Change phases and Requested current to high

[fox-on-tour]

Hi there,

thank you for the integration - Works reliably so far.
But i have two questions:

1. Is there a way to change the phases from 1 to 3?
2. Why can I increase the slide controller named as "Requested current" which obviously increases/decreases current ampere value to max 32 amps even though my 11kw box can only handle a maximum of 16 amps?

Thank you so far.

Best regards,

fox

[syssi]

1. The switch entity force single phases can be used to switch from 3 phases to 1.
2. The component supports the 22kw version of the device too. It's a bit tricky to ask the device about the supported limits/feature and apply these constraints to the different entities. As an interim solution we could make to type (11kw vs. 22kw) configurable via the config flow. So we can set the limits easily depending on the configuration.

[fox-on-tour]

Hi syssi,

thank you for your fast response.
to 1. -> Works, thank you for clarifying.
to 2. -> thank you for the explanation. I had already suspected something like that. Giving the user the possibility to choose between 11kw and 22kw during the configuration would be awesome and for me a good solution.

Thank you for your work and all the best.