Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

ur5_arm_should_pan_joint could not find #17

Closed
k-okada opened this issue Jan 13, 2016 · 8 comments
Closed

ur5_arm_should_pan_joint could not find #17

k-okada opened this issue Jan 13, 2016 · 8 comments

Comments

@k-okada
Copy link
Member

k-okada commented Jan 13, 2016 

[ERROR] [1452653867.328798537, 1.573000000]: Could not find joint 'ur5_arm_shoulder_pan_joint' in 'hardware_interface::PositionJointInterface'.
[ERROR] [1452653867.328956419, 1.573000000]: Failed to initialize the controller
[ERROR] [1452653867.328991291, 1.573000000]: Initializing controller 'arm_controller' failed
[ INFO] [1452653867.411139864, 1.646000000]: Controller state will be published at 50Hz.
[ INFO] [1452653867.413150075, 1.648000000]: Wheel separation will be multiplied by 1.875.
[ INFO] [1452653867.414365974, 1.649000000]: Wheel radius will be multiplied by 1.
[ INFO] [1452653867.415614569, 1.651000000]: Velocity commands will be considered old if they are older than 0.25s.
[ INFO] [1452653867.417001662, 1.652000000]: Base frame_id set to base_link
[ INFO] [1452653867.418274011, 1.654000000]: Publishing to tf is disabled
[ INFO] [1452653867.438580633, 1.672000000]: left wheel to origin: 0.256,0.2854, 0.03282
[ INFO] [1452653867.438631038, 1.672000000]: right wheel to origin: 0.256,-0.2854, 0.03282
[ INFO] [1452653867.438712912, 1.672000000]: Odometry params : wheel separation 1.07025, wheel radius 0.17775
[ INFO] [1452653867.443431740, 1.677000000]: Adding left wheel with joint name: front_left_wheel and right wheel with joint name: front_right_wheel
[ INFO] [1452653867.443506519, 1.678000000]: Adding left wheel with joint name: rear_left_wheel and right wheel with joint name: rear_right_wheel
[ERROR] [WallTime: 1452653868.330195] [2.565000] Failed to load arm_controller

Are you sure that you can move arms without loading arm_controlelr?
@k-okada
Copy link
Member Author

k-okada commented Jan 13, 2016

this happens for deb configuration

source /opt/ros/indigo/setup.bash
roslaunch husky_gazebo husky_empty_world.launch ur5_enabled:=true

@tongtybj
Copy link
Member

this should work as follows:

bakui@bakui-ThinkPad-W510:~$ `ROBOT_INITIAL_POSE="-y 65 -x 25 -Y -1.57" roslaunch jsk_mbzirc_ugv_sim husky_mbzirc.launch`

Gazebo multi-robot simulator, version 2.2.3
Copyright (C) 2012-2014 Open Source Robotics Foundation.
Released under the Apache 2 License.
http://gazebosim.org

Gazebo multi-robot simulator, version 2.2.3
Copyright (C) 2012-2014 Open Source Robotics Foundation.
Released under the Apache 2 License.
http://gazebosim.org

Msg Waiting for masterMsg Connected to gazebo master @ http://127.0.0.1:11345
Msg Publicized address: 192.168.97.220
Msg Waiting for masterMsg Connected to gazebo master @ http://127.0.0.1:11345
Msg Publicized address: 192.168.97.220
[ERROR] [1452654882.825482959]: Semantic description is not specified for the same robot as the URDF
[ERROR] [1452654884.820987912, 170.904000000]: Semantic description is not specified for the same robot as the URDF
Warning [parser_urdf.cc:1010] multiple inconsistent <gravity> exists due to fixed joint reduction overwriting previous value [false] with [true].
Warning [parser_urdf.cc:1010] multiple inconsistent <gravity> exists due to fixed joint reduction overwriting previous value [true] with [false].
Warning [parser_urdf.cc:1010] multiple inconsistent <self_collide> exists due to fixed joint reduction overwriting previous value [true] with [false].
[ERROR] [1452654887.806552497, 172.216000000]: No type element found in transmission 'r_gripper_trans'.
[ERROR] [1452654889.140837681, 172.509000000]: Can't accept new action goals. Controller is not running.
[ERROR] [1452654891.214495505, 173.687000000]: MoveitSimpleControllerManager: No type specified for controller r_gripper_controller
[ERROR] [1452654893.640424731, 175.223000000]: Semantic description is not specified for the same robot as the URDF
[ERROR] [1452654895.367573852, 176.121000000]: Semantic description is not specified for the same robot as the URDF

@tongtybj
Copy link
Member 

src/aerial_robot
  indigo
* indigo-dev
  indigo-dev2
  master
src/husky
* gripper-addition
  indigo-devel
diff --git a/husky_control/config/control_ur5.yaml b/husky_control/config/contro
index faacf92..cdbfa81 100644
--- a/husky_control/config/control_ur5.yaml
+++ b/husky_control/config/control_ur5.yaml
@@ -1,5 +1,5 @@
 arm_controller:
-  type: effort_controllers/JointTrajectoryController
+  type: position_controllers/JointTrajectoryController
   topic: "test"
   joints:
      - ur5_arm_shoulder_pan_joint
src/husky_customization
* indigo-devel
src/husky_desktop
* indigo-devel
src/husky_robot
* indigo-devel
src/husky_simulator
* gripper-and-roscontrol-fix
  indigo-devel
src/mbzirc
  drone-simulation
* husky-simulation
  indigo-devel
  ls
  master
src/sensor_interface
* indigo-devel
  master
src/universal_robot
* indigo-devel

@tongtybj
Copy link
Member 

$ ROBOT_INITIAL_POSE="-y 65 -x 25 -Y -1.57" roslaunch jsk_mbzirc_ugv_sim husky_mbzirc.launch
... logging to /home/bakui/.ros/log/6d606e28-b9aa-11e5-833f-f0def108e351/roslaunch-bakui-ThinkPad-W510-28788.log
Checking log directory for disk usage. This may take awhile.
Press Ctrl-C to interrupt
Done checking log file disk usage. Usage is <1GB.

started roslaunch server http://bakui-ThinkPad-W510:44558/

SUMMARY
========

PARAMETERS
 * /arm_controller/action_monitor_rate: 10
 * /arm_controller/constraints/goal_time: 0.6
 * /arm_controller/constraints/stopped_velocity_tolerance: 0.5
 * /arm_controller/constraints/ur5_arm_elbow_joint/goal: 0.1
 * /arm_controller/constraints/ur5_arm_elbow_joint/trajectory: 0.1
 * /arm_controller/constraints/ur5_arm_shoulder_lift_joint/goal: 0.1
 * /arm_controller/constraints/ur5_arm_shoulder_lift_joint/trajectory: 0.1
 * /arm_controller/constraints/ur5_arm_shoulder_pan_joint/goal: 0.1
 * /arm_controller/constraints/ur5_arm_shoulder_pan_joint/trajectory: 0.1
 * /arm_controller/constraints/ur5_arm_wrist_1_joint/goal: 0.1
 * /arm_controller/constraints/ur5_arm_wrist_1_joint/trajectory: 0.1
 * /arm_controller/constraints/ur5_arm_wrist_2_joint/goal: 0.1
 * /arm_controller/constraints/ur5_arm_wrist_2_joint/trajectory: 0.1
 * /arm_controller/constraints/ur5_arm_wrist_3_joint/goal: 0.1
 * /arm_controller/constraints/ur5_arm_wrist_3_joint/trajectory: 0.1
 * /arm_controller/gains/ur5_arm_elbow_joint/d: 100.0
 * /arm_controller/gains/ur5_arm_elbow_joint/i: 500.0
 * /arm_controller/gains/ur5_arm_elbow_joint/i_clamp: 100.0
 * /arm_controller/gains/ur5_arm_elbow_joint/p: 10000
 * /arm_controller/gains/ur5_arm_shoulder_lift_joint/d: 100.0
 * /arm_controller/gains/ur5_arm_shoulder_lift_joint/i: 500.0
 * /arm_controller/gains/ur5_arm_shoulder_lift_joint/i_clamp: 100.0
 * /arm_controller/gains/ur5_arm_shoulder_lift_joint/p: 10000
 * /arm_controller/gains/ur5_arm_shoulder_pan_joint/d: 100.0
 * /arm_controller/gains/ur5_arm_shoulder_pan_joint/i: 500.0
 * /arm_controller/gains/ur5_arm_shoulder_pan_joint/i_clamp: 100.0
 * /arm_controller/gains/ur5_arm_shoulder_pan_joint/p: 10000
 * /arm_controller/gains/ur5_arm_wrist_1_joint/d: 0.0
 * /arm_controller/gains/ur5_arm_wrist_1_joint/i: 0.0
 * /arm_controller/gains/ur5_arm_wrist_1_joint/i_clamp: 0.0
 * /arm_controller/gains/ur5_arm_wrist_1_joint/p: 10000.0
 * /arm_controller/gains/ur5_arm_wrist_2_joint/d: 0.0
 * /arm_controller/gains/ur5_arm_wrist_2_joint/i: 0.0
 * /arm_controller/gains/ur5_arm_wrist_2_joint/i_clamp: 0.0
 * /arm_controller/gains/ur5_arm_wrist_2_joint/p: 10000.0
 * /arm_controller/gains/ur5_arm_wrist_3_joint/d: 0.0
 * /arm_controller/gains/ur5_arm_wrist_3_joint/i: 0.0
 * /arm_controller/gains/ur5_arm_wrist_3_joint/i_clamp: 0.0
 * /arm_controller/gains/ur5_arm_wrist_3_joint/p: 10000.0
 * /arm_controller/joints: ['ur5_arm_shoulde...
 * /arm_controller/state_publish_rate: 25
 * /arm_controller/stop_trajectory_duration: 0.5
 * /arm_controller/topic: test
 * /arm_controller/type: position_controll...
 * /ekf_localization/base_link_frame: base_link
 * /ekf_localization/frequency: 50
 * /ekf_localization/imu0: imu/data
 * /ekf_localization/imu0_config: [False, False, Fa...
 * /ekf_localization/imu0_differential: True
 * /ekf_localization/imu0_remove_gravitational_acceleration: True
 * /ekf_localization/odom0: husky_velocity_co...
 * /ekf_localization/odom0_config: [True, True, True...
 * /ekf_localization/odom0_differential: True
 * /ekf_localization/odom_frame: odom
 * /ekf_localization/two_d_mode: True
 * /ekf_localization/world_frame: odom
 * /husky_joint_publisher/publish_rate: 50
 * /husky_joint_publisher/type: joint_state_contr...
 * /husky_velocity_controller/angular/z/has_acceleration_limits: True
 * /husky_velocity_controller/angular/z/has_velocity_limits: True
 * /husky_velocity_controller/angular/z/max_acceleration: 6.0
 * /husky_velocity_controller/angular/z/max_velocity: 2.0
 * /husky_velocity_controller/base_frame_id: base_link
 * /husky_velocity_controller/cmd_vel_timeout: 0.25
 * /husky_velocity_controller/enable_odom_tf: False
 * /husky_velocity_controller/estimate_velocity_from_position: False
 * /husky_velocity_controller/left_wheel: ['front_left_whee...
 * /husky_velocity_controller/linear/x/has_acceleration_limits: True
 * /husky_velocity_controller/linear/x/has_velocity_limits: True
 * /husky_velocity_controller/linear/x/max_acceleration: 3.0
 * /husky_velocity_controller/linear/x/max_velocity: 1.0
 * /husky_velocity_controller/pose_covariance_diagonal: [0.001, 0.001, 0....
 * /husky_velocity_controller/publish_rate: 50
 * /husky_velocity_controller/right_wheel: ['front_right_whe...
 * /husky_velocity_controller/twist_covariance_diagonal: [0.001, 0.001, 0....
 * /husky_velocity_controller/type: diff_drive_contro...
 * /husky_velocity_controller/wheel_radius_multiplier: 1.0
 * /husky_velocity_controller/wheel_separation_multiplier: 1.875
 * /move_group/allow_trajectory_execution: True
 * /move_group/allowed_execution_duration_scaling: 1.2
 * /move_group/allowed_goal_duration_margin: 0.5
 * /move_group/arm_prefix: ur5_arm_
 * /move_group/capabilities: move_group/MoveGr...
 * /move_group/controller_list: [{'default': True...
 * /move_group/gripper/planner_configs: ['SBLkConfigDefau...
 * /move_group/jiggle_fraction: 0.05
 * /move_group/max_range: 5.0
 * /move_group/max_safe_path_cost: 1
 * /move_group/moveit_controller_manager: moveit_simple_con...
 * /move_group/moveit_manage_controllers: True
 * /move_group/octomap_frame: base_footprint
 * /move_group/octomap_resolution: 0.05
 * /move_group/planner_configs/BKPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/BKPIECEkConfigDefault/failed_expansion_score_factor: 0.5
 * /move_group/planner_configs/BKPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/BKPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/BKPIECEkConfigDefault/type: geometric::BKPIECE
 * /move_group/planner_configs/ESTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/ESTkConfigDefault/range: 0.0
 * /move_group/planner_configs/ESTkConfigDefault/type: geometric::EST
 * /move_group/planner_configs/KPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/KPIECEkConfigDefault/failed_expansion_score_factor: 0.5
 * /move_group/planner_configs/KPIECEkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/KPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/KPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/KPIECEkConfigDefault/type: geometric::KPIECE
 * /move_group/planner_configs/LBKPIECEkConfigDefault/border_fraction: 0.9
 * /move_group/planner_configs/LBKPIECEkConfigDefault/min_valid_path_fraction: 0.5
 * /move_group/planner_configs/LBKPIECEkConfigDefault/range: 0.0
 * /move_group/planner_configs/LBKPIECEkConfigDefault/type: geometric::LBKPIECE
 * /move_group/planner_configs/PRMkConfigDefault/max_nearest_neighbors: 10
 * /move_group/planner_configs/PRMkConfigDefault/type: geometric::PRM
 * /move_group/planner_configs/PRMstarkConfigDefault/type: geometric::PRMstar
 * /move_group/planner_configs/RRTConnectkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTConnectkConfigDefault/type: geometric::RRTCon...
 * /move_group/planner_configs/RRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/RRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTkConfigDefault/type: geometric::RRT
 * /move_group/planner_configs/RRTstarkConfigDefault/delay_collision_checking: 1
 * /move_group/planner_configs/RRTstarkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/RRTstarkConfigDefault/range: 0.0
 * /move_group/planner_configs/RRTstarkConfigDefault/type: geometric::RRTstar
 * /move_group/planner_configs/SBLkConfigDefault/range: 0.0
 * /move_group/planner_configs/SBLkConfigDefault/type: geometric::SBL
 * /move_group/planner_configs/TRRTkConfigDefault/frountierNodeRatio: 0.1
 * /move_group/planner_configs/TRRTkConfigDefault/frountier_threshold: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/goal_bias: 0.05
 * /move_group/planner_configs/TRRTkConfigDefault/init_temperature: 10e-6
 * /move_group/planner_configs/TRRTkConfigDefault/k_constant: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/max_states_failed: 10
 * /move_group/planner_configs/TRRTkConfigDefault/min_temperature: 10e-10
 * /move_group/planner_configs/TRRTkConfigDefault/range: 0.0
 * /move_group/planner_configs/TRRTkConfigDefault/temp_change_factor: 2.0
 * /move_group/planner_configs/TRRTkConfigDefault/type: geometric::TRRT
 * /move_group/planning_plugin: ompl_interface/OM...
 * /move_group/planning_scene_monitor/publish_geometry_updates: True
 * /move_group/planning_scene_monitor/publish_planning_scene: True
 * /move_group/planning_scene_monitor/publish_state_updates: True
 * /move_group/planning_scene_monitor/publish_transforms_updates: True
 * /move_group/request_adapters: default_planner_r...
 * /move_group/sensors: [{'far_clipping_p...
 * /move_group/start_state_max_bounds_error: 0.1
 * /move_group/trajectory_execution/execution_duration_monitoring: False
 * /move_group/ur5_arm/planner_configs: ['SBLkConfigDefau...
 * /move_group/use_controller_manager: False
 * /r_gripper_controller/joint: r_gripper_joint
 * /r_gripper_controller/pid/p: 1000.0
 * /r_gripper_controller/type: pr2_mechanism_con...
 * /robot_description: <?xml version="1....
 * /robot_description_kinematics/ur5_arm/kinematics_solver: ur_kinematics/UR5...
 * /robot_description_kinematics/ur5_arm/kinematics_solver_attempts: 3
 * /robot_description_kinematics/ur5_arm/kinematics_solver_search_resolution: 0.005
 * /robot_description_kinematics/ur5_arm/kinematics_solver_timeout: 0.005
 * /robot_description_planning/joint_limits/ur5_arm_elbow_joint/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/ur5_arm_elbow_joint/has_velocity_limits: True
 * /robot_description_planning/joint_limits/ur5_arm_elbow_joint/max_acceleration: 0
 * /robot_description_planning/joint_limits/ur5_arm_elbow_joint/max_velocity: 3.15
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_lift_joint/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_lift_joint/has_velocity_limits: True
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_lift_joint/max_acceleration: 0
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_lift_joint/max_velocity: 3.15
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_pan_joint/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_pan_joint/has_velocity_limits: True
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_pan_joint/max_acceleration: 0
 * /robot_description_planning/joint_limits/ur5_arm_shoulder_pan_joint/max_velocity: 3.15
 * /robot_description_planning/joint_limits/ur5_arm_wrist_1_joint/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/ur5_arm_wrist_1_joint/has_velocity_limits: True
 * /robot_description_planning/joint_limits/ur5_arm_wrist_1_joint/max_acceleration: 0
 * /robot_description_planning/joint_limits/ur5_arm_wrist_1_joint/max_velocity: 3.2
 * /robot_description_planning/joint_limits/ur5_arm_wrist_2_joint/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/ur5_arm_wrist_2_joint/has_velocity_limits: True
 * /robot_description_planning/joint_limits/ur5_arm_wrist_2_joint/max_acceleration: 0
 * /robot_description_planning/joint_limits/ur5_arm_wrist_2_joint/max_velocity: 3.2
 * /robot_description_planning/joint_limits/ur5_arm_wrist_3_joint/has_acceleration_limits: False
 * /robot_description_planning/joint_limits/ur5_arm_wrist_3_joint/has_velocity_limits: True
 * /robot_description_planning/joint_limits/ur5_arm_wrist_3_joint/max_acceleration: 0
 * /robot_description_planning/joint_limits/ur5_arm_wrist_3_joint/max_velocity: 3.2
 * /robot_description_semantic: <?xml version="1....
 * /rosdistro: indigo
 * /rosversion: 1.11.13
 * /rviz_bakui_ThinkPad_W510_28788_12725039173300956/arm_prefix: ur5_arm_
 * /rviz_bakui_ThinkPad_W510_28788_12725039173300956/ur5_arm/kinematics_solver: ur_kinematics/UR5...
 * /rviz_bakui_ThinkPad_W510_28788_12725039173300956/ur5_arm/kinematics_solver_attempts: 3
 * /rviz_bakui_ThinkPad_W510_28788_12725039173300956/ur5_arm/kinematics_solver_search_resolution: 0.005
 * /rviz_bakui_ThinkPad_W510_28788_12725039173300956/ur5_arm/kinematics_solver_timeout: 0.005
 * /twist_mux/locks: [{'topic': 'e_sto...
 * /twist_mux/topics: [{'topic': 'joy_t...
 * /use_sim_time: True

NODES
  /
    arm_controller_spawner (controller_manager/spawner)
    base_controller_spawner (controller_manager/spawner)
    ekf_localization (robot_localization/ekf_localization_node)
    fake_joint_calibration (rostopic/rostopic)
    gazebo (gazebo_ros/gzserver)
    gazebo_gui (gazebo_ros/gzclient)
    move_group (moveit_ros_move_group/move_group)
    r_gripper_controller_spawner (pr2_controller_manager/spawner)
    robot_state_publisher (robot_state_publisher/robot_state_publisher)
    rviz_bakui_ThinkPad_W510_28788_12725039173300956 (rviz/rviz)
    spawn_husky_model (gazebo_ros/spawn_model)
    stow_ur5 (husky_control/stow_ur5)
    twist_mux (twist_mux/twist_mux)

auto-starting new master
process[master]: started with pid [28803]
ROS_MASTER_URI=http://localhost:11311

setting /run_id to 6d606e28-b9aa-11e5-833f-f0def108e351
process[rosout-1]: started with pid [28817]
started core service [/rosout]
process[gazebo-2]: started with pid [28841]
process[gazebo_gui-3]: started with pid [28848]
Gazebo multi-robot simulator, version 2.2.3
Copyright (C) 2012-2014 Open Source Robotics Foundation.
Released under the Apache 2 License.
http://gazebosim.org

Gazebo multi-robot simulator, version 2.2.3
Copyright (C) 2012-2014 Open Source Robotics Foundation.
Released under the Apache 2 License.
http://gazebosim.org

process[robot_state_publisher-4]: started with pid [28858]
[ INFO] [1452657740.676245014]: Finished loading Gazebo ROS API Plugin.
�[1;[ INFO] [1452657740.677242567]: waitForService: Service [/gazebo/set_physics_properties] has not been advertised, waiting...
32mMsg Waiting for master
Msg Connected to gazebo master @ http://127.0.0.1:11345
Msg Publicized address: 192.168.97.220
Msg Waiting for master
Msg Connected to gazebo master @ http://127.0.0.1:11345
Msg Publicized address: 192.168.97.220
process[base_controller_spawner-5]: started with pid [28987]
Warning [ModelDatabase.cc:334] Getting models from[http://gazebosim.org/models/]. This may take a few seconds.
process[ekf_localization-6]: started with pid [29024]
process[twist_mux-7]: started with pid [29131]
process[arm_controller_spawner-8]: started with pid [29194]
process[fake_joint_calibration-9]: started with pid [29220]
process[stow_ur5-10]: started with pid [29228]
process[r_gripper_controller_spawner-11]: started with pid [29268]
process[spawn_husky_model-12]: started with pid [29294]
process[move_group-13]: started with pid [29315]
[ERROR] [1452657748.426210524]: Semantic description is not specified for the same robot as the URDF
[ INFO] [1452657748.426809148]: Loading robot model 'husky_robot_gazebo'...
[ INFO] [1452657748.426880097]: No root joint specified. Assuming fixed joint
process[rviz_bakui_ThinkPad_W510_28788_12725039173300956-14]: started with pid [29376]
[ INFO] [1452657749.412355347]: rviz version 1.11.8
[ INFO] [1452657749.412433975]: compiled against OGRE version 1.8.1 (Byatis)
[ERROR] [1452657749.992870382]: Semantic description is not specified for the same robot as the URDF
[ INFO] [1452657749.993283922]: Loading robot model 'husky_robot_gazebo'...
[ INFO] [1452657749.993333333]: No root joint specified. Assuming fixed joint
[ INFO] [1452657750.352060635]: Stereo is NOT SUPPORTED
[ INFO] [1452657750.352226990]: OpenGl version: 3.3 (GLSL 3.3).
[ INFO] [1452657751.644781384]: Publishing maintained planning scene on 'monitored_planning_scene'
[ INFO] [1452657751.649422891]: MoveGroup debug mode is OFF
Starting context monitors...
[ INFO] [1452657751.649463651]: Starting scene monitor
[ INFO] [1452657751.653832428]: Listening to '/planning_scene'
[ INFO] [1452657751.653868366]: Starting world geometry monitor
[ INFO] [1452657751.659102511]: Listening to '/collision_object' using message notifier with target frame '/base_link '
[ INFO] [1452657751.663499215]: Listening to '/planning_scene_world' for planning scene world geometry
[ INFO] [1452657754.357751378]: Listening to '/attached_collision_object' for attached collision objects
Context monitors started.
[ INFO] [1452657754.590944437]: Initializing OMPL interface using ROS parameters
[ INFO] [1452657754.648716468]: Using planning interface 'OMPL'
[ INFO] [1452657754.816372490]: Param 'default_workspace_bounds' was not set. Using default value: 10
[ INFO] [1452657754.817617870]: Param 'start_state_max_bounds_error' was set to 0.1
[ INFO] [1452657754.818794265]: Param 'start_state_max_dt' was not set. Using default value: 0.5
[ INFO] [1452657754.820125108]: Param 'start_state_max_dt' was not set. Using default value: 0.5
[ INFO] [1452657754.821402819]: Param 'jiggle_fraction' was set to 0.05
[ INFO] [1452657754.822792343]: Param 'max_sampling_attempts' was not set. Using default value: 100
[ INFO] [1452657754.822898201]: Using planning request adapter 'Add Time Parameterization'
[ INFO] [1452657754.822948240]: Using planning request adapter 'Fix Workspace Bounds'
[ INFO] [1452657754.822988743]: Using planning request adapter 'Fix Start State Bounds'
[ INFO] [1452657754.823031161]: Using planning request adapter 'Fix Start State In Collision'
[ INFO] [1452657754.823069875]: Using planning request adapter 'Fix Start State Path Constraints'
[WARN] [WallTime: 1452657772.647200] [0.000000] Controller Spawner couldn't find the expected controller_manager ROS interface.
[base_controller_spawner-5] process has finished cleanly
log file: /home/bakui/.ros/log/6d606e28-b9aa-11e5-833f-f0def108e351/base_controller_spawner-5*.log
[WARN] [WallTime: 1452657775.596162] [0.000000] Controller Spawner couldn't find the expected controller_manager ROS interface.
[arm_controller_spawner-8] process has finished cleanly
log file: /home/bakui/.ros/log/6d606e28-b9aa-11e5-833f-f0def108e351/arm_controller_spawner-8*.log
Error [ModelDatabase.cc:407] Unable to download model[model://arena_old/meshes/100x60.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://eight/meshes/eight.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://pad/meshes/10x10.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://start/meshes/start.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://pad/meshes/10x10.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://panel/meshes/panel.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://stem/meshes/stem.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [MeshShape.cc:64] No mesh specified
Warning [parser_urdf.cc:1010] multiple inconsistent <gravity> exists due to fixed joint reduction overwriting previous value [false] with [true].
Warning [parser_urdf.cc:1010] multiple inconsistent <gravity> exists due to fixed joint reduction overwriting previous value [true] with [false].
Warning [parser_urdf.cc:1010] multiple inconsistent <self_collide> exists due to fixed joint reduction overwriting previous value [true] with [false].
Msg Waiting for model database update to complete...
[spawn_husky_model-12] process has finished cleanly
log file: /home/bakui/.ros/log/6d606e28-b9aa-11e5-833f-f0def108e351/spawn_husky_model-12*.log
[ INFO] [1452657834.537370438, 164.425000000]: MoveitSimpleControllerManager: Waiting for arm_controller/follow_joint_trajectory to come up
[ INFO] [1452657834.984742433, 164.425000000]: Laser Plugin (robotNamespace = /), Info: Using the 'robotNamespace' param: '/'
[ INFO] [1452657834.984856207, 164.425000000]: Starting Laser Plugin (ns = /)!
[ INFO] [1452657834.988467206, 164.425000000]: Laser Plugin (ns = /)  <tf_prefix_>, set to ""
Error [ModelDatabase.cc:407] Unable to download model[model://pad/meshes/10x10.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://pad/meshes/10x10.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://stem/meshes/stem.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://arena_old/meshes/100x60.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://eight/meshes/eight.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://panel/meshes/panel.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://start/meshes/start.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://pad/meshes/10x10.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://pad/meshes/10x10.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://stem/meshes/stem.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://arena_old/meshes/100x60.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://eight/meshes/eight.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://panel/meshes/panel.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
Error [ModelDatabase.cc:407] Unable to download model[model://start/meshes/start.dae]
Error [SystemPaths.cc:367] File or path does not exist[""]
Error [Visual.cc:2133] No mesh specified
[ INFO] [1452657835.293327364, 164.425000000]: Loading gazebo_ros_control plugin
[ INFO] [1452657835.293491267, 164.425000000]: Starting gazebo_ros_control plugin in namespace: /
[ INFO] [1452657835.294864394, 164.425000000]: gazebo_ros_control plugin is waiting for model URDF in parameter [robot_description] on the ROS param server.
[ERROR] [1452657835.399539262, 164.425000000]: No type element found in transmission 'r_gripper_trans'.
[ INFO] [1452657835.668044831, 164.425000000]: Loaded gazebo_ros_control.
[ INFO] [1452657835.674318935, 164.425000000]: f3d plugin missing <frameName>, defaults to world
[ INFO] [1452657835.682393639, 164.425000000]: imu plugin missing <xyzOffset>, defaults to 0s
[ INFO] [1452657835.682461174, 164.425000000]: imu plugin missing <rpyOffset>, defaults to 0s
[ INFO] [1452657835.821879168, 164.446000000]: waitForService: Service [/gazebo/set_physics_properties] is now available.
[ INFO] [1452657835.871099478, 164.490000000]: Physics dynamic reconfigure ready.
[ERROR] [1452657837.589842232, 166.163000000]: Semantic description is not specified for the same robot as the URDF
[ INFO] [1452657837.590833454, 166.164000000]: Loading robot model 'husky_robot_gazebo'...
[ INFO] [1452657837.590926042, 166.164000000]: No root joint specified. Assuming fixed joint
[ERROR] [1452657839.287507983, 167.751000000]: Semantic description is not specified for the same robot as the URDF
[ INFO] [1452657839.288096475, 167.751000000]: Loading robot model 'husky_robot_gazebo'...
[ INFO] [1452657839.288156798, 167.751000000]: No root joint specified. Assuming fixed joint
[ INFO] [1452657840.976151283, 169.349000000]: Starting scene monitor
[ INFO] [1452657840.982641515, 169.355000000]: Listening to '/move_group/monitored_planning_scene'
[ INFO] [1452657840.984359577, 169.356000000]: waitForService: Service [/get_planning_scene] has not been advertised, waiting...
[ INFO] [1452657841.056780336, 169.425000000]: MoveitSimpleControllerManager: Waiting for arm_controller/follow_joint_trajectory to come up
[ WARN] [1452657846.265961527, 174.373000000]: Failed to call service /get_planning_scene, have you launched move_group? at /tmp/buildd/ros-indigo-moveit-ros-planning-0.6.5-0trusty-20150912-1730/planning_scene_monitor/src/planning_scene_monitor.cpp:461
[ERROR] [1452657846.320951043, 174.425000000]: MoveitSimpleControllerManager: Action client not connected: arm_controller/follow_joint_trajectory
[ERROR] [1452657846.415546350, 174.515000000]: MoveitSimpleControllerManager: No type specified for controller r_gripper_controller
[ INFO] [1452657846.415666690, 174.515000000]: Returned 0 controllers in list
[ INFO] [1452657846.432631157, 174.531000000]: Trajectory execution is managing controllers
Loading 'move_group/MoveGroupCartesianPathService'...
Loading 'move_group/MoveGroupExecuteService'...
Loading 'move_group/MoveGroupKinematicsService'...
Loading 'move_group/MoveGroupMoveAction'...
Loading 'move_group/MoveGroupPickPlaceAction'...
Loading 'move_group/MoveGroupPlanService'...
Loading 'move_group/MoveGroupQueryPlannersService'...
Loading 'move_group/MoveGroupStateValidationService'...
Loading 'move_group/MoveGroupGetPlanningSceneService'...
Loading 'move_group/ClearOctomapService'...
[ INFO] [1452657846.885630230, 174.960000000]: 

********************************************************
* MoveGroup using: 
*     - CartesianPathService
*     - ExecutePathService
*     - KinematicsService
*     - MoveAction
*     - PickPlaceAction
*     - MotionPlanService
*     - QueryPlannersService
*     - StateValidationService
*     - GetPlanningSceneService
*     - ExecutePathService
********************************************************

[ INFO] [1452657846.885704307, 174.960000000]: MoveGroup context using planning plugin ompl_interface/OMPLPlanner
[ INFO] [1452657846.885733752, 174.960000000]: MoveGroup context initialization complete

All is well! Everyone is happy! You can start planning now!

[ INFO] [1452657851.899533074, 179.851000000]: Constructing new MoveGroup connection for group 'ur5_arm' in namespace ''
[ INFO] [1452657852.675361108, 180.574000000]: Ready to take MoveGroup commands for group ur5_arm.
[ INFO] [1452657852.675441680, 180.574000000]: Looking around: no
[ INFO] [1452657852.675494776, 180.574000000]: Replanning: no

@tongtybj
Copy link
Member

roslaunch-bakui-ThinkPad-W510-28788.log.txt

@tongtybj
Copy link
Member

arm_controller_spawner-8.log.txt
arm_controller_spawner-8-stdout.log.txt
Uploading base_controller_spawner-5.log.txt…
Uploading base_controller_spawner-5-stdout.log.txt…

Uploading fake_joint_calibration-9.log.txt…
Uploading fake_joint_calibration-9-stdout.log.txt…
Uploading master.log.txt…
Uploading r_gripper_controller_spawner-11.log.txt…

Uploading robot_state_publisher-4-stdout.log.txt…
Uploading roslaunch-bakui-ThinkPad-W510-28788.log.txt…
Uploading rosout.log.txt…
Uploading rosout-1-stdout.log.txt…
Uploading spawn_husky_model-12.log.txt…
Uploading spawn_husky_model-12-stdout.log.txt…
Uploading stow_ur5-10.log.txt…
Uploading stow_ur5-10-stdout.log.txt…
Uploading twist_mux-7-stdout.log.txt…

@k-okada
Copy link
Member Author

k-okada commented Jan 13, 2016

@tongtybj you're running at huskey_simulaiton branch and I suspect you will have same issue if you run on indigo-devel branch

@k-okada
Copy link
Member Author

k-okada commented Jan 13, 2016

this turns out we need latest ur_simulation from source code, deb version 1.1.5 is not working well.

@k-okada k-okada closed this as completed Jan 13, 2016
@k-okada k-okada mentioned this issue Jan 13, 2016
Open
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@k-okada @tongtybj