You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
{{ message }}
This repository has been archived by the owner on Oct 2, 2019. It is now read-only.
I Have 2 Yi Home 1080p cameras where I applied the hack
But when I turn off the light, I no longer hear the 'clic' for ir led toggle
I removed the sd card and the ir leds are working again
is there something in config to do to retrieve night vision ?
Starting to log...
[INIT] Your firmware version is:
2.0.0.1A_201612051401
[INIT] Killing original init.sh script.
[good] busybox 1.16.1 is in the system.
[good] rtsp2301 is in the system.
[good] rtsp2301_watch.sh is in the system.
Check for wifi configuration file...
/tmp/wpa_supplicant.conf /tmp/sd/test/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Do network configuration (DHCP)
Done
Configuration is:
wlan0 Link encap:Ethernet HWaddr 0C:8C:24:00:18:F2
inet addr:192.168.20.152 Bcast:192.168.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1200 Metric:1
RX packets:186 errors:0 dropped:14 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:40545 (39.5 KiB) TX bytes:3340 (3.2 KiB)
Hi,
I Have 2 Yi Home 1080p cameras where I applied the hack
But when I turn off the light, I no longer hear the 'clic' for ir led toggle
I removed the sd card and the ir leds are working again
is there something in config to do to retrieve night vision ?
Starting to log...
[INIT] Your firmware version is:
2.0.0.1A_201612051401
[INIT] Killing original init.sh script.
[good] busybox 1.16.1 is in the system.
[good] rtsp2301 is in the system.
[good] rtsp2301_watch.sh is in the system.
Check for wifi configuration file...
/tmp/wpa_supplicant.conf /tmp/sd/test/wpa_supplicant.conf
Start wifi configuration...
Status for wifi configuration=0 (0 is ok)
Do network configuration (DHCP)
Done
Configuration is:
wlan0 Link encap:Ethernet HWaddr 0C:8C:24:00:18:F2
inet addr:192.168.20.152 Bcast:192.168.20.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1200 Metric:1
RX packets:186 errors:0 dropped:14 overruns:0 frame:0
TX packets:25 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:40545 (39.5 KiB) TX bytes:3340 (3.2 KiB)
Get time from a NTP server...
Previous datetime is Thu Jan 1 01:00:19 CET 1970
Done
New datetime is Thu Jan 1 01:00:19 CET 1970
Starting telnet server...
Starting FTP server...
Starting RTSP server...
Processes after startup :
PID USER TIME COMMAND
1 root 0:00 init
2 root 0:00 [kthreadd]
3 root 0:00 [ksoftirqd/0]
4 root 0:00 [kworker/0:0]
5 root 0:00 [kworker/u:0]
6 root 0:00 [khelper]
7 root 0:00 [kworker/u:1]
88 root 0:00 [sync_supers]
90 root 0:00 [bdi-default]
91 root 0:00 [kintegrityd]
93 root 0:00 [kblockd]
103 root 0:00 [khubd]
105 root 0:00 [kusbotg]
199 root 0:00 [kswapd0]
251 root 0:00 [fsnotify_mark]
264 root 0:00 [crypto]
316 root 0:00 [romblock0]
319 root 0:00 [mtdblock0]
324 root 0:00 [romblock1]
327 root 0:00 [mtdblock1]
332 root 0:00 [romblock2]
335 root 0:00 [mtdblock2]
340 root 0:00 [romblock3]
343 root 0:00 [mtdblock3]
348 root 0:00 [romblock4]
351 root 0:00 [mtdblock4]
356 root 0:00 [romblock5]
359 root 0:00 [mtdblock5]
364 root 0:00 [romblock6]
367 root 0:00 [mtdblock6]
372 root 0:00 [romblock7]
375 root 0:00 [mtdblock7]
398 root 0:00 [cfinteractive]
403 root 0:00 [kworker/0:1]
404 root 0:00 [kworker/u:2]
412 root 0:00 [deferwq]
413 root 0:00 [jffs2_gcd_mtd4]
427 root 0:00 udevd --daemon
429 root 0:00 udevd --daemon
431 root 0:00 udevd --daemon
448 root 0:00 [kworker/u:3]
510 root 0:00 [mmcqd/1]
665 root 0:00 [jffs2_gcd_mtd5]
667 root 0:00 -sh
691 root 0:00 [flush-31:2]
692 root 0:00 [flush-179:0]
701 root 0:00 {exe} ash /home/app/script/factory_test.sh
703 root 0:00 {factory_test.sh} /bin/sh /tmp/sd/test/factory_test.sh
705 root 0:00 [flush-mtd-unmap]
782 root 0:00 [RtmpTimerTask]
783 root 0:00 [RtmpMlmeTask]
784 root 0:00 [RtmpCmdQTask]
785 root 0:00 [RtmpWscTask]
794 root 0:00 /home/base/tools/wpa_supplicant -c/tmp/wpa_supplicant.conf -g/var/run/wpa_supplicant-global -iwlan0 -B
831 root 0:00 /sbin/udhcpc -i wlan0 -b -s /home/app/script/default.script
852 root 0:00 /home/app/localbin/busybox ntpd -q -p 0.nl.pool.ntp.org
1023 root 0:00 [hidog]
1027 root 0:00 /home/app/localbin/busybox telnetd
1030 root 0:00 /home/app/localbin/busybox tcpsvd -vE 0.0.0.0 21 /home/app/localbin/busybox ftpd -w /
1032 root 0:00 {rtsp2301_watch.} /bin/sh /home/app/localbin/rtsp2301_watch.sh
1036 root 0:00 ps
1038 root 0:00 /home/app/localbin/rtsp2301
1040 root 0:00 sleep 30
Storage status :
Filesystem 1024-blocks Used Available Use% Mounted on
/dev/root 1280 1084 196 85% /
tmpfs 15380 4 15376 0% /dev
/dev/mtdblock5 12992 8908 4084 69% /home
tmpfs 16384 28 16356 0% /tmp
/dev/mmcblk0p1 15543280 729152 14814128 5% /tmp/sd
The text was updated successfully, but these errors were encountered: