Hawk Bumper Pull Slant Load Front Ramp
24" door in middle of slant bulkhead opens into horse area. with padding on horse side. lockable.
blanket bars high on horse side of bulkhead wall both sides of door (see photo: https://drive.google.com/file/d/1-bdXAl0MTRBcH0bpLaJCDe4cwESfwSfT/view?usp=sharing )
Camper vent in dressing room ceiling.
Window in dressing room door
NO Windows in front v-nose walls of dressing room
NO carpet in dressing room or back tack area. leave dressing room floor bare.
add two blanket poles for saddle rack.
confirm there is also a post for the saddle racks in the dressing room?
Tall Back Doors with w/ Dual Cam Latch. (no rear ramp)
Step up, confirm it's only about 13"
collapsible / fold down rear tack
Sliding Window w/ Bars in ditch side rear door. solid drivers side door for tack.
Goodyear Endurance trailer tires ST225/75R15 (8-Ply)
Aluminum wheels (including spare).
Mount spare on front v-nose ditch side.
interior and exterior lights as recommended
Airflow tubular shoulder area on divider
Telescoping divider (not double swing) so it will fit inside against the rear tack. See video https://youtu.be/qXcAdjfLATM?t=90
weld loops on bottom of divider in case I want to hang a rubber mat from it later.
Triangle feed bags for both stalls
Front ramp 39" for first slant stall
Breast bar across the front ramp. (does it need two levels?)
Inside tie rings on ditch side wall in both stalls in case I do load one horse reverse with or without the divider
Drop-downs with cages on both ditch-side windows and second stall window drivers side.
Investigate having a drop-down in the door above the ramp. Will the handles for the paddle latches interfere?
Confirm that there is a structural vertical stud in the ditch side wall up high between the windows so that I can bolt through it to attach a Hi-Tie.
pre-wire for 12v power for cameras top middle back outside for backup camera, rear ditch-side corner in horse area. Wire into running lights NOT to a separate switch. Cameras are on when trailer is plugged into truck and running lights are on.
Add one fan horse area front ditch side up high
battery that runs lights and fans while not connected to truck. (will it charge off of the truck? either way is fine, I'll add a solar panel to keep it charged.)
batteries and fuse box on floor along front drivers side floor of V-nose (as in diagram of the red trailer)
wood floor with rubber mats in horse area
WD brackets on tongue -- which brand? Reese? Equalizer?
Elite, white, trim color dark blue similar to Ford
Make Sure
which WD system? - Reese
what axles?