Frsky Archer receivers will not register

[Richjanz]

I have recently flashed my Horus x10s express from OpenTx to EdgeTx 2.8. I also had the models converted to Edge. However now I have lost my receivers. I have 3 Frysky Archer 8R Pros and one 10R Pro. None of them will register so I cannot bind them. I tried all sorts of ways to register them to no avail. I'm wondering if I should go back to OpenTx 2.3.15 and then start again with Edge

[pfeerick]

Funnily enough, I actually had an Archer GR8 out earlier today to test something, and was able to both register and bind it on X9D+2019 running 2.8, so it may be something specific to the colorlcd side of things.

[rolfz]

me too please fix it it worked under opentx i have rx6r

[rolfz]

what i need to do to my hw

[Richjanz]

If I go to the airplanes that were working and turn them on the receiver LED is red asif it waiting for the tx. I wonder if there is a problem with the internal RF ,ISRM module

[Richjanz]

Problem solved. I replaced the internal ISRM R/F card and everything is working as it should. I thank everyone for their input with this problem. Turned out to be a hardware problem.

[pfeerick]

Damn. Sorry to hear that. Glad you got it working though! :)

[rolfz]

i do not understand how to fix the problem have you a picture of the hw fix is the fix on the tx side of my qx7

[rolfz]

Great what do i need to load on my taranisEnvoyé de mon iPhoneLe 27 déc. 2023 à 17:19, Richjanz ***@***.***> a écrit : Closed #3151 as resolved. —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>

[rolfz]

how can i make it work for me ??

[pfeerick]

You can start off by explaining what hardware you are using... what transmitter? You mention taranis and rx6r, so an ACCESS compatible receiver... I'm *guessing* Taranis X9D+2019? What version of EdgeTX are you using? Are the receivers indicating they don't have a link with the transmitter at all? Is it registration or binding that is the problem? The person who had issues before had a Horus X10S Express, and unfortunately it seems like the internal RF failed, so the ISRM RF board needed replacing.

…

On Thu, Dec 28, 2023 at 7:14 PM rolfz ***@***.***> wrote: how can i make it work for me ?? — Reply to this email directly, view it on GitHub <#3151 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KMJMXMLJYQWL55L4Z3YLU2AFAVCNFSM6AAAAAAUR72BYKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSNRTGI3DG> . You are receiving this because you commented.Message ID: ***@***.***>

[rolfz]

Thank you for the Answer, I have Taranis QX7 tx and the latest edgetx 929 fwLets hope this helpsRolfEnvoyé de mon iPhoneLe 28 déc. 2023 à 10:34, Peter Feerick ***@***.***> a écrit : You can start off by explaining what hardware you are using... what transmitter? You mention taranis and rx6r, so an ACCESS compatible receiver... I'm *guessing* Taranis X9D+2019? What version of EdgeTX are you using? Are the receivers indicating they don't have a link with the transmitter at all? Is it registration or binding that is the problem? The person who had issues before had a Horus X10S Express, and unfortunately it seems like the internal RF failed, so the ISRM RF board needed replacing.

On Thu, Dec 28, 2023 at 7:14 PM rolfz ***@***.***> wrote: how can i make it work for me ?? — Reply to this email directly, view it on GitHub <#3151 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KMJMXMLJYQWL55L4Z3YLU2AFAVCNFSM6AAAAAAUR72BYKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSNRTGI3DG> . You are receiving this because you commented.Message ID: ***@***.***>

—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***>

[pfeerick]

When you say Q X7, this is the ACCESS version (not the ACCST version)? And when you flashed EdgeTX v2.9.2, you used the Frsky QX7 ACCESS option? When you try to enable the internal RF, does it give you ISRM or XJT as the option?

…

On Thu, Dec 28, 2023 at 7:44 PM rolfz ***@***.***> wrote: Thank you for the Answer, I have Taranis QX7 tx and the latest edgetx 929 fwLets hope this helpsRolfEnvoyé de mon iPhoneLe 28 déc. 2023 à 10:34, Peter Feerick ***@***.***> a écrit : You can start off by explaining what hardware you are using... what transmitter? You mention taranis and rx6r, so an ACCESS compatible receiver... I'm *guessing* Taranis X9D+2019? What version of EdgeTX are you using? Are the receivers indicating they don't have a link with the transmitter at all? Is it registration or binding that is the problem? The person who had issues before had a Horus X10S Express, and unfortunately it seems like the internal RF failed, so the ISRM RF board needed replacing. On Thu, Dec 28, 2023 at 7:14 PM rolfz ***@***.***> wrote: > how can i make it work for me ?? > > — > Reply to this email directly, view it on GitHub > < #3151 (comment)>, > or unsubscribe > < https://github.com/notifications/unsubscribe-auth/ABJ66KMJMXMLJYQWL55L4Z3YLU2AFAVCNFSM6AAAAAAUR72BYKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSNRTGI3DG> > . > You are receiving this because you commented.Message ID: > ***@***.***> > —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you commented.Message ID: ***@***.***> — Reply to this email directly, view it on GitHub <#3151 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABJ66KPHSHFJV5ZMD24NYH3YLU5OXAVCNFSM6AAAAAAUR72BYKVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TSNRTGQ2DQ> . You are receiving this because you commented.Message ID: ***@***.***>