NES controller USB adapter

LUFA-based USB adapter for up to 4 NES (Nintendo Entertainment System) controllers. Works great with LAKKA/RetroArch (see below for configuration).

Once connected to your pc, it will be detected as 4 generic joysticks with 4 buttons each.

Tested with Minimus AVR (atmega32u2) and cheap NES controller replicas (famiclone joysticks the previous renter left in my house).

Index

• Connections
  • NES connector pinout
  • Pin map
• How To Flash the ROM
  • Windows instructions
• LAKKA pad configuration
• Credits
• Loose ends

Connections

NES connector pinout

           ____
          /  O |  GND
    VCC  | O O |  CLOCK
    NC   | O O |  LATCH
    NC   | O O |  DATA
         -------

Pin map

Minimus	NES
PD0	DATA 1
PD1	DATA 2
PD2	LATCH
PD3	CLOCK
PD4	DATA 3
PD5	DATA 4
GND	GND
VCC	VCC

How To Flash the ROM

The following instructions will work on Ubuntu based linux distros:

• install dependencies

  sudo apt install -y avr-libc dfu-programmer

• clone LUFA and NesAdapter in the same directory

  git clone https://github.com/abcminiuser/lufa.git
  git clone https://github.com/sanzoghenzo/nes_adapter

• move to nes_adapter directory

  cd nes_adapter

• build the ROM

  make all

• If everything went fine, set the Minimus AVR in programming mode:

  • Hold the HWB button
  • Press and release the RST button
  • Release HWB

• Flash the ROM:

  make dfu

• Enjoy!

Windows instructions

You can use WSL (Windows Subsystem on Linux) to build the ROM in the same way as on Ubuntu.

The only thing that don't work is the actual ROM flashing, for which you need QMK Toolbox instead of dfu-programmer.

The commands to type become:

sudo apt install -y avr-libc
git clone https://github.com/abcminiuser/lufa.git
git clone https://github.com/sanzoghenzo/nes_adapter
cd nes_adapter
make all

Then use QMK Toolbox to flash the ROM.

LAKKA pad configuration

Simply place the joypad configuration file in /storage/joypads/udev folder. See here for details on how to access LAKKA filesystem on a remote machine.

Credits

Heavily based on Nintendo Four Score USB Joystick Adapter by Simon Inns.

Since I have a Minimus AVR and no Four Score, I removed Fire and Player buttons from his code.

Loose ends

This code could be easily modified to use a SNES (Super Nintendo) controller. In fact, I started to set it up, but then I realized most of the 8 buttons in my joysticks were fake... Damn you famiclones! You can find some trace of "SNES" parts in the code. Since I haven't tested them, I left them commented.