Skip to content

Ansible role for building and installing SnapRAID, as well as automating the syncing and srcubbing via cron.

License

Notifications You must be signed in to change notification settings

JonasAlfredsson/ansible-role-snapraid

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

29 Commits
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

ansible-role-snapraid

An Ansible role which will download, build and install SnapRAID on Debian 12 (other releases are untested).

This role supports defining multiple SnapRAID arrays, each with their own configuration file, and the syncing/scrubbing process for them can be automated via the included snapraid_sync script. It is cron that is used to trigger the script on a configurable schedule, and it will send you notification emails when syncs are successful, threshold levels for deleted/updated files are exceeded or something else goes wrong.

Installation

This repository makes use of a submodule, which is just pointer to another repository, and it needs to be initialized and downloaded as well before this role will work. Fortunately it is possible to do this in just a single command, so move into your roles/ folder and run the following:

git clone --recursive git@github.com:JonasAlfredsson/ansible-role-snapraid.git snapraid

If you would like to download any updates for this role in the future, you may use the following command from within the previously cloned folder:

git pull --recurse-submodules

When the configuration is complete you may then just include this role in your main playbook like this:

- hosts: all
  name: Install SnapRAID and push out configuration files
  roles:
    - snapraid

Usage

Since the SnapRAID arrays are often unique to each individual host, I usually prefer to define these individual configurations in their respective host_vars/{{ ansible_hostname }} path. However, if you have multiple identical machines there should not be any problem to define all of this in one of the group_vars/ files.

An important thing to remember is that Ansible will overwrite, and not merge, these kinds of hashes/dictionaries if there are two with the same name. You can therefore not have a part of this be defined in the group_vars/ and then other parts in the host_vars/. If you do not like this behavior you may look into setting hash_behaviour = merge, but be aware that this is not a very good solution. Instead you should probably look into the combine filter or the merge_vars action plugin.

Example Configuration

There are sort of two parts to this configuration; first SnapRAID itself and its arrays, and then it is variables related to the snapraid_sync script. The second one is not necessary if you don't want to, but it will automate the syncing/scrubbing if configured.

The following examples have all the available variables included, and all the default values written out. So any field which is not marked with # Required may be left out of your configuration if you are fine with the defaults.

SnapRAID

List of available SnapRAID versions/tags may be found here. Example: snapraid_version: "11.3"

snapraid_version:  # Required
snapraid_tmp_dir: "/tmp"
snapraid_arrays:
  - name:  # Required and may only be [a-zA-Z_-] (limit from cron file naming).
    conf_dir: # Required
    exclude_hidden_items: false
    exclude_items:
      - "*.unrecoverable"
      - "/tmp/"
      - "/lost+found/"
    blocksize: 256
    hashsize: 16
    autosave: 500
    parity_drives:
      - mount:  # Required
        content_file: false
    data_drives:
      - mount:  # Required
        name:  # Required and must be unique (space not allowed).
        content_file: true
    snapraid_sync: []  # See next section for more details

Jump directly to the snapraid_sync section.

As can be seen the snapraid_arrays variable is a list, so it is possible to expand it to as many arrays that you want. You should only make sure that they have unique names.

The parity_drives variable is also a list, and you will need at minimum one parity drive defined for this role to function (with a maximum of 6 supported by SnapRAID). The parity mounts must NOT be in a data disk.

Example:

parity_drives:
  - mount: "/mnt/parity1"
  - mount: "/mnt/parity2"

There are no limits (that I know of) for how many data disks you may have. These are also defined as a list, and it is important that all have unique names since these are used as identifiers by SnapRAID. The name and mount point association of the data disks is relevant for parity, so do not change them afterwards.

Example:

  data_drives:
    - mount: "/mnt/data1"
      name: "D1"
    - mount: "/mnt/data2"
      name: "D2"

You must also have at least one content file for each parity file plus one. These content files can be in the disks used for data, parity or boot, but each file must be in a different disk. The first and primary content file is created inside the conf_dir along with the .conf file for this array.

By default it is also configured so that each data disk includes a content file located at {{ mount }}/.snapraid_{{ name }}.content. This has the added benefit of making total amount of available space on the data disk slightly less than the full disk amount. This is a recommended thing to do, because the parity file will be slightly larger than the amount of synced data, and this content file is excluded from the sync, so it creates a natural buffer to hinder the parity disk from being overfilled.

Then there are the remaining variables and their short explanations:

  • exclude_items - List of files and directories to exclude.
    • Remember that all the paths are relative at the mount points.
  • exclude_hidden_items - Hidden items will be ignored during 'syncs'.
    • In Unix systems this is usually files beginning with a period.
  • autosave - Number of gigabytes to process before saving the state.
    • This option is useful to avoid having to restart from scratch if a long 'sync' is interrupted (0 to disable).
  • blocksize - The block size in kibi bytes (1024 bytes).
    • WARNING: Changing this value is for experts only!
  • hashsize - The hash size in bytes.
    • WARNING: Changing this value is for experts only!

snapraid_sync

This is a script used for automating the syncing and scrubbing process, so manual intervention will only be necessary when the number of deleted/updated files exceed your defined thresholds. A detailed explanation of this "manual intervention" can be found in its repository, along with more information about the inner workings of this script, but there is also some extra info at the bottom of this guide.

Anyway, the automatic syncing is defined on a per-array basis (first mentioned in the previous section), and the *_schedule variables are then normal cron expressions.

snapraid_arrays:
  - name:  # Defined in previous section.
    config:  # Defined in previous section.
    ...
    snapraid_sync:
      - sync_schedule: "05 9,22 * * 2-7"  # Example -> sync at 09:05 and 22:05 every day except monday.
        scrub_schedule: "00 13 * * mon"  # Example -> scrub at 13:00 on mondays.
        delete_threshold: 0
        update_threshold: -1
        scrub_percent: 8
        scrub_age: 10
        attach_log: "false"

If you want to be notified by email, on successful syncs or errors, you should define the snapraid_sync_email_address variable. However, in order to be able to receive emails over the open internet you will need an account on a trusted provider and configure the mutt email client to use that account (details here). As of now there is only support for automatically configuring Gmail accounts in the muttrc file, but if you have such an account the following variables are available:

snapraid_sync_email_address: ""
snapraid_sync_email_subject_prefix: "SnapRAID on $(hostname) - "
snapraid_mutt:
  realname: "User Name"
  email: "my-username@gmail.com"
  password: "supersecret"

It is also necessary to handle all the log output it creates. To not have it fill a single file with a million lines after a while, we will use logrotate to only keep a limited amount of old log files. There are only three options you will need to be aware of, and these are their default values:

snapraid_sync_log_dir: "/var/log/snapraid_sync"
snapraid_sync_logrotate_interval: "daily"
snapraid_sync_logrotate_count: 7

Below are a couple of other variables related to this role, and their default values. You probably don't need to edit these.

snapraid_sync_script_dir: "/root/snapraid_sync"
snapraid_muttrc_path: "/root/.muttrc"
snapraid_sync_mail_bin: "/usr/bin/mutt"

Manual Intervention

In the snapraid_sync repository there are more details regarding the thoughts behind "manual intervention", but if you have multiple arrays it might be annoying to always define all the environment variables every time. This role will therefore create "entrypoints" for each array that you define.

These "entrypoints" are nothing more than small bash scripts, with all your array specific variables set, which then call upon the original snapraid_sync.sh script. With this it should therefore be possible for you to run an array specific "force sync" like this:

sudo /{{ snapraid_sync_script_dir }}/snapraid_sync_entrypoint-{{ snapraid_sync.name }}.sh force

e.g.

sudo /root/snapraid_sync/snapraid_sync_entrypoint-array1.sh force

About

Ansible role for building and installing SnapRAID, as well as automating the syncing and srcubbing via cron.

Topics

Resources

License

Stars

Watchers

Forks

Releases

No releases published