pingbeat-example.yml

################### Pingbeat Configuration Example #########################

############################# Input ############################################
input:

  # Loop every 5 seconds
  period: 5
  # Use raw sockets for ping
  # Requires root!
  privileged: true
  # Whether to perform IPv4/v6 pings
  useipv4: true
  useipv6: false

  # List targets under the tag you want assigned to
  targets:
    # tag: google
    google:
      - google.com.au
      - google.com

############################# Output ##########################################

# Configure what outputs to use when sending the data collected by the beat.
# You can enable one or multiple outputs by setting enabled option to true.
output:

  ### Elasticsearch as output
  elasticsearch:

    # Array of hosts to connect to.
    # Scheme and port can be left out and will be set to the default (http and 9200)
    # In case you specify and additional path, the scheme is required: http://localhost:9200/path
    # IPv6 addresses should always be defined as: https://[2001:db8::1]:9200
    hosts: ["localhost:9200"]

    # Optional protocol and basic auth credentials. These are deprectad
    #protocol: "https"
    #username: "admin"
    #password: "s3cr3t"

    # Number of workers per Elasticsearch host.
    #worker: 1

    # Optional index name. The default is "pingbeat" and generates
    # [pingbeat-]YYYY.MM.DD keys.
    #index: "pingbeat"

    # Optional HTTP Path
    #path: "/elasticsearch"

    # The number of times a particular Elasticsearch index operation is attempted. If
    # the indexing operation doesn't succeed after this many retries, the events are
    # dropped. The default is 3.
    #max_retries: 3

    # The maximum number of events to bulk in a single Elasticsearch bulk API index request.
    # The default is 50.
    #bulk_max_size: 50

    # Configure http request timeout before failing an request to Elasticsearch.
    #timeout: 90

    # The number of seconds to wait for new events between two bulk API index requests.
    # If `bulk_max_size` is reached before this interval expires, addition bulk index
    # requests are made.
    #flush_interval

    # tls configuration
    #tls:
      # If disabled is set to true, the tls section will be ignored and the
      # host its certificate authorities will be used.
      #disabled: true

      # List of root certificates for HTTPS server verifications
      #certificate_authorities: ["/etc/pki/root/ca.pem"]

      # Certificate for TLS client authentication
      #certificate: "/etc/pki/client/cert.pem"

      # Client Certificate Key
      #certificate_key: "/etc/pki/client/cert.key"

      # Controls whether the client verifies server certificates and host name.
      # If insecure is set to true, all server host names and certificates will be
      # accepted. In this mode TLS based connections are susceptible to
      # man-in-the-middle attacks. Use only for testing.
      #insecure: true

      # Configure cipher suites to be used for TLS connections
      #cipher_suites: []

      # Configure curve types for ECDHE based cipher suites
      #curve_types: []

      # Configure minimum TLS version allowed for connection to logstash
      #min_version: 1.0

      # Configure maximum TLS version allowed for connection to logstash
      #max_version: 1.2


  ### Logstash as output
  #logstash:
    # The Logstash hosts
    #hosts: ["localhost:5044", "logstash:5045"]

    # Number of workers per Logstash host.
    #worker: 1

    # Optional load balance the events between the Logstash hosts
    #loadbalance: true

    # Optional index name. The default index name is pingbeat
    #index: pingbeat

    # Optional TLS. By default is off.
    #tls:
      #disabled: true

      # List of root certificates for HTTPS server verifications
      #certificate_authorities: ["/etc/pki/root/ca.pem"]

      # Certificate for TLS client authentication
      #certificate: "/etc/pki/client/cert.pem"

      # Client Certificate Key
      #certificate_key: "/etc/pki/client/cert.key"

      # Controls whether the client verifies server certificates and host name.
      # If insecure is set to true, all server host names and certificates will be
      # accepted. In this mode TLS based connections are susceptible to
      # man-in-the-middle attacks. Use only for testing.
      #insecure: true

      # Configure cipher suites to be used for TLS connections
      #cipher_suites: []

      # Configure curve types for ECDHE based cipher suites
      #curve_types: []

      # Configure minimum TLS version allowed for connection to logstash
      #min_version: 1.0

      # Configure maximum TLS version allowed for connection to logstash
      #max_version: 1.2


  ### File as output
  #file:
    # Path to the directory where to save the generated files. The option is mandatory.
    #path: "/tmp/pingbeat"

    # Name of the generated files. The default is `pingbeat` and it generates
    # files: `pingbeat`, `pingbeat.1`, `pingbeat.2`, etc.
    #filename: pingbeat

    # Maximum size in kilobytes of each file. When this size is reached, the files are
    # rotated. The default value is 10 MB.
    #rotate_every_kb: 10000

    # Maximum number of files under path. When this number of files is reached, the
    # oldest file is deleted and the rest are shifted from last to first. The default
    # is 7 files.
    #number_of_files: 7


  ### Console output
  # console:
    # pretty print json event
    #pretty: false

############################# Shipper #########################################

shipper:
  # The name of the shipper that publishes the network data. It can be used to group
  # all the transactions sent by a single shipper in the web interface.
  # If this options is not defined, the hostname is used.
  #name:

  # The tags of the shipper are included in their own field with each
  # transaction published. Tags make it easy to group servers by different
  # logical properties.
  #tags: ["service-X", "web-tier"]

  # Uncomment the following if you want to ignore transactions created
  # by the server on which the shipper is installed. This option is useful
  # to remove duplicates if shippers are installed on multiple servers.
  #ignore_outgoing: true


############################# Logging #########################################

#logging:
  # Send all logging output to syslog. On Windows default is false, otherwise
  # default is true.
  #to_syslog: true

  # Write all logging output to files. Beats automatically rotate files if configurable
  # limit is reached.
  #to_files: false

  # Enable debug output for selected components.
  #selectors: []

  # Set log level
  #level: error

  #files:
    # The directory where the log files will written to.
    #path: /var/log/mybeat

    # The name of the files where the logs are written to.
    #name: mybeat

    # Configure log file size limit. If limit is reached, log file will be
    # automatically rotated
    #rotateeverybytes: 10485760 # = 10MB

    # Number of rotated log files to keep. Oldest files will be deleted first.
    #keepfiles: 7