joystickjog

Use PS3 SIXAXIS to jog fabtotum.

Connect SIXAXIS to FabTotum USB port and click "Activate Joystick" button.

This version uses a JSON config file to connect buttons to a function.

The plan is for this config to be available from the JOG menu, but that has not been implemented yet.
For the moment a default config file located in "/var/www/fabui/application/plugins/joystickjog/assets/python/" is used.

The following functions is fixed and can not be set with the config file:
Left Joystick X : FabTotum X-axis
Left Joystick Y : FabTotum Y-axis
Right Joystick Y: Fabtotum Z-axis
Circle: Quit


The following functions is set in the default config file:
Up Button : Increase feedrate (Step value can be set in the config file)
Down Button : Decrease feedrate (Step value can be set in the config file)
Select Button : Z-Probe up /down
PS Button : Reset safety warning R2 Button : Extruder feed (Feedate can be set in the config file)
L2 Button : Extruder retract (Feedate can be set in the config file)
Start Button : Set X,Y and Z zero position.
Left JS Button : Goto zero position (Feedate can be set in the config file)
L1 Button : Toggle between 5 and 100% feedrate (Slow rate can be set in the config file)
Square Button : Toggle Bed temp between 0 and 65C (Temp can be set in the config file)
Cross Button : Toggle Extruder temp between 0 and 210C (Temp can be set in the config file)