APC UPS Nagios Check

This Nagios/Icinga Check provides the ability to query APC UPS devices (aka PowerNet) for current status.

It will output voltages, frequencies, battery state and other values as performance data for tools like pnp4nagios.
Implementation is in Python. You will need Python libraries nagiosplugin and pysnmp as dependencies. You can use Python 2 or Python 3.

You need to enable the SNMP Agent on your APC device and set a SNMP Read community.

Installation (manual using pip) on your Nagios Host

pip3 install -r requirements.txt
python3 setup.py install
ln -s /usr/bin/check_ups_apc /usr/lib/nagios/plugins/check_ups_apc

Installation Debian package

For Debian you can use the provided Debian package. Debian 8 (Jessie) and higher should be fine without any additional packages. For building the Debian package use:

Usage example

Nagios Plugin called manually:

./check_ups_apc -H 10.0.0.1 -C public

See check_ups_apc -h for additional command line arguments. Use -vvv to get Debug Output including additional system information. Use -b to ignore battery replacement warnings.

Using a config file

You can use a config file to change ranges of the warning and critical value ranges for the different monitored devices. The config is expected to be named /etc/check_ups_apc.conf. Use the command line switch --config (-c) to override this behaviour.

The config file must contain sections named after the specified hostname/hostaddress of the device (parameter -H) of the check_ups_apc call. You can list the changed parameters within this section. Non present values will be set to default values.

Example (all values are the default values):

/etc/check_ups_apc.conf

[10.0.0.1]
input_voltage_min_warn = 215
input_voltage_min_crit = 210
input_voltage_max_warn = 240
input_voltage_max_crit = 245

input_frequency_min_warn = 48
input_frequency_min_crit = 47
input_frequency_max_warn = 52
input_frequency_max_crit = 53

output_voltage_min_warn = 215
output_voltage_min_crit = 210
output_voltage_max_warn = 240
output_voltage_max_crit = 245

output_frequency_min_warn = 48
output_frequency_min_crit = 47
output_frequency_max_warn = 52
output_frequency_max_crit = 53

battery_capacity_min_warn = 70
battery_capacity_min_crit = 50

battery_temperature_min_warn = 15
battery_temperature_min_crit = 10
battery_temperature_max_warn = 30
battery_temperature_max_crit = 40

output_load_max_warn = 70
output_load_max_crit = 85

Nagios Integration

Define the commands for Nagios checks and include it in the service definitions:

define command {
	command_name	check_ups_apc
	command_line	/usr/lib/nagios/plugins/check_ups_apc -C $ARG1$ -H $HOSTADDRESS$
}
define service {
	use			generic-service-perfdata
	hostgroup_name		ups_apc
	service_description	check_ups_apc
	check_command		check_ups_apc!SNMP_COMMUNITY
}