Dalai

Run LLaMA and Alpaca on your computer.

GitHub Twitter Discord

---

JUST RUN THIS

TO GET

Both alpaca and llama working on your computer!

---

1. Powered by llama.cpp, llama-dl CDN, and alpaca.cpp
2. Hackable web app included
3. Ships with JavaScript API
4. Ships with Socket.io API

---

Intro

1. Cross platform

Dalai runs on all of the following operating systems:

1. Linux
2. Mac
3. Windows

2. Memory Requirements

Runs on most modern computers. Unless your computer is very very old, it should work.

According to a llama.cpp discussion thread, here are the memory requirements:

• 7B => ~4 GB
• 13B => ~8 GB
• 30B => ~16 GB
• 65B => ~32 GB

3. Disk Space Requirements

Alpaca

Currently 7B and 13B models are available via alpaca.cpp

7B

Alpaca comes fully quantized (compressed), and the only space you need for the 7B model is 4.21GB:

13B

Alpaca comes fully quantized (compressed), and the only space you need for the 13B model is 8.14GB:

LLaMA

You need a lot of space for storing the models. The model name must be one of: 7B, 13B, 30B, and 65B.

You do NOT have to install all models, you can install one by one. Let's take a look at how much space each model takes up:

NOTE

The following numbers assume that you DO NOT touch the original model files and keep BOTH the original model files AND the quantized versions.

You can optimize this if you delete the original models (which are much larger) after installation and keep only the quantized versions.

7B

• Full: The model takes up 31.17GB
• Quantized: 4.21GB

13B

• Full: The model takes up 60.21GB
• Quantized: 4.07GB * 2 = 8.14GB

30B

• Full: The model takes up 150.48GB
• Quantized: 5.09GB * 4 = 20.36GB

65B

• Full: The model takes up 432.64GB
• Quantized: 5.11GB * 8 = 40.88GB

---

Quickstart

Mac

Step 1. Install node.js >= 18

If your mac doesn't have node.js installed yet, make sure to install node.js >= 18

Install Node.js

Step 2.1. Install models

Currently supported engines are llama and alpaca.

Add alpaca models

To download alpaca models, you can run:

npx dalai alpaca install 7B

Add llama models

To download llama models, you can run:

npx dalai llama install 7B

or to download multiple models:

npx dalai llama install 7B 13B

Now go to step 3.

Step 2.2. Troubleshoot

Normally you don't need this step, but if running the commands above don't do anything and immediately end, it means something went wrong because some of the required modules are not installed on your system.

In that case, try the following steps:

1. Install homebrew

In case homebrew is not installed on your computer, install it by running:

/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)"

Or you can find the same instruction on the homebrew hompage: https://brew.sh/

2. Install dependencies

Once homebrew is installed, install these dependencies:

brew install cmake
brew install pkg-config

3. Update NPM

Just to make sure we cover every vector, let's update NPM as well:

npm install -g npm@latest

Now go back to step 2.1 and try running the npx dalai commands again.

Step 3. Run Web UI

After everything has been installed, run the following command to launch the web UI server:

npx dalai serve

and open http://localhost:3000 in your browser. Have fun!

---

Windows

Step 1. Install Visual Studio

On windows, you need to install Visual Studio before installing Dalai.

Press the button below to visit the Visual Studio downloads page and download:

Download Microsoft Visual Studio

IMPORTANT!!!

When installing Visual Studio, make sure to check the 3 options as highlighted below:

1. Python development
2. Node.js development
3. Desktop development with C++

---

Step 2.1. Install models

IMPORTANT

On Windows, make sure to run all commands in cmd.

DO NOT run in powershell. Powershell has unnecessarily strict permissions and makes the script fail silently.

Currently supported engines are llama and alpaca.

Install alpaca

To download alpaca models. Open your cmd application and enter:

npx dalai alpaca install 7B

Add llama models

To download llama models. Open your cmd application and enter:

npx dalai llama install 7B

or to download multiple models:

npx dalai llama install 7B 13B

---

Step 2.2. Troubleshoot (optional)

In case above steps fail, try installing Node.js and Python separately.

Install Python:

Download Python

Install Node.js >= 18:

Download Node.js

After both have been installed, open powershell and type python to see if the application exists. And also type node to see if the application exists as well.

Once you've checked that they both exist, try again.

Step 3. Run Web UI

After everything has been installed, run the following command to launch the web UI server (Make sure to run in cmd and not powershell!):

npx dalai serve

and open http://localhost:3000 in your browser. Have fun!

---

Linux

Step 1. Install Dependencies

You need to make sure you have the correct version of Python and Node.js installed.

Step 1.1. Python <= 3.10

Download Python

Make sure the version is 3.10 or lower (not 3.11) Python must be 3.10 or below (pytorch and other libraries are not supported yet on the latest)

Step 1.2. Node.js >= 18

Download node.js

Make sure the version is 18 or higher

---

Step 2.1. Install models

Currently supported engines are llama and alpaca.

Add alpaca models

To download alpaca models, you can run:

npx dalai alpaca install 7B

Add llama models

To download llama models, you can run:

npx dalai llama install 7B

or to download multiple models:

npx dalai llama install 7B 13B

Step 2.2. Troubleshoot

In case the model install silently fails or hangs forever, try the following command, and try running the npx command again:

On ubuntu/debian/etc.:

sudo apt-get install build-essential python3-venv -y

On fedora/etc.:

dnf install make automake gcc gcc-c++ kernel-devel python3-virtualenv -y

Step 3. Run Web UI

After everything has been installed, run the following command to launch the web UI server:

npx dalai serve

and open http://localhost:3000 in your browser. Have fun!

---

API

Dalai is also an NPM package:

1. programmatically install
2. locally make requests to the model
3. run a dalai server (powered by socket.io)
4. programmatically make requests to a remote dalai server (via socket.io)

Dalai is an NPM package. You can install it using:

npm install dalai

---

1. constructor()

Syntax

const dalai = new Dalai(home)

• home: (optional) manually specify the llama.cpp folder

By default, Dalai automatically stores the entire llama.cpp repository under ~/llama.cpp.

However, often you may already have a llama.cpp repository somewhere else on your machine and want to just use that folder. In this case you can pass in the home attribute.

Examples

Basic

Creates a workspace at ~/llama.cpp

const dalai = new Dalai()

Custom path

Manually set the llama.cpp path:

const dalai = new Dalai("/Documents/llama.cpp")

---

2. request()

Syntax

dalai.request(req, callback)

• req: a request object. made up of the following attributes:
  • prompt: (required) The prompt string
  • model: (required) The model type + model name to query. Takes the following form: <model_type>.<model_name>
    • Example: alpaca.7B, llama.13B, ...
  • url: only needed if connecting to a remote dalai server
    • if unspecified, it uses the node.js API to directly run dalai locally
    • if specified (for example ws://localhost:3000) it looks for a socket.io endpoint at the URL and connects to it.
  • threads: The number of threads to use (The default is 8 if unspecified)
  • n_predict: The number of tokens to return (The default is 128 if unspecified)
  • seed: The seed. The default is -1 (none)
  • top_k
  • top_p
  • repeat_last_n
  • repeat_penalty
  • temp: temperature
  • batch_size: batch size
  • skip_end: by default, every session ends with \n\n<end>, which can be used as a marker to know when the full response has returned. However sometimes you may not want this suffix. Set skip_end: true and the response will no longer end with \n\n<end>
• callback: the streaming callback function that gets called every time the client gets any token response back from the model

Examples

1. Node.js

Using node.js, you just need to initialize a Dalai object with new Dalai() and then use it.

const Dalai = require('dalai')
new Dalai().request({
  model: "7B",
  prompt: "The following is a conversation between a boy and a girl:",
}, (token) => {
  process.stdout.write(token)
})

2. Non node.js (socket.io)

To make use of this in a browser or any other language, you can use thie socket.io API.

Step 1. start a server

First you need to run a Dalai socket server:

// server.js
const Dalai = require('dalai')
new Dalai().serve(3000)     // port 3000

Step 2. connect to the server

Then once the server is running, simply make requests to it by passing the ws://localhost:3000 socket url when initializing the Dalai object:

const Dalai = require("dalai")
new Dalai().request({
  url: "ws://localhost:3000",
  model: "7B",
  prompt: "The following is a conversation between a boy and a girl:",
}, (token) => {
  console.log("token", token)
})

---

3. serve()

Syntax

Starts a socket.io server at port

dalai.serve(port)

Examples

const Dalai = require("dalai")
new Dalai().serve(3000)

---

4. http()

Syntax

connect with an existing http instance (The http npm package)

dalai.http(http)

• http: The http object

Examples

This is useful when you're trying to plug dalai into an existing node.js web app

const app = require('express')();
const http = require('http').Server(app);
dalai.http(http)
http.listen(3000, () => {
  console.log("server started")
})

5. install()

Syntax

await dalai.install(model_type, model_name1, model_name2, ...)

• model_type: the name of the model. currently supports:
  • "alpaca"
  • "llama"
• model1, model2, ...: the model names to install ("7B"`, "13B", "30B", "65B", etc)

Examples

Install Llama "7B" and "13B" models:

const Dalai = require("dalai");
const dalai = new Dalai()
await dalai.install("llama", "7B", "13B")

Install alpaca 7B model:

const Dalai = require("dalai");
const dalai = new Dalai()
await dalai.install("alpaca", "7B")

---

6. installed()

returns the array of installed models

Syntax

const models = await dalai.installed()

Examples

const Dalai = require("dalai");
const dalai = new Dalai()
const models = await dalai.installed()
console.log(models)     // prints ["7B", "13B"]

---

FAQ

Using a different home folder

By default Dalai uses your home directory to store the entire repository (~/dalai). However sometimes you may want to store the archive elsewhere.

In this case you can call all CLI methods using the --home flag:

1. Installing models to a custom path

npx dalai llama install 7B --home ~/test_dir

2. Serving from the custom path

npx dalai serve --home ~/test_dir

Updating to the latest

To make sure you update to the latest, first find the latest version at https://www.npmjs.com/package/dalai

Let's say the latest version is 0.3.0. To update the dalai version, run:

npx dalai@0.3.0 setup

Staying up to date

Have questions or feedback? Follow the project through the following outlets:

GitHub Twitter Discord

---