-
Notifications
You must be signed in to change notification settings - Fork 33
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
GTPv2 Create Session Response with "Cause: No resources available". #324
Comments
Hi @gantonie, If you can, please provide your full configuration. It would be also helpful if you will run Regards, |
First observation, log level is not really at debug. You need to add a
|
Here is the ergw output with debug log level
|
The sample config from the walk-through is outdated and not even close to working. Here is a adjusted version, UNTESTED:
|
I tried this config file but I got this error
|
right, I made a mistake in the pool in the ip_pools config, it should be
|
It seems to work fine now. Thank you very much for your time. Regards, |
Closed due that the configuration issue is resolved. |
Hi,
I am trying to reproduce your SAE-GW walkthrough (https://github.com/travelping/ergw/blob/master/doc/walkthrough-saegw.md), however I am currently facing a problem.
When I am trying to connect a UE to the network, the MME send a GTPv2 Create Session Request and erGW answer with a GTPv2 Create Session Response with "Cause: No resources available".
I installed erGW and VPP without any problem and they are both working, PFCP messages are sent between the UP and the CP.
My configuration is the following: I use the MME and HSS from Open5GS which are working fine and are installed on my computer. The eNodeB and UE are simulated with srsLTE and are also working.
erGW and VPP are installed inside a docker container with 3 network interfaces as it is advised in the walkthrough.
I use erGW version 2.8.5 and this VPP version: https://github.com/travelping/upg-vpp/
Also, do you have an updated version of the init.conf of VPP with the UPG plugin for this walkthrough?
Thank you in advance
The text was updated successfully, but these errors were encountered: