Skip to content

How to use Logger

armingeiser edited this page Feb 6, 2020 · 18 revisions

The logging system in Kratos has 3 important parts:

  • LoggerMessage a data class storing the message with some attributes like label, category, severity
  • Logger is a singleton object in charge of gathering all messages produced in the code and passing them to the outputs
  • LoggerOutput takes message and write it to the output (or file). This is the extension point of the logger and one can create its output to write only some messages (filtering by category, severity, label, etc.) with custom format.

Sending a Message in C++

The simplest way to send a message is to use predefined macros:

KRATOS_INFO("Some label") << "Some message with value: " << 3.14 << " with more message";

This example sends a message with INFO severity and STATUS category. There are macros for each severity level:

  • KRATOS_WARNING for reporting a warning without interrupting the simulation
  • KRATOS_INFO is the standard level in which minimum level of information should be provided
  • KRATOS_DETAIL is to make more detailed output. All above macros should be used with low frequencies and should be avoided in fine grain parts like elements and conditions.
  • KRATOS_TRACE which will be enabled only in debug mode and will be ignored completely in release modes. This is the most verbose level for debugging only.
  • KRATOS_CHECK_POINTis an special macro which to be used for quality control and regression tests and is enabled only when KRATOS_ENABLE_CHECK_POINT is defined. Providing outputs with CHECKING category to be used in filtering output for regression tests.

Apart from severity each message has a category which can be:

  • STATUS to be used to indicate status of solution like passing some point, if is converged, some steps started or finished, etc.
  • CRITICAL is to indicate an exceptional nature of the message used for errors and warnings.
  • STATISTICS indicates that the message has statistical information like number of iterations, solver residual, mesh quality and so on.
  • PROFILING to be used for timing (not implemented yet)
  • CHECKING is for regression tests and quality control messages.

One can change the category by passing it to the message:

KRATOS_INFO("Number of Iterations") << number_of_iterations << LoggerMessage::Category::STATISTICS;

Note that each logger output can filter the messages by their category and severity and show only the ones it wants. For example an output associated with statistical file can only print the messages with STATISTICS as category.

List of macros

The logger offers several utility macros that allow more fine grain control over when a message needs to be printed. The list of the current available macros is the following:

Default

The standard output, prints the label alongside the message

Variants:

  • KRATOS_INFO("Some Label")
  • KRATOS_WARNING("Some Label")
  • KRATOS_DETAIL("Some Label")
  • KRATOS_TRACE("Some Label")
  • KRATOS_CHECK_POINT("Some Label")

Example:

KRATOS_INFO("Example") << "Hello World." << std::endl;

Output:

Hello World.

IF

Prints the message only if condition is evaluated to true

Variants:

  • KRATOS_INFO_IF("Some Label", condition)
  • KRATOS_WARNING_IF("Some Label", condition)

Example:

for(std::size i = 0; i < 4; i++) {
    KRATOS_INFO_IF("Example", i % 2) << "Iter: " << i << std::endl;
}

Output:

Iter: 1
Iter: 3

ONCE

Prints the message only once

Variants:

  • KRATOS_INFO_ONCE("Some Label")
  • KRATOS_WARNING_ONCE("Some Label")

Example:

for(std::size i = 0; i < 4; i++) {
    KRATOS_INFO_ONCE("Example") << "Iter: " << i << std::endl;
}

Output:

Iter: 0

FIRST_N

Prints the message the first N times

Variants:

  • KRATOS_INFO_FIRST_N("Some Label", count)
  • KRATOS_WARNING_FIRST_N("Some Label", count)

Example:

for(std::size i = 0; i < 4; i++) {
    KRATOS_FIRST_N("Example", 2) << "Iter: " << i << std::endl;
}

Output:

Iter: 0
Iter: 1

Sending a Message in Python

Logger is also has a limited version available. In order to use the logger you must import it with KratosMultihpysics module.

from KratosMultiphysics import Logger
# or
from KratosMultiphysics import *

It has three different print functions you can use: Print, PrintInfo or PrintWarning. All functions have the same syntax and print the message in the default output channel, which is the stdout, in other words your terminal. For PrintInfo and PrintWarning the first argument will always be the label, while for Print you will have to set it using the label named argument. For a message splitted in several arguments, spaces are added automatically between the parts of the message when printing.

Logger.PrintInfo("Message Label", "This", "is", "a message") 
Logger.PrintWarning("Message Label", "This", "is", "a message")
Logger.Print("This", "is", "a", "message", label="Message Label") # Prints a message

You can specify the severity and category of the message by using the severity and category named arguments, similarly to the print function from python. Both PrintInfo and PrintWarning have they severity set to INFO and WARNING and we recommend not to change them. Print function has its channel set to INFO by default but this function is intended for you to change its severity and category.

Category and Severity levels are found in their respective namespaces inside the Logger module:

Logger.PrintWarning("Message Label Warning", "This", "is", "a", "message") # Prints a message in the warning channel
Logger.Print("This", "is", "a", "message", severity=Logger.Severity.WARNING) # Does the same

Finally, you can also interact with the default output and change its Category and Severity but is not possible to change the output itself at the moment:

Logger.GetDefaultOutput().SetSeverity(Logger.Severity.WARNING)
Logger.PrintInfo("Message Label Info", "You won't see this")
Logger.PrintWarning("Message Label Warning", "But you will see this")
Logger.Print("And this", severity=Logger.severity.WARNING, label="Message Label Custom")

Result:

Message Label Warning: But you will see this
Message Label Custom: And this

Writing Log Files

Log Files can easily be created by adding a file logger to the Logging system. An arbitrary number of file loggers can be created and added. Each file logger can be configured individually. The following code shows how a file logger for warnings can be added in python:

import KratosMultiphysics as KM

file_logger = KM.FileLoggerOutput("KratosWarning.log")
file_logger.SetSeverity(KM.Logger.Severity.WARNING)
KM.Logger.AddOutput(file_logger)

Writing a Logger Output

Creating a custom output is relatively easy by deriving a new output class from LoggerOutput class. The following code shows a sample implementation for an output which reports only the warnings in a csv format:

class WarningCSVOutput : public LoggerOutput{
public:
  WarningCSVOutput(std::ostream& rOutputStream) : LoggerOutput(rOutputStream){}

  void WriteMessage(LoggerMessage const& TheMessage) override {
    auto message_severity = TheMessage.GetSeverity();
    if (message_severity == LoggerMessage::Severity::WARNING){
	(*this) << TheMessage.GetLabel() << " , " << TheMessage.GetMessage() << std::endl;
    }
  }
};

To add your output to the Logging system one should use the Logger::AddOutput method:

WarningCSVOutput warning_csv_output(output_file);
Logger::AddOutput(warning_csv_output);

For another example see also the FileLoggerOutput class.

Project information

Getting Started

Tutorials

Developers

Kratos structure

Conventions

Solvers

Debugging, profiling and testing

HOW TOs

Utilities

Kratos API

Kratos Structural Mechanics API

Clone this wiki locally