Skip to content

Latest commit

 

History

History
434 lines (306 loc) · 12.8 KB

INSTALL.md

File metadata and controls

434 lines (306 loc) · 12.8 KB

** This file is adapted from libcurl and not yet fully rewritten for c-ares! **

                          ___       __ _ _ __ ___  ___
                         / __| ___ / _` | '__/ _ \/ __|
                        | (_  |___| (_| | | |  __/\__ \
                         \___|     \__,_|_|  \___||___/

                                How To Compile

Installing Binary Packages

Lots of people download binary distributions of c-ares. This document does not describe how to install c-ares using such a binary package. This document describes how to compile, build and install c-ares from source code.

Building from Git

If you get your code off a Git repository rather than an official release tarball, see the GIT-INFO file in the root directory for specific instructions on how to proceed.

In particular, if not using CMake you will need to run ./buildconf (Unix) or buildconf.bat (Windows) to generate build files, and for the former you will need a local installation of Autotools. If using CMake the steps are the same for both Git and official release tarballs.

AutoTools Build

General Information, works on most Unix Platforms (Linux, FreeBSD, etc)

A normal Unix installation is made in three or four steps (after you've unpacked the source archive):

./configure
make
make install

You probably need to be root when doing the last command.

If you have checked out the sources from the git repository, read the GIT-INFO on how to proceed.

Get a full listing of all available configure options by invoking it like:

./configure --help

If you want to install c-ares in a different file hierarchy than /usr/local, you need to specify that already when running configure:

./configure --prefix=/path/to/c-ares/tree

If you happen to have write permission in that directory, you can do make install without being root. An example of this would be to make a local install in your own home directory:

./configure --prefix=$HOME
make
make install

More Options

To force configure to use the standard cc compiler if both cc and gcc are present, run configure like

CC=cc ./configure
# or
env CC=cc ./configure

To force a static library compile, disable the shared library creation by running configure like:

./configure --disable-shared

If you're a c-ares developer and use gcc, you might want to enable more debug options with the --enable-debug option.

Special Cases

Some versions of uClibc require configuring with CPPFLAGS=-D_GNU_SOURCE=1 to get correct large file support.

The Open Watcom C compiler on Linux requires configuring with the variables:

./configure CC=owcc AR="$WATCOM/binl/wlib" AR_FLAGS=-q \
    RANLIB=/bin/true STRIP="$WATCOM/binl/wstrip" CFLAGS=-Wextra

CROSS COMPILE

(This section was graciously brought to us by Jim Duey, with additions by Dan Fandrich)

Download and unpack the c-ares package.

cd to the new directory. (e.g. cd c-ares-1.7.6)

Set environment variables to point to the cross-compile toolchain and call configure with any options you need. Be sure and specify the --host and --build parameters at configuration time. The following script is an example of cross-compiling for the IBM 405GP PowerPC processor using the toolchain from MonteVista for Hardhat Linux.

#! /bin/sh

export PATH=$PATH:/opt/hardhat/devkit/ppc/405/bin
export CPPFLAGS="-I/opt/hardhat/devkit/ppc/405/target/usr/include"
export AR=ppc_405-ar
export AS=ppc_405-as
export LD=ppc_405-ld
export RANLIB=ppc_405-ranlib
export CC=ppc_405-gcc
export NM=ppc_405-nm

./configure --target=powerpc-hardhat-linux \
     --host=powerpc-hardhat-linux \
     --build=i586-pc-linux-gnu \
     --prefix=/opt/hardhat/devkit/ppc/405/target/usr/local \
     --exec-prefix=/usr/local

You may also need to provide a parameter like --with-random=/dev/urandom to configure as it cannot detect the presence of a random number generating device for a target system. The --prefix parameter specifies where c-ares will be installed. If configure completes successfully, do make and make install as usual.

In some cases, you may be able to simplify the above commands to as little as:

./configure --host=ARCH-OS

Cygwin (Windows)

Almost identical to the unix installation. Run the configure script in the c-ares root with sh configure. Make sure you have the sh executable in /bin/ or you'll see the configure fail toward the end.

Run make

QNX

(This section was graciously brought to us by David Bentham)

As QNX is targeted for resource constrained environments, the QNX headers set conservative limits. This includes the FD_SETSIZE macro, set by default to 32. Socket descriptors returned within the c-ares library may exceed this, resulting in memory faults/SIGSEGV crashes when passed into select(..) calls using fd_set macros.

A good all-round solution to this is to override the default when building c-ares, by overriding CFLAGS during configure, example:

# configure CFLAGS='-DFD_SETSIZE=64 -g -O2'

RISC OS

The library can be cross-compiled using gccsdk as follows:

CC=riscos-gcc AR=riscos-ar RANLIB='riscos-ar -s' ./configure \
     --host=arm-riscos-aof --without-random --disable-shared
make

where riscos-gcc and riscos-ar are links to the gccsdk tools. You can then link your program with c-ares/lib/.libs/libcares.a.

Android

Method using a configure cross-compile (tested with Android NDK r7b):

  • prepare the toolchain of the Android NDK for standalone use; this can be done by invoking the script:

    ./tools/make-standalone-toolchain.sh
    

    which creates a usual cross-compile toolchain. Lets assume that you put this toolchain below /opt then invoke configure with something like:

        export PATH=/opt/arm-linux-androideabi-4.4.3/bin:$PATH
       ./configure --host=arm-linux-androideabi [more configure options]
        make
    
  • if you want to compile directly from our GIT repo you might run into this issue with older automake stuff:

        checking host system type...
        Invalid configuration `arm-linux-androideabi':
        system `androideabi' not recognized
        configure: error: /bin/sh ./config.sub arm-linux-androideabi failed
    

    this issue can be fixed with using more recent versions of config.sub and config.guess which can be obtained here: http://git.savannah.gnu.org/gitweb/?p=config.git;a=tree you need to replace your system-own versions which usually can be found in your automake folder: find /usr -name config.sub

CMake builds

Current releases of c-ares introduce a CMake v3+ build system that has been tested on most platforms including Windows, Linux, FreeBSD, MacOS, AIX and Solaris.

In the most basic form, building with CMake might look like:

cd /path/to/cmake/source
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr/local/cares ..
make
sudo make install

Options

Options to CMake are passed on the command line using "-D${OPTION}=${VALUE}". The values defined are all boolean and take values like On, Off, True, False.

  • CARES_STATIC - Build the static library (off by default)
  • CARES_SHARED - Build the shared library (on by default)
  • CARES_INSTALL - Hook in installation, useful to disable if chain building
  • CARES_STATIC_PIC - Build the static library as position-independent (off by default)

Ninja

Ninja is the next-generation build system meant for generators like CMake that heavily parallize builds. Its use is very similar to the normal build:

cd /path/to/cmake/source
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=/usr/local/cares -G "Ninja" ..
ninja
sudo ninja install

Windows MSVC Command Line

cd \path\to\cmake\source
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=C:\cares -G "NMake Makefiles" ..
nmake
nmake install

Windows MinGW-w64 Command Line via MSYS

cd \path\to\cmake\source
mkdir build
cd build
cmake -DCMAKE_BUILD_TYPE=Release -DCMAKE_INSTALL_PREFIX=C:\cares -G "MSYS Makefiles" ..
make
make install

Platform-specific build systems

Win32

Building Windows DLLs and C run-time (CRT) linkage issues

As a general rule, building a DLL with static CRT linkage is highly discouraged, and intermixing CRTs in the same app is something to avoid at any cost.

Reading and comprehension of the following Microsoft Learn article is a must for any Windows developer. Especially important is full understanding if you are not going to follow the advice given above.

If your app is misbehaving in some strange way, or it is suffering from memory corruption, before asking for further help, please try first to rebuild every single library your app uses as well as your app using the debug multithreaded dynamic C runtime.

MingW32

Make sure that MinGW32's bin dir is in the search path, for example:

set PATH=c:\mingw32\bin;%PATH%

then run 'make -f Makefile.m32' in the root dir.

MSVC 6 caveats

If you use MSVC 6 it is required that you use the February 2003 edition PSDK: http://www.microsoft.com/msdownload/platformsdk/sdkupdate/psdk-full.htm

MSVC from command line

Run the vcvars32.bat file to get a proper environment. The vcvars32.bat file is part of the Microsoft development environment and you may find it in C:\Program Files\Microsoft Visual Studio\vc98\bin provided that you installed Visual C/C++ 6 in the default directory.

Further details in README.msvc

Important static c-ares usage note

When building an application that uses the static c-ares library, you must add -DCARES_STATICLIB to your CFLAGS. Otherwise the linker will look for dynamic import symbols.

IBM OS/2

Building under OS/2 is not much different from building under unix. You need:

  • emx 0.9d
  • GNU make
  • GNU patch
  • ksh
  • GNU bison
  • GNU file utilities
  • GNU sed
  • autoconf 2.13

If during the linking you get an error about _errno being an undefined symbol referenced from the text segment, you need to add -D__ST_MT_ERRNO__ in your definitions.

If you're getting huge binaries, probably your makefiles have the -g in CFLAGS.

NetWare

To compile libcares.a / libcares.lib you need:

Set a search path to your compiler, linker and tools; on Linux make sure that the var OSTYPE contains the string 'linux'; set the var NDKBASE to point to the base of your Novell NDK; and then type make -f Makefile.netware from the top source directory;

VCPKG

You can build and install c-ares using vcpkg dependency manager:

    git clone https://github.com/Microsoft/vcpkg.git
    cd vcpkg
    ./bootstrap-vcpkg.sh
    ./vcpkg integrate install
    ./vcpkg install c-ares

The c-ares port in vcpkg is kept up to date by Microsoft team members and community contributors. If the version is out of date, please create an issue or pull request on the vcpkg repository.

WATCOM

To build c-ares with OpenWatcom, you need to have at least version 1.9 of OpenWatcom. You can get the latest version from http://openwatcom.org/ftp/install/. Install the version that corresponds to your current host platform.

After installing OpenWatcom, open a new command prompt and execute the following commands:

  cd \path\to\cmake\source
  buildconf.bat
  wmake -u -f Makefile.Watcom

After running wmake, you should get adig.exe, ahost.exe, and the static and dynamic versions of libcares.

PORTS

This is a probably incomplete list of known hardware and operating systems that c-ares has been compiled for. If you know a system c-ares compiles and runs on, that isn't listed, please let us know!

 - Alpha Tru64 v5.0 5.1
 - ARM Android 1.5, 2.1, 2.3
 - MIPS IRIX 6.2, 6.5
 - Power AIX 3.2.5, 4.2, 4.3.1, 4.3.2, 5.1, 5.2
 - i386 Linux 1.3, 2.0, 2.2, 2.3, 2.4, 2.6
 - i386 Novell NetWare
 - i386 Windows 95, 98, ME, NT, 2000, XP, 2003
 - x86_64 Linux

Useful URLs