Electron Soundboard

Simple Soundboard with a nice Nord UI

Installation

Building from Source (recommended)

Because the release is not signed, its probably better to build from source. Make sure you have a working git, node and yarn installation. Clone the source code to your machine:

git clone https://github.com/LoredCast/soundboard.git
cd soundboard
yarn install
yarn build
yarn electron-build

Installation files can now be found in the /dist folder.

Download the Installer

If you trust my code and just want an .exe, there is an installer in the realeses section.

---

Once the installation is finished, you'd probably want to add convenient functionality by adding a virtual input Device. This is neccessary because you want others to hear your own beautiful voice while blasting nickelback through Discord.

Virtual Audio for Windows

1. Install Virtual VB Cable either through the release VBCABLE_Driver_Pack.zip or via the official site https://vb-audio.com/Cable/.
2. Follow Steps for the Installer, make sure to run the installer as administor (right click run as administor) and reboot.
3. You're now able to select Virtual Input in the Device selection in the soundboard program.
4. Pipe your microphone through the Virtual Cable as well by going into the sound control panel -> recording -> properties (right click on your mic) -> listen. Now tick Listen to this device and select CABLE Input.
5. Done! Now you can use CABLE Output in any app as device and others can hear your voice and the soundboard at the same time.