A desktop bot for fun... wobbles around, falls over, blinks and shows the data from the gyro and accelerometer.
- Waveshare Round LCD with RP2040 - https://thepihut.com/products/round-1-28-lcd-display-module-240x240-ips-65k-rgb
- 600mah 1s battery
- Tiny switch
- Tiny button
- 8 x 1mm magnets
You'll need 1.19, not all firmware appears to work, if you have problems try the one included here https://www.waveshare.com/w/upload/9/9d/RP2040-LCD-1.28.zip to test your device. You'll then need download the "Pico with Pimoroni Libraries" via Thonny or https://github.com/pimoroni/pimoroni-pico/releases
All this because I used the ellipse method in framebuf which didn't appear till 1.19. Apparently circles are cutting edge and only just released!
Printed on an Ender 3 Neo v2 with standard settings and PLA filament.
Sanded down and a couple coats of primer, 4 - 5 coats of spray metalic silver paint. Photo really shows up the layer lines, it's much less noticable in real life and has quite a nice gloss finish.
