nodon SIN-4-1-20, switch operation timeout / error

[git-greatguy]

Hi,

Installed a nodon [SIN-4-1-20] this morning. Pairing with Z2m without problem.
However, cant control switch relay.
Here is what i see so far trying to get it working :

as described in documentation, pushlished mqtt message

zigbee2mqtt/[INT] Resistance Ballon ECS/set
{"state": "OFF"}

timeout reported in z2m

2022-12-21 14:56:01Publish 'set' 'state' to '[INT] Resistance Ballon ECS' failed: 'Error: Command 0x9035eafffed8d50e/242 genOnOff.off({}, {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":false,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Timeout - 62107 - 242 - 17 - 6 - 11 after 10000ms)'

tried to send "genonoff" command through z2m dev console

2022-12-21 14:57:36Publish 'set' 'write' to '[INT] Resistance Ballon ECS' failed: 'Error: Write 0x9035eafffed8d50e/1 genOnOff({"onOff":1}, {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (Status 'READ_ONLY')'

Read only ??

tried, to reset, pair again etc.. cant control through z2m.

FYI, connectivity is good, as i switch manually on / off relay with physical button on module, z
2m get instantly updated value on / off

any idea what's wrong with this zigbbee module ?

[git-greatguy]

ok got it working ! "Answer" was in my first post when timeout refer to endpoind 242.

i stopped z2m and edit database.db

these parts :

change from
"epList":[242,1]
to
"epList":[1,242]

and
"endpoints":{"242":{"profId":41440,"epId":242,"devId":102,
to
"endpoints":{"1":{"profId":41440,"epId":1,"devId":102,

i dont understand what endpoint 242 refer to ?

[euidzero]

Thx a lot. Worked for me too.

[MichaelMure]

How did you even figure that out? Is that a zigbee2mqtt bug?

[MichaelMure]

I just did the first change ([242,1] --> [1,242]) and it worked for me.

[MichaelMure]

#15962

[morcus]

Thank you. I had the same problem with the Adeo (nodon) SIN-4-1-21_EQU module and changing [242,1] to [1,242] fixed the issue.