PLC MODULE HARDWARE PROBLEM

[Mustafa19981903]

I am using the tl-pa4010p module as PLC and I could not establish a connection with the vehicle. Can you recommend a plc module that can work with the software?

[Mustafa19981903]

How did you set these values in the software file with the extension pyplchomeplug.py? I will be very pleased if you give me information.

[Mustafa19981903]

[pamukcu09]

I am using the tl-pa4010p module as PLC and I could not establish a connection with the vehicle. Can you recommend a plc module that can work with the software?

@uhi22

[uhi22]

The tl-pa4010p which I used are working. To find out what happens it would be helpful that you add a description what you did, what you expect and what you observe. In best case together with an ethernet log, which you can record using wireshark or tcpdump.

[pamukcu09]

We just wondering, if we use different plc module do we have to change this parameters? @uhi22

[uhi22]

These values come from the "official" qualcom QCA tool on GitHub, and from the public homeplug documents. If you use plc hardware from other than qualcom/atheros maybe they have different requirements.

[pamukcu09]

Thank you so much, we are appreciate for your help