This is a demo code is to provide support for the Curiosity High Pin Count (HPC) development board using the PIC18F47Q43.
-
Updated
Jun 1, 2023 - C
This is a demo code is to provide support for the Curiosity High Pin Count (HPC) development board using the PIC18F47Q43.
This is a demo code is to provide support for the Curiosity High Pin Count (HPC) development board using the PIC18F47Q10.
Example code for using AVR64DD32 with neopixels
Create an Agricultural IoT Sensor Node with AVR DD and RN2xx3 LoRa Module
This example uses the MCC Melody Library to show how to configure the device with a software delay and blink the LED on the AVR128DB48 Curiosity Nano development kit.
This repository contains the project that comes preloaded on the PIC16F13145 Curiosity Nano board. It contains a simple state machine demo of the Configurable Logic Block (CLB).
This code example demonstrates usage of various peripherals of PIC microcontroller. Some compatible PIC16F171xx and PIC16F181xx family of MCUs are: PIC16F17146, PIC16F17125, PIC16F18146, PIC16F18125
These labs provide support for the Curiosity High Pin Count (HPC) development board using the PIC18F46Q71.
The AVR128DA48 features one 12-bit differential ADC. This example demonstrates the RMS voltage measurement of AC supply using differential ADC.
This example uses the MCC Melody Library to show how to use the Analog to Digital Converter (ADC) to read a signal then send it out with the Universal Synchronous and Asynchronous Receiver-Transmitter (USART). Works with MPLABX or MPLAB XPRESS IDE.
PIC18F47Q10 PWM Basic Configuration - MCC code example
This example demonstrates some of the PIC18-Q40's key features such as the 16-bit PWM, the UART module, the ADCC and the integrated Temperature Indicator module. This firmware is pre-loaded onto the Q40 Curiosity Nano development boards.
This MCC based MPLAB X IDE example shows how to interface an electret microphone with a microcontroller (MCU) using the Analog Signal Conditioning (OPAMP). In addition to the microphone, only one resistor and one capacitor are required.
This code example demonstrates the different features of I3C Target module such as Hot-Join (HJ), Private Transaction, In-Band Interrupt (IBI), Reset and Common Code Command (CCC). Other compatible PIC18-Q20 family of MCUs are: PIC18F06Q20
PIC16F18446 Sensor Board Metal Detection example
This example demonstrates the different OPA peripheral modes of operation. This firmware is pre-loaded onto the Q41 Curiosity Nano development boards.
This MPLAB X Melody code example shows how to make an LED blink using the Configurable Custom Logic (CCL) found in the AVR® DB. The CCL is configured as a toggling J-K flip-flop. The toggling is a result of a timer event.
This example demonstrates using an HLVD module to quickly detect when the supply voltage of the microcontroller has decreased below the specified trip point or increased above the specified trip point
Add a description, image, and links to the melody topic page so that developers can more easily learn about it.
To associate your repository with the melody topic, visit your repo's landing page and select "manage topics."