Make sure you have a device with label stating [FCC ID: ZDER3Version 1.0]. There are now devices on the market still marked as Foscam X5, which probably have different internals and do not support following flashing procedure/image. You will end up with bricked device! The label on those newer models contain designation like: Device Name: MPS50501 FCC ID: ZDEX5 Version 6.0
Format an sdcard to FAT32 and copy the content of the following archive to the card:
Update your wireless credentials on autostart.sh:
#!/bin/sh
+WLAN_SSID="Router"
+WLAN_PASS="12345678"- Make sure the camera is powered off, put the prepared sdcard into the device.
- Power the device on and wait at least 4 minutes.
- Shortly after an OpenIPC camera should appear on your wlan.
| IRLed | IRCut | Speaker | Reset | IRSensor |
|---|---|---|---|---|
| GPIO0 | GPIO3 | GPIO14 | GPIO66 | GPIO80 |
cli -s .nightMode.irSensorPin 80
cli -s .nightMode.irCutPin1 3
cli -s .nightMode.irCutSingleInvert true
cli -s .nightMode.backlightPin 0
cli -s .audio.speakerPin 14
cli -s .audio.speakerPinInvert true
fw_setenv wlandev rtl8188fu-ssc337de-foscam
fw_setenv wlanssid Router
fw_setenv wlanpass 12345678
Expand pictures
- Labels: X3/R3/R5/X3E
- https://fccid.io/ZDER3