Error When Building Kernel #8
Comments
|
you need to use clang. Try using vendor/sm8150-perf_defconfig instead of ranchu64 |
desaishivam26
pushed a commit
to desaishivam26/Sleek_OP7
that referenced
this issue
May 24, 2020
Author: @tanish2k09 (email: tanish2k09.dev@gmail.com) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if OnePlusOSS#8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if OnePlusOSS#8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if OnePlusOSS#1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS Signed-off-by: Eliminater74 <eliminater74@gmail.com>
desaishivam26
pushed a commit
to desaishivam26/Sleek_OP7
that referenced
this issue
Jun 3, 2020
Author: @tanish2k09 (email: tanish2k09.dev@gmail.com) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if OnePlusOSS#8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if OnePlusOSS#8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if OnePlusOSS#1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS Signed-off-by: Eliminater74 <eliminater74@gmail.com>
desaishivam26
pushed a commit
to desaishivam26/Sleek_OP7
that referenced
this issue
Jun 11, 2020
Author: @tanish2k09 (email: tanish2k09.dev@gmail.com) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if OnePlusOSS#8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if OnePlusOSS#8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if OnePlusOSS#1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS Signed-off-by: Eliminater74 <eliminater74@gmail.com>
Jackeagle
pushed a commit
to BlissRoms-Devices/android_kernel_oneplus_sm8150
that referenced
this issue
Sep 29, 2020
[ Upstream commit e24c6447ccb7b1a01f9bf0aec94939e6450c0b4d ]
I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:
Direct leak of 28 byte(s) in 4 object(s) allocated from:
#0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
PeterCxy#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
OnePlusOSS#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
OnePlusOSS#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
OnePlusOSS#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
OnePlusOSS#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
OnePlusOSS#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
OnePlusOSS#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
OnePlusOSS#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
OnePlusOSS#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
OnePlusOSS#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
OnePlusOSS#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
OnePlusOSS#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
OnePlusOSS#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
OnePlusOSS#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
OnePlusOSS#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
OnePlusOSS#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
OnePlusOSS#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
OnePlusOSS#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
OnePlusOSS#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
OnePlusOSS#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
OnePlusOSS#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
OnePlusOSS#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
OnePlusOSS#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)
The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.
Free the token variable before calling read_token in order to plug the
leak.
Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
srgrusso
pushed a commit
to BlissRoms-Devices/android_kernel_oneplus_sm8150
that referenced
this issue
Jul 17, 2021
Author: @tanish2k09 (email: tanish2k09.dev@gmail.com) What is it? Kernel-based Lapse ("K-Lapse") is a linear RGB scaling module that 'shifts' RGB based on time (of the day/selected by user), or (since v2.0) brightness. This concept is inspired from LineageOS (formerly known as 'CyanogenMod') ROM's feature "livedisplay" which also changes the display settings (RGB, hue, temperature, etc) based on time. Why did you decide to make this? (Tell me a story). I (personally) am a big fan of the livedisplay feature found on LineageOS ROM. I used it every single day, since Android Lollipop. Starting from Android Nougat, a native night mode solution was added to AOSP and it felt like livedisplay was still way superior, thanks to its various options (you could say it spoiled me, sure). I also maintained a kernel (Venom kernel) for the device I was using at that time. It was all good until the OEM dropped support for the device at Android M, and XDA being XDA, was already working on N ROMs. The issue was, these ROMs weren't LineageOS or based on it, so livedisplay was... gone. I decided I'll try to bring that feature to every other ROM. How would I do that? Of course! The kernel! It worked on every single ROM, it was the key! I started to work on it ASAP and here it is, up on GitHub, licensed under GPL (check klapse.c), open to everyone :) How does it work? Think of it like a fancy night mode, but not really. Klapse is dependent on an RGB interface (like Gamma on MTK and KCAL on SD chipsets). It fetches time from the kernel, converts it to local time, and selects and RGB set based on the time. The result is really smooth shifting of RGB over time. How does it really work (dev)? Klapse mode 1 (time-based scaling) uses a method void klapse_pulse(void) that should ideally be called every minute. This can be done by injecting a pulse call inside another method that is called repeatedly naturally, like cpufreq or atomic or frame commits. It can be anything, whatever you like, even a kthread, as long as it is called repeatedly naturally. To execute every 60 seconds, use jiffies or ktime, or any similar method. The pulse function fetches the current time and makes calculations based on the current hour and the values of the tunables listed down below. Klapse mode 2 (brightness-based scaling) uses a method void set_rgb_slider(<type> bl_lvl) where is the data type of the brightness level used in your kernel source. (OnePlus 6 uses u32 data type for bl_lvl) set_rgb_slider needs to be called/injected inside a function that sets brightness for your device. (OnePlus 6 uses dsi_panel.c for that, check out the diff for that file in /op6) What all stuff can it do? 1, Emulate night mode with the proper RGB settings 2, Smoothly scale from one set of RGB to another set of RGB in integral intervals over time. 3, Reduce perceived brightness using brightness_factor by reducing the amount of color on screen. Allows lower apparent brightness than system permits. 4, Scale RGB based on brightness of display (low brightness usually implies a dark environment, where yellowness is probably useful). 5, Automate the perceived brightness independent of whether klapse is enabled, using its own set of start and stop hours. 6, Be more efficient,faster by residing inside the kernel instead of having to use the HWC HAL like android's night mode. 7, (On older devices) Reduce stuttering or frame lags caused by native night mode. 8, An easier solution against overlay-based apps that run as service in userspace/Android and sometimes block apps asking for permissions. 9, Give you a Livedisplay alternative if it doesn't work in your ROM. 10, Impress your crush so you can get a date (Hey, don't forget to credit me if it works). Alright, so this is a replacement for night mode? NO! Not at all. One can say this is merely an alternative for LineageOS' Livedisplay, but inside a kernel. Night mode is a sub-function of both Livedisplay and KLapse. Most comparisons here were made with night mode because that's what an average user uses, and will relate to the most. There is absolutely no reason for your Android kernel to not have KLapse. Go ahead and add it or ask your kernel maintainer to. It's super-easy! What can it NOT do (yet)? 1, Calculate scaling to the level of minutes, like "Start from 5:37pm till 7:19am". --TODO 2, Make coffee for you. 3, Fly you to the moon. Without a heavy suit. 4, Get you a monthly subscription of free food, cereal included. All these following tunables are found in their respective files in /sys/klapse/ 1. enable_klapse : A switch to enable or disable klapse. Values : 0 = off, 1 = on (since v2.0, 2 = brightness-dependent mode) 2. klapse_start_hour : The hour at which klapse should start scaling the RGB values from daytime to target (see next points). Values : 0-23 3. klapse_stop_hour : The hour by which klapse should scale back the RGB values from target to daytime (see next points). Values : 0-23 4. daytime_rgb : The RGB set that must be used for all the time outside of start and stop hour range. 5. target_rgb : The RGB set that must be scaled towards for all the time inside of start and stop hour range. 6. klapse_scaling_rate : Controls how soon the RGB reaches from daytime to target inside of start and stop hour range. Once target is reached, it remains constant till 30 minutes before stop hour, where target RGB scales back to daytime RGB. 7. brightness_factor : From the name itself, this value has the ability to bend perception and make your display appear as if it is at a lesser brightness level than it actually is at. It works by reducing the RGB values by the same factor. Values : 2-10, (10 means accurate brightness, 5 means 50% of current brightness, you get it) 8. brightness_factor_auto : A switch that allows you to automatically set the brightness factor in a set time range. Value : 0 = off, 1 = on 9. brightness_factor_auto_start_hour : The hour at which brightness_factor should be applied. Works only if OnePlusOSS#8 is 1. Values : 0-23 10. brightness_factor_auto_stop_hour : The hour at which brightness_factor should be reverted to 10. Works only if OnePlusOSS#8 is 1. Values : 0-23 11. backlight_range : The brightness range within which klapse should scale from daytime to target_rgb. Works only if PeterCxy#1 is 2. Values : MIN_BRIGHTNESS-MAX_BRIGHTNESS Signed-off-by: Eliminater74 <eliminater74@gmail.com>
srgrusso
pushed a commit
to BlissRoms-Devices/android_kernel_oneplus_sm8150
that referenced
this issue
Oct 14, 2021
It was reported by Sergey Senozhatsky that if THP (Transparent Huge Page) and frontswap (via zswap) are both enabled, when memory goes low so that swap is triggered, segfault and memory corruption will occur in random user space applications as follow, kernel: urxvt[338]: segfault at 20 ip 00007fc08889ae0d sp 00007ffc73a7fc40 error 6 in libc-2.26.so[7fc08881a000+1ae000] #0 0x00007fc08889ae0d _int_malloc (libc.so.6) PeterCxy#1 0x00007fc08889c2f3 malloc (libc.so.6) OnePlusOSS#2 0x0000560e6004bff7 _Z14rxvt_wcstoutf8PKwi (urxvt) OnePlusOSS#3 0x0000560e6005e75c n/a (urxvt) OnePlusOSS#4 0x0000560e6007d9f1 _ZN16rxvt_perl_interp6invokeEP9rxvt_term9hook_typez (urxvt) OnePlusOSS#5 0x0000560e6003d988 _ZN9rxvt_term9cmd_parseEv (urxvt) OnePlusOSS#6 0x0000560e60042804 _ZN9rxvt_term6pty_cbERN2ev2ioEi (urxvt) OnePlusOSS#7 0x0000560e6005c10f _Z17ev_invoke_pendingv (urxvt) OnePlusOSS#8 0x0000560e6005cb55 ev_run (urxvt) OnePlusOSS#9 0x0000560e6003b9b9 main (urxvt) OnePlusOSS#10 0x00007fc08883af4a __libc_start_main (libc.so.6) OnePlusOSS#11 0x0000560e6003f9da _start (urxvt) After bisection, it was found the first bad commit is bd4c82c ("mm, THP, swap: delay splitting THP after swapped out"). The root cause is as follows: When the pages are written to swap device during swapping out in swap_writepage(), zswap (fontswap) is tried to compress the pages to improve performance. But zswap (frontswap) will treat THP as a normal page, so only the head page is saved. After swapping in, tail pages will not be restored to their original contents, causing memory corruption in the applications. This is fixed by refusing to save page in the frontswap store functions if the page is a THP. So that the THP will be swapped out to swap device. Another choice is to split THP if frontswap is enabled. But it is found that the frontswap enabling isn't flexible. For example, if CONFIG_ZSWAP=y (cannot be module), frontswap will be enabled even if zswap itself isn't enabled. Frontswap has multiple backends, to make it easy for one backend to enable THP support, the THP checking is put in backend frontswap store functions instead of the general interfaces. Link: http://lkml.kernel.org/r/20180209084947.22749-1-ying.huang@intel.com Fixes: bd4c82c ("mm, THP, swap: delay splitting THP after swapped out") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Suggested-by: Minchan Kim <minchan@kernel.org> [put THP checking in backend] Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Dan Streetman <ddstreet@ieee.org> Cc: Seth Jennings <sjenning@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Shaohua Li <shli@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Shakeel Butt <shakeelb@google.com> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> [4.14] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: alk3pInjection <webmaster@raspii.tech>
srgrusso
pushed a commit
to BlissRoms-Devices/android_kernel_oneplus_sm8150
that referenced
this issue
Oct 14, 2021
…nces commit ecfbd7b9054bddb12cea07fda41bb3a79a7b0149 upstream. FunctionFS device structure 'struct ffs_dev' and driver data structure 'struct ffs_data' are bound to each other with cross-reference pointers 'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one is supposed to be valid through the whole life of 'struct ffs_data' (and while 'struct ffs_dev' exists non-freed), the second one is cleared in 'ffs_closed()' (called from 'ffs_data_reset()' or the last 'ffs_data_put()'). This can be called several times, alternating in different order with 'ffs_free_inst()', that, if possible, clears the other cross-reference. As a result, different cases of these calls order may leave stale cross-reference pointers, used when the pointed structure is already freed. Even if it occasionally doesn't cause kernel crash, this error is reported by KASAN-enabled kernel configuration. For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was fixed by commit cdafb6d ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst"). The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()'] now causes KASAN reported error [1], when 'ffs_data_reset()' clears 'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev', but can't clear 'ffs_data->private_data', which is then accessed in 'ffs_closed()' called from 'ffs_data_put()'. This happens since 'ffs_dev->ffs_data' reference is cleared too early. Moreover, one more use case, when 'ffs_free_inst()' is called immediately after mounting FunctionFS device (that is before the descriptors are written and 'ffs_ready()' is called), and then 'ffs_data_reset()' or 'ffs_data_put()' is called from accessing "ep0" file or unmounting the device. This causes KASAN error report like [2], since 'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly clear 'ffs_data->private_data', that is later accessed to freed structure. Fix these (and may be other) cases of stale pointers access by moving setting and clearing of the mentioned cross-references to the single places, setting both of them when 'struct ffs_data' is created and bound to 'struct ffs_dev', and clearing both of them when one of the structures is destroyed. It seems convenient to make this pointer initialization and structures binding in 'ffs_acquire_dev()' and make pointers clearing in 'ffs_release_dev()'. This required some changes in these functions parameters and return types. Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()' is called without unmounting the device, and "release_dev" callback is not called at all, or (2) "release_dev" callback is called before "ffs_closed" callback on unmounting, which seems to be not correctly nested with "acquire_dev" and "ffs_ready" callbacks. Make this cleanup togther with other mentioned 'ffs_release_dev()' changes. [1] ================================================================== root@rcar-gen3:~# mkdir /dev/cfs root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 64.340664] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# cd /dev/ffs root@rcar-gen3:/dev/ffs# /home/root/ffs-test ffs-test: info: ep0: writing descriptors (in v2 format) [ 83.181442] read descriptors [ 83.186085] read strings ffs-test: info: ep0: writing strings ffs-test: dbg: ep1: starting ffs-test: dbg: ep2: starting ffs-test: info: ep1: starts ffs-test: info: ep2: starts ffs-test: info: ep0: starts ^C root@rcar-gen3:/dev/ffs# cd /home/root/ root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 98.935061] unloading root@rcar-gen3:~# umount /dev/ffs [ 102.734301] ================================================================== [ 102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997 [ 102.756709] [ 102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ OnePlusOSS#8 [ 102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 102.772179] Call trace: [ 102.774779] dump_backtrace+0x0/0x330 [ 102.778653] show_stack+0x20/0x2c [ 102.782152] dump_stack+0x11c/0x1ac [ 102.785833] print_address_description.constprop.0+0x30/0x274 [ 102.791862] kasan_report+0x14c/0x1c8 [ 102.795719] __asan_report_store1_noabort+0x34/0x58 [ 102.800840] ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.805801] ffs_fs_kill_sb+0x50/0x84 [usb_f_fs] [ 102.810663] deactivate_locked_super+0xa0/0xf0 [ 102.815339] deactivate_super+0x98/0xac [ 102.819378] cleanup_mnt+0xd0/0x1b0 [ 102.823057] __cleanup_mnt+0x1c/0x28 [ 102.826823] task_work_run+0x104/0x180 [ 102.830774] do_notify_resume+0x458/0x14e0 [ 102.835083] work_pending+0xc/0x5f8 [ 102.838762] [ 102.840357] Allocated by task 2988: [ 102.844032] kasan_save_stack+0x28/0x58 [ 102.848071] kasan_set_track+0x28/0x3c [ 102.852016] ____kasan_kmalloc+0x84/0x9c [ 102.856142] __kasan_kmalloc+0x10/0x1c [ 102.860088] __kmalloc+0x214/0x2f8 [ 102.863678] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 102.868990] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 102.873942] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 102.880629] usb_get_function_instance+0x64/0x68 [libcomposite] [ 102.886858] function_make+0x128/0x1ec [libcomposite] [ 102.892185] configfs_mkdir+0x330/0x590 [configfs] [ 102.897245] vfs_mkdir+0x12c/0x1bc [ 102.900835] do_mkdirat+0x180/0x1d0 [ 102.904513] __arm64_sys_mkdirat+0x80/0x94 [ 102.908822] invoke_syscall+0xf8/0x25c [ 102.912772] el0_svc_common.constprop.0+0x150/0x1a0 [ 102.917891] do_el0_svc+0xa0/0xd4 [ 102.921386] el0_svc+0x24/0x34 [ 102.924613] el0_sync_handler+0xcc/0x154 [ 102.928743] el0_sync+0x198/0x1c0 [ 102.932238] [ 102.933832] Freed by task 2996: [ 102.937144] kasan_save_stack+0x28/0x58 [ 102.941181] kasan_set_track+0x28/0x3c [ 102.945128] kasan_set_free_info+0x28/0x4c [ 102.949435] ____kasan_slab_free+0x104/0x118 [ 102.953921] __kasan_slab_free+0x18/0x24 [ 102.958047] slab_free_freelist_hook+0x148/0x1f0 [ 102.962897] kfree+0x318/0x440 [ 102.966123] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 102.971075] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 102.977302] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 102.982344] config_item_put+0x140/0x1a4 [configfs] [ 102.987486] configfs_rmdir+0x3fc/0x518 [configfs] [ 102.992535] vfs_rmdir+0x114/0x234 [ 102.996122] do_rmdir+0x274/0x2b0 [ 102.999617] __arm64_sys_unlinkat+0x94/0xc8 [ 103.004015] invoke_syscall+0xf8/0x25c [ 103.007961] el0_svc_common.constprop.0+0x150/0x1a0 [ 103.013080] do_el0_svc+0xa0/0xd4 [ 103.016575] el0_svc+0x24/0x34 [ 103.019801] el0_sync_handler+0xcc/0x154 [ 103.023930] el0_sync+0x198/0x1c0 [ 103.027426] [ 103.029020] The buggy address belongs to the object at ffff0004d46ff500 [ 103.029020] which belongs to the cache kmalloc-128 of size 128 [ 103.042079] The buggy address is located 73 bytes inside of [ 103.042079] 128-byte region [ffff0004d46ff500, ffff0004d46ff580) [ 103.054236] The buggy address belongs to the page: [ 103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe [ 103.070437] head:0000000021aa849b order:1 compound_mapcount:0 [ 103.076456] flags: 0x8000000000010200(slab|head|zone=2) [ 103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300 [ 103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000 [ 103.098150] page dumped because: kasan: bad access detected [ 103.103985] [ 103.105578] Memory state around the buggy address: [ 103.110602] ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.118161] ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.133284] ^ [ 103.139120] ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.146679] ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.154238] ================================================================== [ 103.161792] Disabling lock debugging due to kernel taint [ 103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e [ 103.175406] Mem abort info: [ 103.178457] ESR = 0x96000004 [ 103.181609] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.187020] SET = 0, FnV = 0 [ 103.190185] EA = 0, S1PTW = 0 [ 103.193417] Data abort info: [ 103.196385] ISV = 0, ISS = 0x00000004 [ 103.200315] CM = 0, WnR = 0 [ 103.203366] [0037801d6000018e] address between user and kernel address ranges [ 103.210611] Internal error: Oops: 96000004 [PeterCxy#1] PREEMPT SMP [ 103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4 [ 103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G B 5.13.0-rc4+ OnePlusOSS#8 [ 103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 103.290385] sp : ffff800014777a80 [ 103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000 [ 103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4 [ 103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0 [ 103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000 [ 103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658 [ 103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648 [ 103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000 [ 103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001 [ 103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70 [ 103.365766] Call trace: [ 103.368235] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.373076] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 103.377829] ffs_data_closed+0x1ec/0x244 [usb_f_fs] [ 103.382755] ffs_fs_kill_sb+0x70/0x84 [usb_f_fs] [ 103.387420] deactivate_locked_super+0xa0/0xf0 [ 103.391905] deactivate_super+0x98/0xac [ 103.395776] cleanup_mnt+0xd0/0x1b0 [ 103.399299] __cleanup_mnt+0x1c/0x28 [ 103.402906] task_work_run+0x104/0x180 [ 103.406691] do_notify_resume+0x458/0x14e0 [ 103.410823] work_pending+0xc/0x5f8 [ 103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 103.420490] ---[ end trace 57b43a50e8244f57 ]--- Segmentation fault root@rcar-gen3:~# ================================================================== [2] ================================================================== root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 54.766480] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 63.197597] unloading root@rcar-gen3:~# cat /dev/ffs/ep0 cat: read error:[ 67.213506] ================================================================== [ 67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994 [ 67.236446] [ 67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ OnePlusOSS#8 [ 67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.251624] Call trace: [ 67.254212] dump_backtrace+0x0/0x330 [ 67.258081] show_stack+0x20/0x2c [ 67.261579] dump_stack+0x11c/0x1ac [ 67.265260] print_address_description.constprop.0+0x30/0x274 [ 67.271286] kasan_report+0x14c/0x1c8 [ 67.275143] __asan_report_store1_noabort+0x34/0x58 [ 67.280265] ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.285220] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.290172] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.295305] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.300256] __fput+0x304/0x580 [ 67.303576] ____fput+0x18/0x24 [ 67.306893] task_work_run+0x104/0x180 [ 67.310846] do_notify_resume+0x458/0x14e0 [ 67.315154] work_pending+0xc/0x5f8 [ 67.318834] [ 67.320429] Allocated by task 2988: [ 67.324105] kasan_save_stack+0x28/0x58 [ 67.328144] kasan_set_track+0x28/0x3c [ 67.332090] ____kasan_kmalloc+0x84/0x9c [ 67.336217] __kasan_kmalloc+0x10/0x1c [ 67.340163] __kmalloc+0x214/0x2f8 [ 67.343754] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 67.349066] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 67.354017] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 67.360705] usb_get_function_instance+0x64/0x68 [libcomposite] [ 67.366934] function_make+0x128/0x1ec [libcomposite] [ 67.372260] configfs_mkdir+0x330/0x590 [configfs] [ 67.377320] vfs_mkdir+0x12c/0x1bc [ 67.380911] do_mkdirat+0x180/0x1d0 [ 67.384589] __arm64_sys_mkdirat+0x80/0x94 [ 67.388899] invoke_syscall+0xf8/0x25c [ 67.392850] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.397969] do_el0_svc+0xa0/0xd4 [ 67.401464] el0_svc+0x24/0x34 [ 67.404691] el0_sync_handler+0xcc/0x154 [ 67.408819] el0_sync+0x198/0x1c0 [ 67.412315] [ 67.413909] Freed by task 2993: [ 67.417220] kasan_save_stack+0x28/0x58 [ 67.421257] kasan_set_track+0x28/0x3c [ 67.425204] kasan_set_free_info+0x28/0x4c [ 67.429513] ____kasan_slab_free+0x104/0x118 [ 67.434001] __kasan_slab_free+0x18/0x24 [ 67.438128] slab_free_freelist_hook+0x148/0x1f0 [ 67.442978] kfree+0x318/0x440 [ 67.446205] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 67.451156] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 67.457385] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 67.462428] config_item_put+0x140/0x1a4 [configfs] [ 67.467570] configfs_rmdir+0x3fc/0x518 [configfs] [ 67.472626] vfs_rmdir+0x114/0x234 [ 67.476215] do_rmdir+0x274/0x2b0 [ 67.479710] __arm64_sys_unlinkat+0x94/0xc8 [ 67.484108] invoke_syscall+0xf8/0x25c [ 67.488055] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.493175] do_el0_svc+0xa0/0xd4 [ 67.496671] el0_svc+0x24/0x34 [ 67.499896] el0_sync_handler+0xcc/0x154 [ 67.504024] el0_sync+0x198/0x1c0 [ 67.507520] [ 67.509114] The buggy address belongs to the object at ffff0004c26e9700 [ 67.509114] which belongs to the cache kmalloc-128 of size 128 [ 67.522171] The buggy address is located 74 bytes inside of [ 67.522171] 128-byte region [ffff0004c26e9700, ffff0004c26e9780) [ 67.534328] The buggy address belongs to the page: [ 67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8 [ 67.549175] head:000000003177a217 order:1 compound_mapcount:0 [ 67.555195] flags: 0x8000000000010200(slab|head|zone=2) [ 67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300 [ 67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 67.576890] page dumped because: kasan: bad access detected [ 67.582725] [ 67.584318] Memory state around the buggy address: [ 67.589343] ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.596903] ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.612022] ^ [ 67.617860] ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.625421] ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.632981] ================================================================== [ 67.640535] Disabling lock debugging due to kernel taint File descriptor[ 67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d in bad state [ 67.655456] Mem abort info: [ 67.659619] ESR = 0x96000004 [ 67.662801] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.668225] SET = 0, FnV = 0 [ 67.671375] EA = 0, S1PTW = 0 [ 67.674613] Data abort info: [ 67.677587] ISV = 0, ISS = 0x00000004 [ 67.681522] CM = 0, WnR = 0 [ 67.684588] [fabb801d4000018d] address between user and kernel address ranges [ 67.691849] Internal error: Oops: 96000004 [PeterCxy#1] PREEMPT SMP [ 67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4 [ 67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G B 5.13.0-rc4+ OnePlusOSS#8 [ 67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 67.771365] sp : ffff800014767ad0 [ 67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0 [ 67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d [ 67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0 [ 67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000 [ 67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa [ 67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014 [ 67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000 [ 67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001 [ 67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d [ 67.846748] Call trace: [ 67.849218] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.854058] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.858810] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.863736] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.868488] __fput+0x304/0x580 [ 67.871665] ____fput+0x18/0x24 [ 67.874837] task_work_run+0x104/0x180 [ 67.878622] do_notify_resume+0x458/0x14e0 [ 67.882754] work_pending+0xc/0x5f8 [ 67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 67.892422] ---[ end trace 6d7cedf53d7abbea ]--- Segmentation fault root@rcar-gen3:~# ================================================================== Fixes: 4b187fc ("usb: gadget: FunctionFS: add devices management code") Fixes: 3262ad8 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference") Fixes: cdafb6d ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst") Reported-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20210603171507.22514-1-andrew_gabbasov@mentor.com [agabbasov: Backported to earlier mount API, resolved context conflicts] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Nov 21, 2021
commit 1f3e2e97c003f80c4b087092b225c8787ff91e4d upstream. The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ OnePlusOSS#8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Nov 21, 2021
https://bugzilla.kernel.org/show_bug.cgi?id=208565 PID: 257 TASK: ecdd0000 CPU: 0 COMMAND: "init" #0 [<c0b420ec>] (__schedule) from [<c0b423c8>] PeterCxy#1 [<c0b423c8>] (schedule) from [<c0b459d4>] OnePlusOSS#2 [<c0b459d4>] (rwsem_down_read_failed) from [<c0b44fa0>] OnePlusOSS#3 [<c0b44fa0>] (down_read) from [<c044233c>] OnePlusOSS#4 [<c044233c>] (f2fs_truncate_blocks) from [<c0442890>] OnePlusOSS#5 [<c0442890>] (f2fs_truncate) from [<c044d408>] OnePlusOSS#6 [<c044d408>] (f2fs_evict_inode) from [<c030be18>] OnePlusOSS#7 [<c030be18>] (evict) from [<c030a558>] OnePlusOSS#8 [<c030a558>] (iput) from [<c047c600>] OnePlusOSS#9 [<c047c600>] (f2fs_sync_node_pages) from [<c0465414>] OnePlusOSS#10 [<c0465414>] (f2fs_write_checkpoint) from [<c04575f4>] OnePlusOSS#11 [<c04575f4>] (f2fs_sync_fs) from [<c0441918>] OnePlusOSS#12 [<c0441918>] (f2fs_do_sync_file) from [<c0441098>] OnePlusOSS#13 [<c0441098>] (f2fs_sync_file) from [<c0323fa0>] OnePlusOSS#14 [<c0323fa0>] (vfs_fsync_range) from [<c0324294>] OnePlusOSS#15 [<c0324294>] (do_fsync) from [<c0324014>] OnePlusOSS#16 [<c0324014>] (sys_fsync) from [<c0108bc0>] This can be caused by flush_dirty_inode() in f2fs_sync_node_pages() where iput() requires f2fs_lock_op() again resulting in livelock. Reported-by: Zhiguo Niu <Zhiguo.Niu@unisoc.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Nov 21, 2021
This patch is to fix a crash: OnePlusOSS#3 [ffffb6580689f898] oops_end at ffffffffa2835bc2 OnePlusOSS#4 [ffffb6580689f8b8] no_context at ffffffffa28766e7 OnePlusOSS#5 [ffffb6580689f920] async_page_fault at ffffffffa320135e [exception RIP: f2fs_is_compressed_page+34] RIP: ffffffffa2ba83a2 RSP: ffffb6580689f9d8 RFLAGS: 00010213 RAX: 0000000000000001 RBX: fffffc0f50b34bc0 RCX: 0000000000002122 RDX: 0000000000002123 RSI: 0000000000000c00 RDI: fffffc0f50b34bc0 RBP: ffff97e815a40178 R8: 0000000000000000 R9: ffff97e83ffc9000 R10: 0000000000032300 R11: 0000000000032380 R12: ffffb6580689fa38 R13: fffffc0f50b34bc0 R14: ffff97e825cbd000 R15: 0000000000000c00 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 OnePlusOSS#6 [ffffb6580689f9d8] __is_cp_guaranteed at ffffffffa2b7ea98 OnePlusOSS#7 [ffffb6580689f9f0] f2fs_submit_page_write at ffffffffa2b81a69 OnePlusOSS#8 [ffffb6580689fa30] f2fs_do_write_meta_page at ffffffffa2b99777 OnePlusOSS#9 [ffffb6580689fae0] __f2fs_write_meta_page at ffffffffa2b75f1a OnePlusOSS#10 [ffffb6580689fb18] f2fs_sync_meta_pages at ffffffffa2b77466 OnePlusOSS#11 [ffffb6580689fc98] do_checkpoint at ffffffffa2b78e46 OnePlusOSS#12 [ffffb6580689fd88] f2fs_write_checkpoint at ffffffffa2b79c29 OnePlusOSS#13 [ffffb6580689fdd0] f2fs_sync_fs at ffffffffa2b69d95 OnePlusOSS#14 [ffffb6580689fe20] sync_filesystem at ffffffffa2ad2574 OnePlusOSS#15 [ffffb6580689fe30] generic_shutdown_super at ffffffffa2a9b582 OnePlusOSS#16 [ffffb6580689fe48] kill_block_super at ffffffffa2a9b6d1 OnePlusOSS#17 [ffffb6580689fe60] kill_f2fs_super at ffffffffa2b6abe1 OnePlusOSS#18 [ffffb6580689fea0] deactivate_locked_super at ffffffffa2a9afb6 OnePlusOSS#19 [ffffb6580689feb8] cleanup_mnt at ffffffffa2abcad4 OnePlusOSS#20 [ffffb6580689fee0] task_work_run at ffffffffa28bca28 OnePlusOSS#21 [ffffb6580689ff00] exit_to_usermode_loop at ffffffffa28050b7 OnePlusOSS#22 [ffffb6580689ff38] do_syscall_64 at ffffffffa280560e OnePlusOSS#23 [ffffb6580689ff50] entry_SYSCALL_64_after_hwframe at ffffffffa320008c This occurred when umount f2fs if enable F2FS_FS_COMPRESSION with F2FS_IO_TRACE. Fixes it by adding IS_IO_TRACED_PAGE to check validity of pid for page_private. Signed-off-by: Yu Changchun <yuchangchun1@huawei.com> Reviewed-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Feb 6, 2022
commit 43bb40c5b92659966bdf4bfe584fde0a3575a049 upstream. When a virtio pci device undergo surprise removal (aka async removal in PCIe spec), mark the device as broken so that any upper layer drivers can abort any outstanding operation. When a virtio net pci device undergo surprise removal which is used by a NetworkManager, a below call trace was observed. kernel:watchdog: BUG: soft lockup - CPU#1 stuck for 26s! [kworker/1:1:27059] watchdog: BUG: soft lockup - CPU#1 stuck for 52s! [kworker/1:1:27059] CPU: 1 PID: 27059 Comm: kworker/1:1 Tainted: G S W I L 5.13.0-hotplug+ OnePlusOSS#8 Hardware name: Dell Inc. PowerEdge R640/0H28RR, BIOS 2.9.4 11/06/2020 Workqueue: events linkwatch_event RIP: 0010:virtnet_send_command+0xfc/0x150 [virtio_net] Call Trace: virtnet_set_rx_mode+0xcf/0x2a7 [virtio_net] ? __hw_addr_create_ex+0x85/0xc0 __dev_mc_add+0x72/0x80 igmp6_group_added+0xa7/0xd0 ipv6_mc_up+0x3c/0x60 ipv6_find_idev+0x36/0x80 addrconf_add_dev+0x1e/0xa0 addrconf_dev_config+0x71/0x130 addrconf_notify+0x1f5/0xb40 ? rtnl_is_locked+0x11/0x20 ? __switch_to_asm+0x42/0x70 ? finish_task_switch+0xaf/0x2c0 ? raw_notifier_call_chain+0x3e/0x50 raw_notifier_call_chain+0x3e/0x50 netdev_state_change+0x67/0x90 linkwatch_do_dev+0x3c/0x50 __linkwatch_run_queue+0xd2/0x220 linkwatch_event+0x21/0x30 process_one_work+0x1c8/0x370 worker_thread+0x30/0x380 ? process_one_work+0x370/0x370 kthread+0x118/0x140 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Hence, add the ability to abort the command on surprise removal which prevents infinite loop and system lockup. Signed-off-by: Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210721142648.1525924-5-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Yang Wei <yang.wei@linux.alibaba.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Feb 6, 2022
[ Upstream commit c1833c3964d5bd8c163bd4e01736a38bc473cb8a ] The "__ip6_tnl_parm" struct was left uninitialized causing an invalid load of random data when the "__ip6_tnl_parm" struct was used elsewhere. As an example, in the function "ip6_tnl_xmit_ctl()", it tries to access the "collect_md" member. With "__ip6_tnl_parm" being uninitialized and containing random data, the UBSAN detected that "collect_md" held a non-boolean value. The UBSAN issue is as follows: =============================================================== UBSAN: invalid-load in net/ipv6/ip6_tunnel.c:1025:14 load of value 30 is not a valid value for type '_Bool' CPU: 1 PID: 228 Comm: kworker/1:3 Not tainted 5.16.0-rc4+ OnePlusOSS#8 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Workqueue: ipv6_addrconf addrconf_dad_work Call Trace: <TASK> dump_stack_lvl+0x44/0x57 ubsan_epilogue+0x5/0x40 __ubsan_handle_load_invalid_value+0x66/0x70 ? __cpuhp_setup_state+0x1d3/0x210 ip6_tnl_xmit_ctl.cold.52+0x2c/0x6f [ip6_tunnel] vti6_tnl_xmit+0x79c/0x1e96 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? vti6_rcv+0x100/0x100 [ip6_vti] ? lock_is_held_type+0xd9/0x130 ? rcu_read_lock_bh_held+0xc0/0xc0 ? lock_acquired+0x262/0xb10 dev_hard_start_xmit+0x1e6/0x820 __dev_queue_xmit+0x2079/0x3340 ? mark_lock.part.52+0xf7/0x1050 ? netdev_core_pick_tx+0x290/0x290 ? kvm_clock_read+0x14/0x30 ? kvm_sched_clock_read+0x5/0x10 ? sched_clock_cpu+0x15/0x200 ? find_held_lock+0x3a/0x1c0 ? lock_release+0x42f/0xc90 ? lock_downgrade+0x6b0/0x6b0 ? mark_held_locks+0xb7/0x120 ? neigh_connected_output+0x31f/0x470 ? lockdep_hardirqs_on+0x79/0x100 ? neigh_connected_output+0x31f/0x470 ? ip6_finish_output2+0x9b0/0x1d90 ? rcu_read_lock_bh_held+0x62/0xc0 ? ip6_finish_output2+0x9b0/0x1d90 ip6_finish_output2+0x9b0/0x1d90 ? ip6_append_data+0x330/0x330 ? ip6_mtu+0x166/0x370 ? __ip6_finish_output+0x1ad/0xfb0 ? nf_hook_slow+0xa6/0x170 ip6_output+0x1fb/0x710 ? nf_hook.constprop.32+0x317/0x430 ? ip6_finish_output+0x180/0x180 ? __ip6_finish_output+0xfb0/0xfb0 ? lock_is_held_type+0xd9/0x130 ndisc_send_skb+0xb33/0x1590 ? __sk_mem_raise_allocated+0x11cf/0x1560 ? dst_output+0x4a0/0x4a0 ? ndisc_send_rs+0x432/0x610 addrconf_dad_completed+0x30c/0xbb0 ? addrconf_rs_timer+0x650/0x650 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 ? addrconf_dad_completed+0xbb0/0xbb0 ? rcu_read_lock_sched_held+0xaf/0xe0 ? rcu_read_lock_bh_held+0xc0/0xc0 process_one_work+0x97b/0x1740 ? pwq_dec_nr_in_flight+0x270/0x270 worker_thread+0x87/0xbf0 ? process_one_work+0x1740/0x1740 kthread+0x3ac/0x490 ? set_kthread_struct+0x100/0x100 ret_from_fork+0x22/0x30 </TASK> =============================================================== The solution is to initialize "__ip6_tnl_parm" struct to zeros in the "vti6_siocdevprivate()" function. Signed-off-by: William Zhao <wizhao@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Jul 17, 2022
[ Upstream commit af68656d66eda219b7f55ce8313a1da0312c79e1 ]
While handling PCI errors (AER flow) driver tries to
disable NAPI [napi_disable()] after NAPI is deleted
[__netif_napi_del()] which causes unexpected system
hang/crash.
System message log shows the following:
=======================================
[ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures.
[ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)'
[ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports:
'need reset'
[ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking
bnx2x->error_detected(IO frozen)
[ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports:
'need reset'
[ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset'
[ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow:
[ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows:
[ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow:
[ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows:
[ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset'
[ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking
bnx2x->slot_reset()
[ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing...
[ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset
--> driver unload
Uninterruptible tasks
=====================
crash> ps | grep UN
213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd]
215 2 0 c000000004c80000 UN 0.0 0 0
[kworker/0:2]
2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd
4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty
4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty
32423 2 26 c00000020038c580 UN 0.0 0 0
[kworker/26:3]
32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd
32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail
33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail
33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup
33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd
33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail
33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd
EEH handler hung while bnx2x sleeping and holding RTNL lock
===========================================================
crash> bt 213
PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd"
#0 [c000000004d477e0] __schedule at c000000000c70808
PeterCxy#1 [c000000004d478b0] schedule at c000000000c70ee0
OnePlusOSS#2 [c000000004d478e0] schedule_timeout at c000000000c76dec
OnePlusOSS#3 [c000000004d479c0] msleep at c0000000002120cc
OnePlusOSS#4 [c000000004d479f0] napi_disable at c000000000a06448
^^^^^^^^^^^^^^^^
OnePlusOSS#5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x]
OnePlusOSS#6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x]
OnePlusOSS#7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc
OnePlusOSS#8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8
OnePlusOSS#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64
And the sleeping source code
============================
crash> dis -ls c000000000a06448
FILE: ../net/core/dev.c
LINE: 6702
6697 {
6698 might_sleep();
6699 set_bit(NAPI_STATE_DISABLE, &n->state);
6700
6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state))
* 6702 msleep(1);
6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state))
6704 msleep(1);
6705
6706 hrtimer_cancel(&n->timer);
6707
6708 clear_bit(NAPI_STATE_DISABLE, &n->state);
6709 }
EEH calls into bnx2x twice based on the system log above, first through
bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes
the following call chains:
bnx2x_io_error_detected()
+-> bnx2x_eeh_nic_unload()
+-> bnx2x_del_all_napi()
+-> __netif_napi_del()
bnx2x_io_slot_reset()
+-> bnx2x_netif_stop()
+-> bnx2x_napi_disable()
+->napi_disable()
Fix this by correcting the sequence of NAPI APIs usage,
that is delete the NAPI after disabling it.
Fixes: 7fa6f34 ("bnx2x: AER revised")
Reported-by: David Christensen <drc@linux.vnet.ibm.com>
Tested-by: David Christensen <drc@linux.vnet.ibm.com>
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Jul 17, 2022
[ Upstream commit ed6bc6bf0a7d75e80eb1df883c09975ebb74e590 ]
If CONFIG_M54xx=y, CONFIG_MMU=y, and CONFIG_M68KFPU_EMU=y:
{standard input}:272: Error: invalid instruction for this architecture; needs 68000 or higher (68000 [68ec000, 68hc000, 68hc001, 68008, 68302, 68306, 68307, 68322, 68356], 68010, 68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060], cpu32 [68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349, 68360], fidoa [fido]) -- statement `sub.b %d1,%d3' ignored
{standard input}:609: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu 4(%a1){%d0,OnePlusOSS#8},%d0' ignored
{standard input}:752: Error: operands mismatch -- statement `mulu.l 4(%a0),%d3:%d0' ignored
{standard input}:1155: Error: operands mismatch -- statement `divu.l %d0,%d3:%d7' ignored
The math emulation support code is intended for 68020 and higher, and
uses several instructions or instruction modes not available on coldfire
or 68000.
Originally, the dependency of M68KFPU_EMU on MMU was fine, as MMU
support was only available on 68020 or higher. But this assumption
was broken by the introduction of MMU support for M547x and M548x.
Drop the dependency on MMU, as the code should work fine on 68020 and up
without MMU (which are not yet supported by Linux, though).
Add dependencies on M68KCLASSIC (to rule out Coldfire) and FPU (kernel
has some type of floating-point support --- be it hardware or software
emulated, to rule out anything below 68020).
Fixes: 1f7034b ("m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Greg Ungerer <gerg@linux-m68k.org>
Link: https://lore.kernel.org/r/18c34695b7c95107f60ccca82a4ff252f3edf477.1652446117.git.geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Sep 27, 2022
…ace is dead
commit c3b0f72e805f0801f05fa2aa52011c4bfc694c44 upstream.
ftrace_startup does not remove ops from ftrace_ops_list when
ftrace_startup_enable fails:
register_ftrace_function
ftrace_startup
__register_ftrace_function
...
add_ftrace_ops(&ftrace_ops_list, ops)
...
...
ftrace_startup_enable // if ftrace failed to modify, ftrace_disabled is set to 1
...
return 0 // ops is in the ftrace_ops_list.
When ftrace_disabled = 1, unregister_ftrace_function simply returns without doing anything:
unregister_ftrace_function
ftrace_shutdown
if (unlikely(ftrace_disabled))
return -ENODEV; // return here, __unregister_ftrace_function is not executed,
// as a result, ops is still in the ftrace_ops_list
__unregister_ftrace_function
...
If ops is dynamically allocated, it will be free later, in this case,
is_ftrace_trampoline accesses NULL pointer:
is_ftrace_trampoline
ftrace_ops_trampoline
do_for_each_ftrace_op(op, ftrace_ops_list) // OOPS! op may be NULL!
Syzkaller reports as follows:
[ 1203.506103] BUG: kernel NULL pointer dereference, address: 000000000000010b
[ 1203.508039] #PF: supervisor read access in kernel mode
[ 1203.508798] #PF: error_code(0x0000) - not-present page
[ 1203.509558] PGD 800000011660b067 P4D 800000011660b067 PUD 130fb8067 PMD 0
[ 1203.510560] Oops: 0000 [PeterCxy#1] SMP KASAN PTI
[ 1203.511189] CPU: 6 PID: 29532 Comm: syz-executor.2 Tainted: G B W 5.10.0 OnePlusOSS#8
[ 1203.512324] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 1203.513895] RIP: 0010:is_ftrace_trampoline+0x26/0xb0
[ 1203.514644] Code: ff eb d3 90 41 55 41 54 49 89 fc 55 53 e8 f2 00 fd ff 48 8b 1d 3b 35 5d 03 e8 e6 00 fd ff 48 8d bb 90 00 00 00 e8 2a 81 26 00 <48> 8b ab 90 00 00 00 48 85 ed 74 1d e8 c9 00 fd ff 48 8d bb 98 00
[ 1203.518838] RSP: 0018:ffffc900012cf960 EFLAGS: 00010246
[ 1203.520092] RAX: 0000000000000000 RBX: 000000000000007b RCX: ffffffff8a331866
[ 1203.521469] RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000000010b
[ 1203.522583] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffffff8df18b07
[ 1203.523550] R10: fffffbfff1be3160 R11: 0000000000000001 R12: 0000000000478399
[ 1203.524596] R13: 0000000000000000 R14: ffff888145088000 R15: 0000000000000008
[ 1203.525634] FS: 00007f429f5f4700(0000) GS:ffff8881daf00000(0000) knlGS:0000000000000000
[ 1203.526801] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1203.527626] CR2: 000000000000010b CR3: 0000000170e1e001 CR4: 00000000003706e0
[ 1203.528611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1203.529605] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Therefore, when ftrace_startup_enable fails, we need to rollback registration
process and remove ops from ftrace_ops_list.
Link: https://lkml.kernel.org/r/20220818032659.56209-1-yangjihong1@huawei.com
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Sep 27, 2022
[ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 PeterCxy#1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 OnePlusOSS#2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 OnePlusOSS#3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 OnePlusOSS#4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 OnePlusOSS#5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 OnePlusOSS#6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 OnePlusOSS#7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 OnePlusOSS#8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Oct 16, 2022
LLVM's integrated assembler appears to assume an argument with default
value is passed whenever it sees a comma right after the macro name.
It will be fine if the number of following arguments is one less than
the number of parameters specified in the macro definition. Otherwise,
it fails. For example, the following code works:
$ cat foo.s
.macro foo arg1=2, arg2=4
ldr r0, [r1, #\arg1]
ldr r0, [r1, #\arg2]
.endm
foo, arg2=8
$ llvm-mc -triple=armv7a -filetype=obj foo.s -o ias.o
arm-linux-gnueabihf-objdump -dr ias.o
ias.o: file format elf32-littlearm
Disassembly of section .text:
00000000 <.text>:
0: e5910001 ldr r0, [r1, OnePlusOSS#2]
4: e5910003 ldr r0, [r1, OnePlusOSS#8]
While the the following code would fail:
$ cat foo.s
.macro foo arg1=2, arg2=4
ldr r0, [r1, #\arg1]
ldr r0, [r1, #\arg2]
.endm
foo, arg1=2, arg2=8
$ llvm-mc -triple=armv7a -filetype=obj foo.s -o ias.o
foo.s:6:14: error: too many positional arguments
foo, arg1=2, arg2=8
This causes build failures as follows:
arch/arm64/kernel/vdso/gettimeofday.S:230:24: error: too many positional
arguments
clock_gettime_return, shift=1
^
arch/arm64/kernel/vdso/gettimeofday.S:253:24: error: too many positional
arguments
clock_gettime_return, shift=1
^
arch/arm64/kernel/vdso/gettimeofday.S:274:24: error: too many positional
arguments
clock_gettime_return, shift=1
This error is not in mainline because commit 28b1a824a4f4 ("arm64: vdso:
Substitute gettimeofday() with C implementation") rewrote this assembler
file in C as part of a 25 patch series that is unsuitable for stable.
Just remove the comma in the clock_gettime_return invocations in 4.19 so
that GNU as and LLVM's integrated assembler work the same.
Link:
ClangBuiltLinux/linux#1349
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jian Cai <jiancai@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I7eea04241c1f8ac7bc3b7915b781acdd1e2b6686
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Jun 12, 2023
[ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 PeterCxy#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f PeterCxy#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f PeterCxy#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f OnePlusOSS#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d OnePlusOSS#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d OnePlusOSS#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 OnePlusOSS#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 OnePlusOSS#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac OnePlusOSS#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 OnePlusOSS#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 OnePlusOSS#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 OnePlusOSS#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 OnePlusOSS#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac OnePlusOSS#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d OnePlusOSS#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Sep 26, 2023
[ Upstream commit 00374d9b6d9f932802b55181be9831aa948e5b7c ] Normally, x->replay_esn and x->preplay_esn should be allocated at xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the xfrm_update_ae_params(...) is okay to update them. However, the current implementation of xfrm_new_ae(...) allows a malicious user to directly dereference a NULL pointer and crash the kernel like below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0 Oops: 0002 [PeterCxy#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 OnePlusOSS#8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4 RIP: 0010:memcpy_orig+0xad/0x140 Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c RSP: 0018:ffff888008f57658 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571 RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818 R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000 FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x1e8/0x500 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? fixup_exception+0x36/0x460 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? exc_page_fault+0x5e/0xc0 ? asm_exc_page_fault+0x26/0x30 ? xfrm_update_ae_params+0xd1/0x260 ? memcpy_orig+0xad/0x140 ? __pfx__raw_spin_lock_bh+0x10/0x10 xfrm_update_ae_params+0xe7/0x260 xfrm_new_ae+0x298/0x4e0 ? __pfx_xfrm_new_ae+0x10/0x10 ? __pfx_xfrm_new_ae+0x10/0x10 xfrm_user_rcv_msg+0x25a/0x410 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __alloc_skb+0xcf/0x210 ? stack_trace_save+0x90/0xd0 ? filter_irq_stacks+0x1c/0x70 ? __stack_depot_save+0x39/0x4e0 ? __kasan_slab_free+0x10a/0x190 ? kmem_cache_free+0x9c/0x340 ? netlink_recvmsg+0x23c/0x660 ? sock_recvmsg+0xeb/0xf0 ? __sys_recvfrom+0x13c/0x1f0 ? __x64_sys_recvfrom+0x71/0x90 ? do_syscall_64+0x3f/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc ? copyout+0x3e/0x50 netlink_rcv_skb+0xd6/0x210 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_sock_has_perm+0x10/0x10 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 xfrm_netlink_rcv+0x44/0x50 netlink_unicast+0x36f/0x4c0 ? __pfx_netlink_unicast+0x10/0x10 ? netlink_recvmsg+0x500/0x660 netlink_sendmsg+0x3b7/0x700 This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit adds additional NULL check in xfrm_update_ae_params to fix the NPD. Fixes: d8647b7 ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Dec 9, 2023
[ Upstream commit a154f5f643c6ecddd44847217a7a3845b4350003 ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f PeterCxy#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 OnePlusOSS#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee OnePlusOSS#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 OnePlusOSS#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 OnePlusOSS#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c OnePlusOSS#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] OnePlusOSS#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] OnePlusOSS#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f OnePlusOSS#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 OnePlusOSS#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] OnePlusOSS#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc OnePlusOSS#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] OnePlusOSS#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] OnePlusOSS#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] OnePlusOSS#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] OnePlusOSS#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 OnePlusOSS#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] OnePlusOSS#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] OnePlusOSS#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 OnePlusOSS#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Dec 18, 2023
[ Upstream commit 00374d9b6d9f932802b55181be9831aa948e5b7c ] Normally, x->replay_esn and x->preplay_esn should be allocated at xfrm_alloc_replay_state_esn(...) in xfrm_state_construct(...), hence the xfrm_update_ae_params(...) is okay to update them. However, the current implementation of xfrm_new_ae(...) allows a malicious user to directly dereference a NULL pointer and crash the kernel like below. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 8253067 P4D 8253067 PUD 8e0e067 PMD 0 Oops: 0002 [PeterCxy#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 98 Comm: poc.npd Not tainted 6.4.0-rc7-00072-gdad9774deaf1 OnePlusOSS#8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.o4 RIP: 0010:memcpy_orig+0xad/0x140 Code: e8 4c 89 5f e0 48 8d 7f e0 73 d2 83 c2 20 48 29 d6 48 29 d7 83 fa 10 72 34 4c 8b 06 4c 8b 4e 08 c RSP: 0018:ffff888008f57658 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff888008bd0000 RCX: ffffffff8238e571 RDX: 0000000000000018 RSI: ffff888007f64844 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff888008f57818 R13: ffff888007f64aa4 R14: 0000000000000000 R15: 0000000000000000 FS: 00000000014013c0(0000) GS:ffff88806d600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000054d8000 CR4: 00000000000006f0 Call Trace: <TASK> ? __die+0x1f/0x70 ? page_fault_oops+0x1e8/0x500 ? __pfx_is_prefetch.constprop.0+0x10/0x10 ? __pfx_page_fault_oops+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? fixup_exception+0x36/0x460 ? _raw_spin_unlock_irqrestore+0x11/0x40 ? exc_page_fault+0x5e/0xc0 ? asm_exc_page_fault+0x26/0x30 ? xfrm_update_ae_params+0xd1/0x260 ? memcpy_orig+0xad/0x140 ? __pfx__raw_spin_lock_bh+0x10/0x10 xfrm_update_ae_params+0xe7/0x260 xfrm_new_ae+0x298/0x4e0 ? __pfx_xfrm_new_ae+0x10/0x10 ? __pfx_xfrm_new_ae+0x10/0x10 xfrm_user_rcv_msg+0x25a/0x410 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __alloc_skb+0xcf/0x210 ? stack_trace_save+0x90/0xd0 ? filter_irq_stacks+0x1c/0x70 ? __stack_depot_save+0x39/0x4e0 ? __kasan_slab_free+0x10a/0x190 ? kmem_cache_free+0x9c/0x340 ? netlink_recvmsg+0x23c/0x660 ? sock_recvmsg+0xeb/0xf0 ? __sys_recvfrom+0x13c/0x1f0 ? __x64_sys_recvfrom+0x71/0x90 ? do_syscall_64+0x3f/0x90 ? entry_SYSCALL_64_after_hwframe+0x72/0xdc ? copyout+0x3e/0x50 netlink_rcv_skb+0xd6/0x210 ? __pfx_xfrm_user_rcv_msg+0x10/0x10 ? __pfx_netlink_rcv_skb+0x10/0x10 ? __pfx_sock_has_perm+0x10/0x10 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 xfrm_netlink_rcv+0x44/0x50 netlink_unicast+0x36f/0x4c0 ? __pfx_netlink_unicast+0x10/0x10 ? netlink_recvmsg+0x500/0x660 netlink_sendmsg+0x3b7/0x700 This Null-ptr-deref bug is assigned CVE-2023-3772. And this commit adds additional NULL check in xfrm_update_ae_params to fix the NPD. Fixes: d8647b7 ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Dec 18, 2023
[ Upstream commit a154f5f643c6ecddd44847217a7a3845b4350003 ] The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f PeterCxy#1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 OnePlusOSS#2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee OnePlusOSS#3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 OnePlusOSS#4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 OnePlusOSS#5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c OnePlusOSS#6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] OnePlusOSS#7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] OnePlusOSS#8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f OnePlusOSS#9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 OnePlusOSS#10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] OnePlusOSS#11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc OnePlusOSS#12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] OnePlusOSS#13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] OnePlusOSS#14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] OnePlusOSS#15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] OnePlusOSS#16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 OnePlusOSS#17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] OnePlusOSS#18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] OnePlusOSS#19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 OnePlusOSS#20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mhmdeve
pushed a commit
to mhmdeve/kernel_oneplus_sm8150
that referenced
this issue
Dec 21, 2023
LLVM's integrated assembler appears to assume an argument with default
value is passed whenever it sees a comma right after the macro name.
It will be fine if the number of following arguments is one less than
the number of parameters specified in the macro definition. Otherwise,
it fails. For example, the following code works:
$ cat foo.s
.macro foo arg1=2, arg2=4
ldr r0, [r1, #\arg1]
ldr r0, [r1, #\arg2]
.endm
foo, arg2=8
$ llvm-mc -triple=armv7a -filetype=obj foo.s -o ias.o
arm-linux-gnueabihf-objdump -dr ias.o
ias.o: file format elf32-littlearm
Disassembly of section .text:
00000000 <.text>:
0: e5910001 ldr r0, [r1, OnePlusOSS#2]
4: e5910003 ldr r0, [r1, OnePlusOSS#8]
While the the following code would fail:
$ cat foo.s
.macro foo arg1=2, arg2=4
ldr r0, [r1, #\arg1]
ldr r0, [r1, #\arg2]
.endm
foo, arg1=2, arg2=8
$ llvm-mc -triple=armv7a -filetype=obj foo.s -o ias.o
foo.s:6:14: error: too many positional arguments
foo, arg1=2, arg2=8
This causes build failures as follows:
arch/arm64/kernel/vdso/gettimeofday.S:230:24: error: too many positional
arguments
clock_gettime_return, shift=1
^
arch/arm64/kernel/vdso/gettimeofday.S:253:24: error: too many positional
arguments
clock_gettime_return, shift=1
^
arch/arm64/kernel/vdso/gettimeofday.S:274:24: error: too many positional
arguments
clock_gettime_return, shift=1
This error is not in mainline because commit 28b1a824a4f4 ("arm64: vdso:
Substitute gettimeofday() with C implementation") rewrote this assembler
file in C as part of a 25 patch series that is unsuitable for stable.
Just remove the comma in the clock_gettime_return invocations in 4.19 so
that GNU as and LLVM's integrated assembler work the same.
Link:
ClangBuiltLinux/linux#1349
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jian Cai <jiancai@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change-Id: I7eea04241c1f8ac7bc3b7915b781acdd1e2b6686
elginsk8r
pushed a commit
to elginsk8r/android_kernel_oneplus_sm8150
that referenced
this issue
Jun 26, 2024
[ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 PeterCxy#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 OnePlusOSS#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e OnePlusOSS#3 [fffffe00003fced0] do_nmi at ffffffff8922660d OnePlusOSS#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 OnePlusOSS#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 OnePlusOSS#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 OnePlusOSS#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 OnePlusOSS#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 OnePlusOSS#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 OnePlusOSS#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 OnePlusOSS#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 OnePlusOSS#12 [ffffa65531497b68] printk at ffffffff89318306 OnePlusOSS#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 OnePlusOSS#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] OnePlusOSS#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] OnePlusOSS#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] OnePlusOSS#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] OnePlusOSS#18 [ffffa65531497f10] kthread at ffffffff892d2e72 OnePlusOSS#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> (cherry picked from commit 68459b8e3ee554ce71878af9eb69659b9462c588) Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Following error happens when I try to build the kernel. Could you please help to check possible root cause? Thank you!
../arch/arm64/kernel/vdso/note.S:26:1: warning: DWARF2 only supports one section per compilation unit
.pushsection .note.Linux, "a",@note ; .balign 4 ; .long 2f - 1f ; .long 4484f - 3f ; .long 0 ; 1:.asciz "Linux" ; 2:.balign 4 ; 3:
^
:1:5: error: expected absolute expression
.if (. - jumptable) != 4 * (0)
^
../arch/arm64/kernel/vdso/gettimeofday.S:194:2: note: while in macro instantiation
jump_slot jumptable, 0, realtime
^
:2:2: error: Jump slot index mismatch
.error "Jump slot index mismatch"
^
../arch/arm64/kernel/vdso/gettimeofday.S:194:2: note: while in macro instantiation
jump_slot jumptable, 0, realtime
^
../arch/arm64/kernel/vdso/gettimeofday.S:223:24: error: too many positional arguments
clock_gettime_return, shift=1
^
../arch/arm64/kernel/vdso/gettimeofday.S:246:24: error: too many positional arguments
clock_gettime_return, shift=1
^
../arch/arm64/kernel/vdso/gettimeofday.S:267:24: error: too many positional arguments
clock_gettime_return, shift=1
^
make[2]: *** [arch/arm64/kernel/vdso/gettimeofday.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [vdso_prepare] Error 2
make[1]: Leaving directory `/home/mbuse/Share_8T/clement/oneplus7/android_kernel_oneplus_sm8150-oneplus-SM8150_P_9.0/out'
make: *** [sub-make] Error 2
Following is my building process.
mkdir out
export PATH=$PATH:/home/test/oneplus7/linux-x86-clang-9.0.8/bin
make O=out ARCH=arm64 ranchu64_defconfig
make -j16 O=out ARCH=arm64 CC=clang CLANG_TRIPLE=aarch64-linux-gnu- CROSS_COMPILE=aarch64-linux-android-
The text was updated successfully, but these errors were encountered: