This repository contains the XBPS source packages collection to build binary packages for the Void Linux distribution.
The included xbps-src
script will fetch and compile the sources, and install its
files into a fake destdir
to generate XBPS binary packages that can be installed
or queried through the xbps-install(1)
and xbps-query(1)
utilities, respectively.
See Contributing for a general overview of how to contribute and the Manual for details of how to create source packages.
- Requirements
- Quick start
- chroot methods
- Install the bootstrap packages
- Configuration
- Directory hierarchy
- Building packages
- Package build options
- Sharing and signing your local repositories
- Rebuilding and overwriting existing local packages
- Enabling distcc for distributed compilation
- Distfiles mirrors
- Cross compiling packages for a target architecture
- Using xbps-src in a foreign Linux distribution
- Remaking the masterdir
- Keeping your masterdir uptodate
- Building 32bit packages on x86_64
- Building packages natively for the musl C library
- Building void base-system from scratch
- GNU bash
- xbps >= 0.56
- git(1) - unless configured to not, see etc/defaults.conf
- common POSIX utilities included by default in almost all UNIX systems
- curl(1) - required by
xbps-src update-check
For bootstrapping additionally:
- flock(1) - util-linux
- bsdtar or GNU tar (in that order of preference)
- install(1) - GNU coreutils
- objcopy(1), objdump(1), strip(1): binutils
xbps-src
requires a utility to chroot and bind mount existing directories
into a masterdir
that is used as its main chroot
directory. xbps-src
supports
multiple utilities to accomplish this task.
NOTE:
xbps-src
does not allow building as root anymore. Use one of the chroot methods.
Clone the void-packages
git repository and install the bootstrap packages:
$ git clone https://github.com/void-linux/void-packages.git
$ cd void-packages
$ ./xbps-src binary-bootstrap
Build a package by specifying the pkg
target and the package name:
$ ./xbps-src pkg <package_name>
Use ./xbps-src -h
to list all available targets and options.
To build packages marked as 'restricted', modify etc/conf
:
$ echo XBPS_ALLOW_RESTRICTED=yes >> etc/conf
Once built, the package will be available in hostdir/binpkgs
or an appropriate subdirectory (e.g. hostdir/binpkgs/nonfree
). To install the package:
# xbps-install --repository hostdir/binpkgs <package_name>
Alternatively, packages can be installed with the xi
utility, from the xtools
package. xi
takes the repository of the current working directory into account.
# xi <package_name>
XBPS utility that uses user_namespaces(7)
(part of xbps, default without -t
flag).
This utility requires these Linux kernel options:
- CONFIG_NAMESPACES
- CONFIG_IPC_NS
- CONFIG_UTS_NS
- CONFIG_USER_NS
This is the default method, and if your system does not support any of the required kernel
options it will fail with EINVAL (Invalid argument)
.
XBPS utility that uses namespaces
and must be setgid
(part of xbps).
NOTE: This is the only method that implements functionality of
xbps-src -t
, therefore the flag ignores the choice made in configuration files and enablesxbps-uchroot
.
This utility requires these Linux kernel options:
- CONFIG_NAMESPACES
- CONFIG_IPC_NS
- CONFIG_PID_NS
- CONFIG_UTS_NS
Your user must be added to a special group to be able to use xbps-uchroot(1)
and the
executable must be setgid
:
# chown root:<group> xbps-uchroot
# chmod 4750 xbps-uchroot
# usermod -a -G <group> <user>
NOTE: by default in void you shouldn't do this manually, your user must be a member of the
xbuilder
group.
To enable it:
$ cd void-packages
$ echo XBPS_CHROOT_CMD=uchroot >> etc/conf
If for some reason it's erroring out as ERROR clone (Operation not permitted)
, check that
your user is a member of the required group
and that xbps-uchroot(1)
utility has the
proper permissions and owner/group as explained above.
bubblewrap, sandboxing tool for unprivileged users that uses user namespaces or setuid. See https://github.com/containers/bubblewrap.
Destroys host system it runs on. Only useful for one-shot containers, i.e docker (used with CI).
There is a set of packages that makes up the initial build container, called the bootstrap
.
These packages are installed into the masterdir
in order to create the container.
The primary and recommended way to set up this container is using the binary-bootstrap
command. This will use pre-existing binary packages, either from remote xbps
repositories
or from your local repository.
There is also the bootstrap
command, which will build all necessary bootstrap
packages from
scratch. This is usually not recommended, since those packages are built using your host system's
toolchain and are neither fully featured nor reproducible (your host system may influence the
build) and thus should only be used as a stage 0 for bootstrapping new Void systems.
If you still choose to use bootstrap
, use the resulting stage 0 container to rebuild all
bootstrap
packages again, then use binary-bootstrap
(stage 1) and rebuild the bootstrap
packages once more (to gain stage 2, and then use binary-bootstrap
again). Once you've done
that, you will have a bootstrap
set equivalent to using binary-bootstrap
in the first place.
Also keep in mind that a full source bootstrap
is time consuming and will require having an
assortment of utilities installed in your host system, such as binutils
, gcc
, perl
,
texinfo
and others.
The etc/defaults.conf
file contains the possible settings that can be overridden
through the etc/conf
configuration file for the xbps-src
utility; if that file
does not exist, will try to read configuration settings from $XDG_CONFIG_HOME/xbps-src.conf
, ~/.config/xbps-src.conf
, ~/.xbps-src.conf
.
If you want to customize default CFLAGS
, CXXFLAGS
and LDFLAGS
, don't override
those defined in etc/defaults.conf
, set them on etc/conf
instead i.e:
$ echo 'XBPS_CFLAGS="your flags here"' >> etc/conf
$ echo 'XBPS_LDFLAGS="your flags here"' >> etc/conf
Native and cross compiler/linker flags are set per architecture in common/build-profiles
and common/cross-profiles
respectively. Ideally those settings are good enough by default,
and there's no need to set your own unless you know what you are doing.
The etc/defaults.virtual
file contains the default replacements for virtual packages,
used as dependencies in the source packages tree.
If you want to customize those replacements, copy etc/defaults.virtual
to etc/virtual
and edit it accordingly to your needs.
The following directory hierarchy is used with a default configuration file:
/void-packages
|- common
|- etc
|- srcpkgs
| |- xbps
| |- template
|
|- hostdir
| |- binpkgs ...
| |- ccache ...
| |- distcc-<arch> ...
| |- repocache ...
| |- sources ...
|
|- masterdir
| |- builddir -> ...
| |- destdir -> ...
| |- host -> bind mounted from <hostdir>
| |- void-packages -> bind mounted from <void-packages>
The description of these directories is as follows:
masterdir
: master directory to be used as rootfs to build/install packages.builddir
: to unpack package source tarballs and where packages are built.destdir
: to install packages, aka fake destdir.hostdir/ccache
: to store ccache data if theXBPS_CCACHE
option is enabled.hostdir/distcc-<arch>
: to store distcc data if theXBPS_DISTCC
option is enabled.hostdir/repocache
: to store binary packages from remote repositories.hostdir/sources
: to store package sources.hostdir/binpkgs
: local repository to store generated binary packages.
The simplest form of building package is accomplished by running the pkg
target in xbps-src
:
$ cd void-packages
$ ./xbps-src pkg <pkgname>
When the package and its required dependencies are built, the binary packages will be created
and registered in the default local repository at hostdir/binpkgs
; the path to this local repository can be added to
any xbps configuration file (see xbps.d(5)) or by explicitly appending them via cmdline, i.e:
$ xbps-install --repository=hostdir/binpkgs ...
$ xbps-query --repository=hostdir/binpkgs ...
By default xbps-src will try to resolve package dependencies in this order:
- If a dependency exists in the local repository, use it (
hostdir/binpkgs
). - If a dependency exists in a remote repository, use it.
- If a dependency exists in a source package, use it.
It is possible to avoid using remote repositories completely by using the -N
flag.
The default local repository may contain multiple sub-repositories:
debug
,multilib
, etc.
The supported build options for a source package can be shown with xbps-src show-options
:
$ ./xbps-src show-options foo
Build options can be enabled with the -o
flag of xbps-src
:
$ ./xbps-src -o option,option1 pkg foo
Build options can be disabled by prefixing them with ~
:
$ ./xbps-src -o ~option,~option1 pkg foo
Both ways can be used together to enable and/or disable multiple options
at the same time with xbps-src
:
$ ./xbps-src -o option,~option1,~option2 pkg foo
The build options can also be shown for binary packages via xbps-query(1)
:
$ xbps-query -R --property=build-options foo
NOTE: if you build a package with a custom option, and that package is available in an official void repository, an update will ignore those options. Put that package on
hold
mode viaxbps-pkgdb(1)
, i.exbps-pkgdb -m hold foo
to ignore updates withxbps-install -u
. Once the package is onhold
, the only way to update it is by declaring it explicitly:xbps-install -u foo
.
Permanent global package build options can be set via XBPS_PKG_OPTIONS
variable in the
etc/conf
configuration file. Per package build options can be set via
XBPS_PKG_OPTIONS_<pkgname>
.
NOTE: if
pkgname
containsdashes
, those should be replaced byunderscores
i.eXBPS_PKG_OPTIONS_xorg_server=opt
.
The list of supported package build options and its description is defined in the
common/options.description
file or in the template
file.
To share a local repository remotely it's mandatory to sign it and the binary packages
stored on it. This is accomplished with the xbps-rindex(1)
utility.
First a RSA key must be created with openssl(1)
or ssh-keygen(1)
:
$ openssl genrsa -des3 -out privkey.pem 4096
or
$ ssh-keygen -t rsa -b 4096 -m PEM -f privkey.pem
Only RSA keys in PEM format are currently accepted by xbps.
Once the RSA private key is ready you can use it to initialize the repository metadata:
$ xbps-rindex --sign --signedby "I'm Groot" --privkey privkey.pem $PWD/hostdir/binpkgs
And then make a signature per package:
$ xbps-rindex --sign-pkg --privkey privkey.pem $PWD/hostdir/binpkgs/*.xbps
If --privkey is unset, it defaults to
~/.ssh/id_rsa
.
If the RSA key was protected with a passphrase you'll have to type it, or alternatively set
it via the XBPS_PASSPHRASE
environment variable.
Once the binary packages have been signed, check the repository contains the appropriate hex fingerprint
:
$ xbps-query --repository=hostdir/binpkgs -vL
...
Each time a binary package is created, a package signature must be created with --sign-pkg
.
It is not possible to sign a repository with multiple RSA keys.
Packages are overwritten on every build to make getting package with changed build options easy.
To make xbps-src skip build and preserve first package build with with given version and revision,
same as in official void repository, set XBPS_PRESERVE_PKGS=yes
in etc/conf
file.
Reinstalling a package in your target rootdir
can be easily done too:
$ xbps-install --repository=/path/to/local/repo -yf xbps-0.25_1
Using -f
flag twice will overwrite configuration files.
Please note that the
package expression
must be properly defined to explicitly pick up the package from the desired repository.
Setup the slaves (machines that will compile the code):
# xbps-install -Sy distcc
Modify the configuration to allow your local network machines to use distcc (e.g. 192.168.2.0/24
):
# echo "192.168.2.0/24" >> /etc/distcc/clients.allow
Enable and start the distccd
service:
# ln -s /etc/sv/distccd /var/service
Install distcc on the host (machine that executes xbps-src) as well. Unless you want to use the host as slave from other machines, there is no need to modify the configuration.
On the host you can now enable distcc in the void-packages/etc/conf
file:
XBPS_DISTCC=yes
XBPS_DISTCC_HOSTS="localhost/2 --localslots_cpp=24 192.168.2.101/9 192.168.2.102/2"
XBPS_MAKEJOBS=16
The example values assume a localhost CPU with 4 cores of which at most 2 are used for compiler jobs. The number of slots for preprocessor jobs is set to 24 in order to have enough preprocessed data for other CPUs to compile. The slave 192.168.2.101 has a CPU with 8 cores and the /9 for the number of jobs is a saturating choice. The slave 192.168.2.102 is set to run at most 2 compile jobs to keep its load low, even if its CPU has 4 cores. The XBPS_MAKEJOBS setting is increased to 16 to account for the possible parallelism (2 + 9 + 2 + some slack).
In etc/conf you may optionally define a mirror or a list of mirrors to search for distfiles.
$ echo 'XBPS_DISTFILES_MIRROR="ftp://192.168.100.5/gentoo/distfiles"' >> etc/conf
If more than one mirror is to be searched, you can either specify multiple URLs separated with blanks, or add to the variable like this
$ echo 'XBPS_DISTFILES_MIRROR+=" https://sources.voidlinux.org/"' >> etc/conf
Make sure to put the blank after the first double quote in this case.
The mirrors are searched in order for the distfiles to build a package until the checksum of the downloaded file matches the one specified in the template.
Ultimately, if no mirror carries the distfile, or in case all downloads failed the checksum verification, the original download location is used.
If you use uchroot
for your XBPS_CHROOT_CMD, you may also specify a local path
using the file://
prefix or simply an absolute path on your build host (e.g. /mnt/distfiles).
Mirror locations specified this way are bind mounted inside the chroot environment
under $XBPS_MASTERDIR and searched for distfiles just the same as remote locations.
Currently xbps-src
can cross build packages for some target architectures with a cross compiler.
The supported target is shown with ./xbps-src -h
.
If a source package has been adapted to be cross buildable xbps-src
will automatically build the binary package(s) with a simple command:
$ ./xbps-src -a <target> pkg <pkgname>
If the build for whatever reason fails, might be a new build issue or simply because it hasn't been adapted to be cross compiled.
xbps-src can be used in any recent Linux distribution matching the CPU architecture.
To use xbps-src in your Linux distribution use the following instructions. Let's start downloading the xbps static binaries:
$ wget http://repo-default.voidlinux.org/static/xbps-static-latest.<arch>-musl.tar.xz
$ mkdir ~/XBPS
$ tar xvf xbps-static-latest.<arch>-musl.tar.xz -C ~/XBPS
$ export PATH=~/XBPS/usr/bin:$PATH
If xbps-uunshare
does not work because of lack of user_namespaces(7)
support,
try other chroot methods.
Clone the void-packages
git repository:
$ git clone https://github.com/void-linux/void-packages.git
and xbps-src
should be fully functional; just start the bootstrap
process, i.e:
$ ./xbps-src binary-bootstrap
The default masterdir is created in the current working directory, i.e void-packages/masterdir
.
If for some reason you must update xbps-src and the bootstrap-update
target is not enough, it's possible to recreate a masterdir with two simple commands (please note that zap
keeps your ccache/distcc/host
directories intact):
$ ./xbps-src zap
$ ./xbps-src binary-bootstrap
Sometimes the bootstrap packages must be updated to the latest available version in repositories, this is accomplished with the bootstrap-update
target:
$ ./xbps-src bootstrap-update
Two ways are available to build 32bit packages on x86_64:
- native mode with a 32bit masterdir (recommended, used in official repository)
- cross compilation mode to i686 target
The canonical mode (native) needs a new x86 masterdir
:
$ ./xbps-src -m masterdir-x86 binary-bootstrap i686
$ ./xbps-src -m masterdir-x86 ...
Canonical way of building packages for same architecture but different C library is through dedicated masterdir. To build for x86_64-musl on glibc x86_64 system, prepare a new masterdir with the musl packages:
$ ./xbps-src -m masterdir-x86_64-musl binary-bootstrap x86_64-musl
Your new masterdir is now ready to build packages natively for the musl C library:
$ ./xbps-src -m masterdir-x86_64-musl pkg ...
To rebuild all packages in base-system
for your native architecture:
$ ./xbps-src -N pkg base-system
It's also possible to cross compile everything from scratch:
$ ./xbps-src -a <target> -N pkg base-system
Once the build has finished, you can specify the path to the local repository to void-mklive
, i.e:
# cd void-mklive
# make
# ./mklive.sh ... -r /path/to/hostdir/binpkgs