Installation • Quick Usage • User Manual • Changelog
Since autumn 2023 this repo you have reached is the official successor of Lars' awesome Skyscraper and also the official version used in RetroPie. Read all about the change since then here. Happy scraping!
Skyscraper was temporarily maintained by Joe Huss (2022-2023). The original project is by Lars Muldjord (2017-2022), who did all the heavy lifting.
In addition to this brief README, there is the extensive user manual. It contains everything from docs/ but with an enhanced layout (mkdocs) which should be easier to read and navigate.
A powerful and versatile yet easy to use game scraper written in C++ for use with multiple frontends running on a Linux system (macOS and Windows too, but not officially supported). It scrapes and caches various game resources from various scraping sources, including media such as screenshot, cover and video. It then gives you the option to generate a game list and artwork for the chosen frontend by combining all of the cached resources.
All Skyscraper features are well-documented and there's also a F.A.Q with answers.
Check the full list of platforms here.
- EmulationStation
- AttractMode
- Pegasus
- RetroBat
Skyscraper supports a variety of different scraping sources called scraping modules. Use these to gather game data into the Skyscraper resource cache. Check the full list of scraping modules here and read more about the resource cache here.
I welcome any contributions, although I would like to keep things backwards compatible.
Follow the steps below to install the latest version of Skyscraper. Lines beginning with $ signifies a command you need run in a terminal on the machine you wish to install it on.
NOTE! If you are using the RetroPie distribution, you have the option to install Skyscraper directly from the RetroPie-Setup script (you need to update the script before installing it!). Read more about all of that here. If not, read on.
This goes in the usual RetroPie stanza: Either run sudo RetroPie-Setup/retropie_setup.sh and folow the menus (Manage packages -> Manage optional packages -> then look for Skyscraper) or run sudo RetroPie-Setup/retropie_packages.sh skyscraper.
Skyscraper needs Qt5.3 or later to compile. For a Retropie, Ubuntu or other Debian derived distro, you can install Qt5 using the following commands:
$ sudo apt update
$ sudo apt install qtbase5-dev qtchooser qt5-qmake qtbase5-dev-tools p7zip-full
You might be asked for your sudo password. On RetroPie the default password is raspberry. To install Qt5 on other Linux distributions, please refer to their documentation.
Skyscraper works perfectly on macOS as well but is not officially supported as I don't own a Mac. But with the help of HoraceAndTheSpider and abritinthebay here's the commands needed to install the Qt5 and other prerequisites:
$ /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
$ brew install gnu-tar
$ brew install wget
$ brew install qt@5
$ brew link qt@5 --force
If that went well, proceed to the default installation instructions in the next section. It should work and give you a working installation of Skyscraper.
When you've installed the prerequisites as described above for Linux or macOS, you can install Skyscraper by typing in the following commands:
$ cd
$ mkdir skysource
$ cd skysource
$ wget -q -O - https://raw.githubusercontent.com/Gemba/skyscraper/master/update_skyscraper.sh | bash
The last command will download and run the latest update script from Github. The script installs the latest release of Skyscraper. During the installation you might be asked for your sudo password. On RetroPie the default password is raspberry.
When the script has completed you are ready to run Skyscraper!
From Skyscraper 2.3.2 and newer you can update to the latest version simply by running the following commands:
$ cd
$ cd skysource
$ ./update_skyscraper.sh
You might be asked for your sudo password during the update. On RetroPie the default password is raspberry. If your version is older than 2.3.2 (check with --help) you need to follow the installation instructions instead.
If you want to build the latest main/HEAD version use the following commands. Make sure to have the before mentioned packages installed:
git clone --depth 1 https://github.com/Gemba/skyscraper.git
cd skyscraper
[[ -f Makefile ]] && make --ignore-errors clean
rm --force .qmake.stash
QT_SELECT=5 qmake
make -j$(nproc)
sudo make install
If you've installed Skyscraper using the instructions in this readme, you can uninstall it using the following commands:
$ cd
$ cd skysource
$ sudo make uninstall
$ cd
$ rm -Rf skysource
$ rm -Rf ~/.skyscraper
You might be asked for your sudo password during the processs. On RetroPie the default password is raspberry.
Windows is not officially supported at this time! However, you may roll your own Windows 64-bit version that works just fine. And just to be clear: You are on your own if you use this version - please don't ask me questions about it. Use the sources.
IMPORTANT!!! In order for Skyscraper to work properly, it is necessary to quit your frontend before running it! If you're running EmulationStation, you can quit it by pressing F4.
Remember, you can completely customize the artwork Skyscraper exports. Check out the documentation here. If you just want to use the default (pretty cool looking) artwork Skyscraper provides, read on.
For first-time users I recommend reading the short and to-the-point use case. Please read it and get back here when you got the gist of it.
Skyscraper is a command line tool, and has many, many options for you to fiddle around with. I recommend taking a look at all of them to familiarize yourself with the possibilites:
$ Skyscraper --help
$ Skyscraper --flags help
$ Skyscraper --cache help
This will give you a description of everything Skyscraper can do if you feel adventurous! For a thorough description of all available options, check here.
The most important ones are probably:
-p <PLATFORM>-s <SCRAPING MODULE>-u <USER:PASS>or-u <KEY>--cache refresh--flags videos
If you have your roms in a non-default location (default for RetroPie users is /home/<USER>/RetroPie/roms/<PLATFORM>) or wish to export the game list or artwork to non-default locations, you will also need these:
-i <PATH>-g <PATH>-o <PATH>
For almost any command line option, consider setting them in the /home/<USER>/.skyscraper/config.ini file as described here. This will make the options permanent so you don't need to type them in all the time.
Skyscraper offers several ways of gathering data for a subset of roms. If you just want to scrape the roms that have no data in the cache whatsoever, you can do so with the --onlymissing command-line option. You can also check out the --startat FILENAME and --endat FILENAME options. If you just want to gather data for a couple of roms you can simply add the filename(s) to the end of the command-line (eg. Skyscraper -p amiga -s openretro "/path/to/rom name 1.lha" "/path/to/rom name 2.lha"). And probably the most advanced (and quite handy) way to gather data for a subset of roms is to make use of the --cache report:missing=RESOURCE option. This can generate a report containing the filenames that are missing a certain resource. You can then feed the report back into Skyscraper with the --fromfile REPORTFILE afterwards. Skyscraper will then only scrape the files contained in the report.
A lesser known, but extremely useful, feature of Skyscraper is to add your desired config variables to /home/<USER>/.skyscraper/config.ini. Any options set in this file will be used by default by Skyscraper. So if you always use, for example, -i <SOME FOLDER> on command line, you can set the matching option inputFolder="<SOME FOLDER>" in the config.
For a full description of all availabe config options, check here.
One of Skyscraper's most powerful features is the resource cache. It's important to understand how this works in order to use Skyscraper to its full potential. Read more about it here.
I addition to allowing scraping from locally cached resources, Skyscraper also allows you to import your own data into the resource cache with the -s import scraping module. You can also edit existing resources in the cache or add individual user resources with the --cache edit command. Lastly, you also have the option of importing existing EmulationStation game list data into the Skyscraper resource cache if you need it. You can do this with the -s esgamelist scraping module.
To read more about any of the features described above, please check out all of the documentation here.
Check the full artwork documentation here
The main goal of this fork is to allow users to easily configurate and add platforms without having the needs to edit the code source directly.
This feature is achieved by adding new config files:
- peas.json: Describes now the supported platforms by Skyscraper. See all details here.
- platforms_idmap.csv: Maps the local platform name to the platform ID of screenscraper.fr, Mobygames or The Games DB web API.
These files are copied in the folder /home/pi/.skyscraper on RetroPie (or /usr/local/etc/skyscraper/ in general) at the first run of the program if you want to edit them after an installation.
Release notes for older releases which this fork builds on can be found here.