PyZMQ: Python bindings for ØMQ

This package contains Python bindings for ØMQ. ØMQ is a lightweight and fast messaging implementation.

Versioning

Current release of pyzmq is 2.2.0, and targets libzmq-2.2.0. For libzmq 2.0.x, use pyzmq release 2.0.10.1 or the 2.0.x development branch.

pyzmq-2.1.11 was the last version of pyzmq to support Python 2.5, and pyzmq 2.2.0 will require Python ≥ 2.6.

PyZMQ versioning follows libzmq versioning. In general, your pyzmq version should be the same as that of your libzmq, but due to the generally growing API of libzmq, your pyzmq should not be newer than your libzmq. This is a strict restriction for pyzmq <= 2.1.0, but we intend to support libzmq >= 2.1.4 (the first 'stable' 2.1 release) for pyzmq 2.1.x.

For a summary of changes to pyzmq, see our changelog.

ØMQ 3.x

As of 2.1.7, we have experimental support for the 3.x API of libzmq, developed at https://github.com/zeromq/libzmq. No code to change, no flags to pass, just build pyzmq against libzmq3 and it should work.

Documentation

See PyZMQ's Sphinx-generated documentation on GitHub for API details, and some notes on Python and Cython development. If you want to learn about using ØMQ in general, the excellect ØMQ Guide is the place to start, which has a Python version of every example.

Downloading

Unless you specifically want to develop PyZMQ, we recommend downloading the PyZMQ source code or MSI installer from our GitHub download page, or an egg from PyPI.

You can also get the latest source code from our GitHub repository, but building from the repository will require that you install Cython version 0.13 or later.

Building and installation

Eggs and MSIs

We have binary installers for various Pythons on OSX and Windows, so you should be able to just easy_install pyzmq in many situations. These eggs include matching libzmq, so they should be the only thing you need to start using pyzmq, but we simply don't have the experience to know when and where these installers will not work.

If a binary installer fails for you, please tell us about your system and the failure, so that we can try to fix it in later releases, and fall back on building from source.

Eggs are on PyPI, and we have them for 'current' Pythons, which are for OSX 10.7:

• Python 2.7, 3.2 (32b+64b intel)

and OSX 10.6:

• Python 2.6 (32b+64b intel)

and Windows (x86 and x64):

• Python 2.7, 3.2

We also have MSI installer packages in our downloads section on GitHub.

A Python 2.6/win64 MSI for 2.1.7 was provided by Craig Austin (craig DOT austin AT gmail DOT com)

Our build scripts are much improved as of 2.1.4, so if you would like to contribute better Windows installers, or have any improvements on existing releases, they would be much appreciated. Simply python setup.py bdist_msi or python setupegg.py bdist_egg should work, once you have libzmq and Python. We simply don't have the VMs or time in which to cover all the bases ourselves.

Note

Sometimes libzmq.so/dll/dylib doesn't get included unless build is specified also, e.g. python setupegg.py build bdist_egg, but this doesn't always seem to be true.

General

To build and install pyzmq from source, you will first need to build libzmq. After you have done this, follow these steps:

Tell pyzmq where libzmq is via the configure subcommand:

$ python setup.py configure --zmq=/path/to/zeromq

or the zmq install directory on OSX/Linux:

$ python setup.py configure --zmq=/usr/local

The argument should be a directory containing lib and include directories, with libzmq and zmq.h respectively. For instance (on Windows), if you have downloaded pyzmq and current libzmq into the same parent directory, this would be:

$ python setup.py configure --zmq=../zeromq-2.2.0

Second, run this command:

$ python setup.py install

Cython is not required to build pyzmq from a release package, but it is required if you want to develop pyzmq, or build directly from our repository on GitHub.

Windows

On Windows, libzmq.dll will be copied into the zmq directory, and installed along with pyzmq, so you shouldn't need to edit your PATH.

It is best to compile both ØMQ and PyØMQ with Microsoft Visual Studio 2008. You should not need to use mingw. If you build libzmq with MSVS 2010, then there will be issues in error handling, because there will be a mismatch between error numbers.

Current testing indicates that running

$ python setup.py bdist_msi

successfully builds a working MSI installer, but we don't have enough Windows deployment experience to know where that may fail.

Windows x64

64b Windows builds have been successful (as of 2.1.7.1), using VC++ 2008 express, and the Windows 7 SDK. VS2008 had to be patched as described here, and pyzmq was built following these instructions on the Cython wiki.

Linux

If you install libzmq to a location other than the default (/usr/local) on Linux, you may need to do one of the following:

• Set LD_LIBRARY_PATH to point to the lib directory of ØMQ.

• Build the extension using the --rpath flag:

  $ python setup.py build_ext --rpath=/opt/zeromq-dev/lib --inplace
  

Mac OSX

The easiest way to install libzmq on OSX is with the wonderful homebrew package manager, via:

$ brew install zeromq

And to build a 32+64b intel fat binary, add --universal:

$ brew install zeromq --universal

This will install libzmq in /usr/local, making pyzmq installable with pip, which doesn't support our binary eggs.

Development

To develop PyZMQ, you will need to install Cython, version 0.13 or greater. After installing Cython, instead of doing python setup.py install do:

$ python setup.py build_ext --inplace
$ python setupegg.py develop

This will build the C extension inplace and then put this directory on your sys.path. With this configuration you only have to run:

$ python setup.py build_ext --inplace

each time you change the .pyx files. To clean the sources, you can do:

$ python setup.py clean

Testing

To run the test suite after installing, just do:

$ python setup.py test

How to release PyZMQ

Currently, we are using the following steps to release PyZMQ:

• Check the version number in version.py.

• Remove old MANIFEST and egg-info files and dist and build directories.

• Check MANIFEST.in.

• Register the release with pypi:

  python setup.py register
  

• Build source distributions and upload:

  python setup.py sdist --formats=zip,gztar upload
  

• Branch the release (do not push the branch):

  git checkout -b 2.1.9 master
  

• commit the changed version.py to the branch:

  git add zmq/core/version.pyx && git commit -m "bump version to 2.1.9"
  

• Tag the release:

  git tag -a -m "Tagging release 2.1.9" v2.1.9
  git push origin --tags
  

• Make sure the README.rst has an updated list of contributors.

• Announce on list.

Authors

This project was started and continues to be led by Brian E. Granger (ellisonbg AT gmail DOT com). Min Ragan-Kelley (benjaminrk AT gmail DOT com) is the primary developer of pyzmq at this time.

The following people have contributed to the project:

• Andrew Gwozdziewycz (git AT apgwoz DOT com)
• Baptiste Lepilleur (baptiste DOT lepilleur AT gmail DOT com)
• Brandon Craig Rhodes (brandon AT rhodesmill DOT org)
• Brandyn A. White (bwhite AT dappervision DOT com)
• Brian E. Granger (ellisonbg AT gmail DOT com)
• Carlos A. Rocha (carlos DOT rocha AT gmail DOT com)
• Daniel Lundin (dln AT spotify DOT com)
• Daniel Truemper (truemped AT googlemail DOT com)
• Erick Tryzelaar (erick DOT tryzelaar AT gmail DOT com)
• Erik Tollerud (erik DOT tollerud AT gmail DOT com)
• Fernando Perez (Fernando DOT Perez AT berkeley DOT edu)
• Frank Wiles (frank AT revsys DOT com)
• Ivo Danihelka (ivo AT danihelka DOT net)
• John Gallagher (johnkgallagher AT gmail DOT com)
• Justin Riley (justin DOT t DOT riley AT gmail DOT com)
• Min Ragan-Kelley (benjaminrk AT gmail DOT com)
• Nicholas Piël (nicholas AT nichol DOT as)
• Ondrej Certik (ondrej AT certik DOT cz)
• Paul Colomiets (paul AT colomiets DOT name)
• Scott Sadler (github AT mashi DOT org)
• Stefan van der Walt (stefan AT sun DOT ac DOT za)
• Thomas Kluyver (takowl AT gmail DOT com)
• Thomas Spura (tomspur AT fedoraproject DOT org)
• Zbigniew Jędrzejewski-Szmek (zbyszek AT in DOT waw DOT pl)
• hugo shi (hugoshi AT bleb2 DOT (none))
• spez (steve AT hipmunk DOT com)

as reported by:

git log --all --format='* %aN (%aE)' | sort -u | sed 's/@/ AT /1' | sed -e 's/\./ DOT /g'

with some adjustments.

Not in git log

• Eugene Chernyshov (chernyshov DOT eugene AT gmail DOT com)
• Douglas Creager (dcreager AT dcreager DOT net)
• Craig Austin (craig DOT austin AT gmail DOT com)

gevent_zeromq, now zmq.green

• Travis Cline (travis DOT cline AT gmail DOT com)
• Ryan Kelly (ryan AT rfk DOT id DOT au)
• Zachary Voase (z AT zacharyvoase DOT com)