

tmandry commented May 23, 2018

scalexm left a comment • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

scalexm May 23, 2018 • edited Loading

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

Choose a reason for hiding this comment

nikomatsakis left a comment

Choose a reason for hiding this comment

tmandry commented May 21, 2018 •

edited

Loading

scalexm left a comment •

edited

Loading

scalexm May 23, 2018 •

edited

Loading