Skip to content

DilanUA/kubernetes-is

 
 

Repository files navigation

Kubernetes and Helm Resources for WSO2 Identity And Access Management

This repository contains Kubernetes and Helm Resources for container-based deployments of the following WSO2 Identity Server deployment patterns.

  • A clustered deployment of WSO2 Identity Server

A clustered deployment WSO2 Identity Server

Deploy Kubernetes resources

In order to deploy Kubernetes resources for each deployment pattern, follow the Quick Start Guide for each deployment pattern given below:

Deploy Helm resources

In order to deploy Helm resources for each deployment pattern, follow the Quick Start Guide for each deployment pattern given below:

How to update configurations

Kubernetes resources for WSO2 products use Kubernetes ConfigMaps to pass on the minimum set of configurations required to setup a product deployment pattern.

For example, the minimum set of configurations required to setup a clustered deployment of WSO2 Identity Server can be found in <KUBERNETES_HOME>/is/confs directory. The Kubernetes ConfigMaps are generated from these files.

If you intend to pass on any additional configuration changes, you may use Kubernetes ConfigMaps. Follow the steps below to achieve it.

[1] In order to apply the updated configurations, WSO2 product server instances need to be restarted. Hence, un-deploy all the Kubernetes resources corresponding to the product deployment, if they are already deployed.

[2] Create a Kubernetes ConfigMap from the file(s), which contains the relevant configuration changes.

The need to create a Kubernetes ConfigMap may depend on the type of file(s) to be passed on to the cluster, as follows:

[i] If the additional configuration is part of a file, which is among the minimum set of files with configuration changes required to setup the particular product deployment pattern, use the same copy of the file to pass on the configuration.

e.g. <KUBERNETES_HOME>/is/confs/carbon.xml is a file which is part of the minimum set of files with configuration changes required for a clustered deployment of WSO2 Identity Server. If you intend to make the configuration change in the <WSO2_IS_HOME>/repository/conf/carbon.xml file in the product pack (which is the original file corresponding to <KUBERNETES_HOME>/is/confs/carbon.xml file), make the configuration change within the file copy <KUBERNETES_HOME>/is/confs/carbon.xml.

[ii] If the additional configuration file is not included among the minimum set of files with configuration changes required to setup a particular product deployment pattern, but is part of a directory within the original product pack to which you already pass other configuration files using a Kubernetes ConfigMap, include the file within the appropriate location in <KUBERNETES_HOME>/is/confs folder or any of its sub-folders.

e.g. Assume that you need to change a configuration in <WSO2_IS_HOME>/repository/conf/datasources/metrics-datasources.xml file. <WSO2_IS_HOME>/repository/conf/datasources/metrics-datasources.xml is not among the minimum set of configuration files adjusted for a clustered deployment of WSO2 Identity Server. A Kubernetes ConfigMap is already created from <KUBERNETES_HOME>/is/confs/datasources folder, passing configuration files to <WSO2_IS_HOME>/repository/conf/datasources/ in the original product pack. Hence, you can add a copy of the metrics-datasources.xml with relevant changes to <KUBERNETES_HOME>/is/confs/datasources folder, in order to pass on the configuration file.

[iii] If the additional configuration file is not included among the minimum set of files with configuration changes required to setup a particular product deployment pattern and is not part of any directory within the original product pack to which you already pass other configuration files using Kubernetes ConfigMaps, follow the steps given below along with appropriate examples in each step.

For example, assume that you need to pass on a copy of the changed <WSO2_IS_HOME>/repository/conf/tomcat/catalina-server.xml file to the Kubernetes cluster, for a clustered deployment of WSO2 Identity Server. <PATH_TO_CONFIG_FILE> is the path to a local copy of <WSO2_IS_HOME>/repository/conf/tomcat/catalina-server.xml file.

  • Create a folder in your local machine's filesystem, add the file with configuration changes to the created folder and create a Kubernetes ConfigMap.

e.g.

# create a folder
mkdir config

# copy the changed configuration file to the created folder
cp <PATH_TO_CONFIG_FILE> config

# create a Kubernetes ConfigMap
kubectl create configmap identity-server-tomcat --from-file=config/
  • Populate a volume with data stored in the created Kubernetes ConfigMap. For this purpose, update the appropriate Kubernetes Deployment resource(s). When mounting the created Kubernetes ConfigMap at the product container, it has to be mounted to the relevant path within the /home/wso2carbon/wso2-config-volume folder in the product container, while maintaining the appropriate WSO2 product home folder structure.

e.g. Update the volumes' (spec.template.spec.volumes) and volume mounts' (spec.template.spec.containers[wso2is].volumeMounts) sections in <KUBERNETES_HOME>/is/identity-server-deployment.yaml file. The mountPath (which is /home/wso2carbon/wso2-config-volume/repository/conf/tomcat) has been derived based on the target folder structure within the original product pack (which is <WSO2_IS_HOME>/repository/conf/tomcat) and assuming that /home/wso2carbon/wso2-config-volume is the product home root folder.

volumeMounts:
...
- name: is-tomcat-config-volume
  mountPath: "/home/wso2carbon/wso2-config-volume/repository/conf/tomcat"

volumes:
...
- name: is-tomcat-config-volume
  configMap:
    name: identity-server-tomcat

[3] Deploy the Kubernetes resources as defined in section Quick Start Guide for the relevant deployment pattern.

How to provide additional artifacts

If you intend to pass on any additional artifacts such as, third-party libraries, OSGi bundles and security related artifacts to the Kubernetes cluster, you may mount the desired content to /home/wso2carbon/wso2-artifact-volume directory path within a WSO2 product Docker container.

The following example depicts how this can be achieved when passing additional artifacts to WSO2 Identity Server nodes in a clustered deployment of WSO2 Identity Server:

[1] In order to apply the updated configurations, WSO2 product server instances need to be restarted. Hence, un-deploy all the Kubernetes resources corresponding to the product deployment, if they are already deployed.

[2] Create and export a directory within the NFS server instance.

[3] Add the additional third-party libraries, OSGi bundles and security related artifacts, into appropriate folders matching that of the relevant WSO2 product home folder structure, within the previously created directory.

[4] Grant ownership to wso2carbon user and wso2 group, for the directory created in step [2].

sudo chown -R wso2carbon:wso2 <directory_name>

[5] Grant read-write-execute permissions to the wso2carbon user, for the directory created in step [2].

chmod -R 700 <directory_name>

[6] Map the directory created in step [2] to a Kubernetes Persistent Volume in the persistent volume resource file <KUBERNETES_HOME>/is/volumes/persistent-volumes.yaml

For example, append the following entry to the file:

apiVersion: v1
kind: PersistentVolume
metadata:
  name: identity-server-additional-artifact-pv
  labels:
    purpose: is-additional-artifacts
spec:
  capacity:
    storage: 1Gi
  accessModes:
    - ReadWriteMany
  persistentVolumeReclaimPolicy: Retain
  nfs:
    server: <NFS_SERVER_IP>
    path: "<NFS_LOCATION_PATH>"

Provide the appropriate NFS_SERVER_IP and NFS_LOCATION_PATH.

[7] Create a Kubernetes Persistent Volume Claim to bind with the Kubernetes Persistent Volume defined in step [6].

For example, append the following entry to the file <KUBERNETES_HOME>/is/identity-server-volume-claim.yaml:

apiVersion: v1
kind: PersistentVolumeClaim
metadata:
  name: identity-server-additional-artifact-volume-claim
spec:
  accessModes:
    - ReadWriteMany
  resources:
    requests:
      storage: 1Gi
  storageClassName: ""
  selector:
    matchLabels:
      purpose: is-additional-artifacts

[8] Update the appropriate Kubernetes Deployment resource(s).

For example in the discussed scenario, update the volumes (spec.template.spec.volumes) and volume mounts (spec.template.spec.containers[wso2is].volumeMounts) in <KUBERNETES_HOME>/is/identity-server-deployment.yaml file as follows:

volumeMounts:
...
- name: is-additional-artifact-storage-volume
  mountPath: "/home/wso2carbon/wso2-artifact-volume"

volumes:
...
- name: is-additional-artifact-storage-volume
  persistentVolumeClaim:
    claimName: identity-server-additional-artifact-volume-claim

[9] Deploy the Kubernetes resources as defined in section Quick Start Guide for a clustered deployment of WSO2 Identity Server.

About

No description, website, or topics provided.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Shell 92.3%
  • Smarty 7.7%