dxlAPRS_Scanner

dxlAPRS_scanner - dxlAPRS extension for scanning frequencies

This project contains scanner written in c++ to scan and decode multiple frequencies in the same time.

I would be very happy about ideas and further developments!

You can find scripts to start dxlAPRS and the scanner here. https://github.com/DO2JMG/dxlAPRS_Scripte

Example :

Example frequency list created by the scanner

Unpack and compile :

  git clone https://github.com/DO2JMG/dxlAPRS_Scanner.git
  cd dxlAPRS_Scanner
  mkdir build
  cd build
  cmake ..
  make

Run example :

  ./scanner -p 18051 -u 17051 -f 404000000 -s 1500 -v -o sdrcfg-rtl0.txt -b blacklist.txt -w whitelist.txt -q 55 -n 5 &

Stop :

  killall scanner

Changing parameters for sdrtst :

Adding the following command line argument will enable to send Level table. Replace IP and port with your data, in the example they are just placeholders

  -L <ip>:<port>

Changing parameters for sondeudp :

Adding the following command line argument will enable to send decoded data. Replace IP and port with your data, in the example they are just placeholders

  -M <ip>:<port>

Changing parameters for sdrcfg-rtl0.txt (Frequencies list):

Adding the following line to your channel-file

  s 404.000 406.000 1500 6 3000

Blacklist example :

Add frequencies in kilohertz to the list. Frequencies are separated by a new line.

  405320
  404230

Whitelist example :

Add frequencies in kilohertz,bandwidth khz and afc to the list. Frequencies are separated by a new line.

  405700,6,5
  403000,18,8
  401100,6,5

Allowed options:

Argument	Description	Value
-q	Squelch	65
-f	Start frequency in Hz	404000000
-s	Steps in Hz	1500
-p	UDP-port from sdrtst to receive level table	18050
-u	UDP-port from sondeudp to receive info	17050
-t	Holding-Timer in seconds	120
-o	Filename frequencies	sdrcfg-rtl0.txt
-b	Filename blacklist	blacklist.txt
-w	Filename whitelist	whitelist.txt
-n	Level (Default is 5) > 5 higher sensitivity	5
-l	audio lowpass	0
-m	max frequencies	10
-v	Verbous mode

Tuner Settings:

Argument	Description	Value
-ts	Tuner Settings 1 = enabled - 0 = disabled	0 or 1
-tga	Tuner auto gain 0 = automatic - 1 = manual	0 or 1
-tgc	Tuner gain correction 1 = enabled - 0 = disabled	0 or 1
-tp	Tuner ppm	0
-tg	Tuner gain	0 - 49