v0.8.0

What's Changed

• Add SPI frame format config method by @repnop in #280
• various i2c fixes by @sjoerdsimons in #282
• Fix PWM example by @VersBinarii in #285
• Use cortex-m-rtic instead of cortex-m-rtfm by @eldruin in #297
• Fix typo in examples/spi-dma.rs by @david-sawatzke in #289
• Added support for SPI Alternate configuration on Mosi and Sck pins by @johnnyegel in #291
• Support for CAN peripherals with the bxcan crate by @timokroeger in #293
• Fix SPI3 alternate function remapping. by @AndreySmirnov81 in #312
• Add DAC, UART4, UART5 clock in RCC for the f103 high density line by @AndreySmirnov81 in #318
• USB-SERIAL_NOTES: add note to inform user to build in release mode by @zacck in #326
• Timer additions: raw access to prescaler and auto-reload by @Windfisch in #322
• SCK, MISO, MOSI by @burrbull in #340
• Do not enable UART DMA flags unconditionally by @Windfisch in #336
• add bors by @burrbull in #345
• clippy by @burrbull in #346
• Add DMA RX and RX/TX support to SPI by @Windfisch in #335
• Add serial port Idle interrupt by @gqf2008 in #342
• Add example of GPIO input mode by @YuaXan in #316
• Use CamelCase for gpio::Edge enum variants by @Piroro-hs in #303
• Const generic GPIOs by @burrbull in #343
• Rcc bit-band by @burrbull in #344
• bxcan update by @burrbull in #348
• Example of using i2c with the bme280 air sensor by @fishrockz in #313
• From for i2c::Mode by @burrbull in #349
• Update USB driver by @Disasm in #320
• add DMA support for ADC3 by @apeng2012 in #353
• Simplify serial by @burrbull in #354
• Add serial is_rxne is_idle is_txe by @gqf2008 in #360
• Fix failing flash verification on erase by @Windfisch in #362
• Allow PullUp and PullDown inputs for timer pwm_input and qei by @Windfisch in #357
• Allow all pullup inputs by @Windfisch in #359
• Allow pullup inputs and opendrain outputs by @Windfisch in #358
• Derive PartialOrd for time module types by @nankeen in #364
• Use max frequency and round down when calculating PCLK1 by @jasLogic in #365
• update dependencies by @burrbull in #366
• rcc config by @burrbull in #337
• pll enable & rcc_config_usb test by @burrbull in #368
• Fix, enable PWR clock before accessing the PWR_CR by @apeng2012 in #372
• Use modify instead of write by @gnxlxnxx in #373
• RTC clock source can be selected by @apeng2012 in #377
• update & clean deps by @burrbull in #379
• v0.8.0 by @burrbull in #380

New Contributors

• @repnop made their first contribution in #280
• @sjoerdsimons made their first contribution in #282
• @VersBinarii made their first contribution in #285
• @eldruin made their first contribution in #297
• @david-sawatzke made their first contribution in #289
• @johnnyegel made their first contribution in #291
• @AndreySmirnov81 made their first contribution in #312
• @zacck made their first contribution in #326
• @gqf2008 made their first contribution in #342
• @YuaXan made their first contribution in #316
• @Piroro-hs made their first contribution in #303
• @fishrockz made their first contribution in #313
• @apeng2012 made their first contribution in #353
• @nankeen made their first contribution in #364
• @jasLogic made their first contribution in #365
• @gnxlxnxx made their first contribution in #373

Full Changelog: v0.7.0...v0.8.0