The automated release is failing 🚨 #223

agrohs · 2019-12-20T19:32:33Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

The text was updated successfully, but these errors were encountered:

agrohs · 2019-12-21T06:51:10Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2019-12-23T19:28:52Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2019-12-28T13:55:19Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-02T19:29:27Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-06T19:30:09Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-07T06:02:23Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-07T19:31:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-08T19:32:59Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-10T19:31:25Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-13T19:31:18Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-14T19:32:48Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-15T19:33:57Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-16T21:31:07Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-17T20:18:42Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-20T20:59:52Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-21T19:28:47Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-23T19:31:39Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-01-24T19:28:39Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-04T19:33:27Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-05T19:27:54Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-06T19:27:50Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-07T19:33:41Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-10T21:53:27Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-11T19:56:50Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-12T21:19:32Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-13T20:38:04Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-14T19:27:21Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-17T19:42:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2020-02-18T21:19:44Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-07-25T20:09:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-07-30T22:14:44Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-01T19:19:29Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-02T22:16:54Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-05T20:01:11Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-06T23:22:18Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-07T19:51:18Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-08T21:38:21Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-09T20:16:05Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-12T19:10:15Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-13T18:54:31Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-14T20:10:44Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-15T22:43:46Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-16T20:13:22Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-19T21:32:57Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-20T22:54:14Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-21T20:19:15Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-22T21:58:03Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-23T20:09:02Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-26T19:25:22Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-27T22:49:49Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-28T21:31:22Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-29T22:53:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-08-30T19:42:27Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-09-03T20:16:51Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-09-04T19:01:09Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-09-05T19:05:01Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-09-06T20:07:49Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-10-28T13:20:28Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs · 2024-11-06T21:57:46Z

🚨 The automated release from the `master` branch failed. 🚨

I recommend you give this issue a high priority, so other packages depending on you could benefit from your bug fixes and new features.

You can find below the list of errors reported by semantic-release. Each one of them has to be resolved in order to automatically publish your package. I’m sure you can resolve this 💪.

Errors are usually caused by a misconfiguration or an authentication problem. With each error reported below you will find explanation and guidance to help you to resolve it.

Once all the errors are resolved, semantic-release will release your package the next time you push a commit to the master branch. You can also manually restart the failed CI job that runs semantic-release.

If you are not sure how to resolve this, here is some links that can help you:

If those don’t help, or if this issue is reporting something you think isn’t right, you can always ask the humans behind semantic-release.

Invalid npm token.

The npm token configured in the NPM_TOKEN environment variable must be a valid token allowing to publish to the registry https://registry.npmjs.org/.

If you are using Two-Factor Authentication, make configure the auth-only level is supported. semantic-release cannot publish with the default auth-and-writes level.

Please make sure to set the NPM_TOKEN environment variable in your CI with the exact value of the npm token.

Good luck with your project ✨

Your semantic-release bot 📦🚀

agrohs added the semantic-release label Dec 20, 2019

The automated release is failing 🚨 #223

The automated release is failing 🚨 #223

Comments

agrohs commented Dec 20, 2019

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Dec 21, 2019

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Dec 23, 2019

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Dec 28, 2019

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 2, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 6, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 7, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 7, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 8, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 10, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 13, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 14, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 15, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 16, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 17, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 20, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 21, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 23, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Jan 24, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 4, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 5, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 6, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 7, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 10, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 11, 2020

🚨 The automated release from the master branch failed. 🚨

Invalid npm token.

agrohs commented Feb 12, 2020

🚨 The automated release from the master branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨

🚨 The automated release from the `master` branch failed. 🚨