Fan curves additional information

[Helium100]

Hi,
I would like to share the Armoury Crate behavior on my PC, I thought this might help to contribute to the g-helper's fan curves multi-plateform accuracy:

On GV301QE (FlowX13 2021) :
-The temperature monitor start from 30° and end up to 110° (instead of 100° of the current g-helper version)
-The maximum RPM is well estimated by the "calibrate" function: CPU : 9200, GPU : 7500
-The minimum or 1% RPM (just before OFF) seems not good, actually on my PC it is : CPU : 2500, GPU : 2500 (but g-helper 1% is not accurately set to: CPU : 1800, GPU : 1800)

Additionaly, It seems that Armoury crate curves setting has the following constraints:
-8 adjustable points only: each points can be adjusted in an interval range from 0° to 9°: there is only one point cursor on each ten degrees intervall starting from 30° (ending to 109°) with no intervall overlapping

I can also share the default values for reference:
CPU default profile points' coordinates: 8%,39° ; 17%,49° ; 26%,59° ; 32%,65° ; 46%,70° ; 76%,80° ; 76%,90° ; 94%,100°
GPU default profile points' coordinates: 6%,39° ; 18%,49° ; 26%,59° ; 37%,65° ; 61%,70° ; 68%,80° ; 68%,90° ; 88%,100°

Hope this will be useful

Minimum CPU fan RPM before off:

Minimum GPU fan RPM before off:

Adjustable points on curve CPU : lowest values & interval

Adjustable points on curve GPU : lowest values & interval

Maximum CPU & GPU fan RPM + highest values & interval