Fixes for TFTGLCD Panel, FastIO (#19614)

MarlinFirmware · Oct 16, 2020 · 887e263 · 887e263
1 parent 958f05e
commit 887e263
Show file tree

Hide file tree

Showing 12 changed files with 107 additions and 157 deletions.
diff --git a/Marlin/src/HAL/STM32/fastio.h b/Marlin/src/HAL/STM32/fastio.h
@@ -63,7 +63,7 @@ void FastIO_init(); // Must be called before using fast io macros
 
 #define _GET_MODE(IO)
 #define _SET_MODE(IO,M)         pinMode(IO, M)
-#define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)                               /*!< Output Push Pull Mode & GPIO_NOPULL   */
+#define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)                               //!< Output Push Pull Mode & GPIO_NOPULL
 #define _SET_OUTPUT_OD(IO)      pinMode(IO, OUTPUT_OPEN_DRAIN)
 
 #define WRITE(IO,V)             _WRITE(IO,V)
@@ -73,9 +73,9 @@ void FastIO_init(); // Must be called before using fast io macros
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
 #define OUT_WRITE_OD(IO,V)      do{ _SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
 
-#define SET_INPUT(IO)           _SET_MODE(IO, INPUT)                              /*!< Input Floating Mode                   */
-#define SET_INPUT_PULLUP(IO)    _SET_MODE(IO, INPUT_PULLUP)                       /*!< Input with Pull-up activation         */
-#define SET_INPUT_PULLDOWN(IO)  _SET_MODE(IO, INPUT_PULLDOWN)                     /*!< Input with Pull-down activation       */
+#define SET_INPUT(IO)           _SET_MODE(IO, INPUT)                              //!< Input Floating Mode
+#define SET_INPUT_PULLUP(IO)    _SET_MODE(IO, INPUT_PULLUP)                       //!< Input with Pull-up activation
+#define SET_INPUT_PULLDOWN(IO)  _SET_MODE(IO, INPUT_PULLDOWN)                     //!< Input with Pull-down activation
 #define SET_OUTPUT(IO)          OUT_WRITE(IO, LOW)
 #define SET_PWM(IO)             _SET_MODE(IO, PWM)
 

diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h
@@ -303,7 +303,7 @@
 #define LCD_STR_C STR_C
 #define LCD_STR_E STR_E
 
-#if HAS_MARLINUI_HD44780
+#if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL)
 
   // Custom characters defined in the first 8 characters of the LCD
   #define LCD_STR_BEDTEMP     "\x00" // Print only as a char. This will have 'unexpected' results when used in a string!

diff --git a/Marlin/src/core/utility.h b/Marlin/src/core/utility.h
@@ -71,7 +71,7 @@ class restorer {
   inline void restore() { ref_ = val_; }
 };
 
-#define REMEMBER(N,X,V...) restorer<typeof(X)> restorer_##N(X, ##V)
+#define REMEMBER(N,X,V...) restorer<__typeof__(X)> restorer_##N(X, ##V)
 #define RESTORE(N) restorer_##N.restore()
 
 // Converts from an uint8_t in the range of 0-255 to an uint8_t

diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
@@ -226,9 +226,9 @@
     #define LCD_PROGRESS_BAR
   #endif
   #if ENABLED(TFTGLCD_PANEL_I2C)
-    #define LCD_USE_I2C_BUZZER              // Enable buzzer on LCD for I2C and SPI buses (LiquidTWI2 not required)
     #define LCD_I2C_ADDRESS           0x27  // Must be equal to panel's I2C slave addres
   #endif
+  #define LCD_USE_I2C_BUZZER                // Enable buzzer on LCD, used for both I2C and SPI buses (LiquidTWI2 not required)
   #define STD_ENCODER_PULSES_PER_STEP 2
   #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
   #define LCD_WIDTH                   20    // 20 or 24 chars in line

diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h
@@ -2457,7 +2457,7 @@
 /**
  * Buzzer/Speaker
  */
-#if PIN_EXISTS(BEEPER) || ANY(LCD_USE_I2C_BUZZER, PCA9632_BUZZER, IS_TFTGLCD_PANEL)
+#if PIN_EXISTS(BEEPER) || ANY(LCD_USE_I2C_BUZZER, PCA9632_BUZZER)
   #define HAS_BUZZER 1
   #if PIN_EXISTS(BEEPER)
     #define USE_BEEPER 1