[Strips Drip 700] Some configurations have incorrect size and some incorrect name

[dparyani]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

What is happening?

1. Configuration changes for [NodeId-112-0-7] and [NodeId-112-0-8] are rejected by Strips Drip 700. On closer investigation it was found that wrong configuration size is hard-coded in the JSON file.
   https://github.com/zwave-js/node-zwave-js/blob/master/packages/config/config/devices/0x019a/11_04_21_22_28.json

2. Reviewing the above mentioned file showed further incorrect discrepancies. For e.g. [NodeId-112-0-4] has incorrect configuration name.

What did you expect to happen instead?
Sensative expected for these configurations to reflect and work as expected and as mentioned in the device manual.

Steps to reproduce the behavior:

1. Pair Strips Drip 700 with Home Assistant
2. Enable configuration parameter [NodeId-112-0-6] Temperature Alarms.
3. Change and queue configuration changes for parameters [NodeId-112-0-7] and [NodeId-112-0-8].
4. Manual Wake-Up Strips.
5. Try to change the environment temperature around Strips Drip 700. e.g. Use a hair dryer to increase the temperature or an ice or pre-freezed package to lower the temperature.
6. Check the temperature levels at which the alarms trigger. They will not be similar to what the values were being set in step 3.
7. Alternatively, one can poll for parameters [NodeId-112-0-7] and [NodeId-112-0-8]

Anything else we should know?
Sensative will fix this and create a pull request

Software versions

Driver (node-zwave-js): ...

Z-Wave JS UI: 2.2.3

Home Assistant Z-Wave Core: 2023.10.5

Home Assistant OS: 11.0

Home Assistant Z-Wave JS Addon: ...

ioBroker.zwave2 Adapter: ...

If you are using something non-standard, tell us here: ...

Device information

Manufacturer: Sensative (0x019A)
Model name: "11 04 021/022/028"

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

No response

[zwave-js-bot]

👋 Hey @dparyani!

Thanks for opening an issue! It doesn't look like you provided a logfile though. While not strictly necessary for every issue, having a driver log on loglevel debug is required to diagnose most issues.

Please consider uploading a logfile that captures your problem. As a reminder, here's how to create one:

• Z-Wave JS UI
• Home Assistant Z-Wave Integration
• ioBroker.zwave2 Adapter

[dparyani]

I will see if I can generate a debug log. Alternatively since we know where the problem is and we can already create a pull request.

[AlCalzone]

No need for a log if the config file is wrong.

[AlCalzone]

Escalated to an issue: #6509