Python code to model the refractory wear of a steel ladle
pip install -r requirements.txt python example.py
The inputs are all located in various input files and read using pandas. The data files contains more data than is currently used, but these data points might be useful in the future
Variable location Description
Temperatura <heat number>.gz Measurement of temperature in steel. First value is used as a backup if no EAF temperature is given, all values are used to compare the model to data time <heat number>.gz Preprocessed data power <heat number>.gz Preprocessed data Consumo_electrico <heat number>.gz Consumed electricity, energy will go into slag (and then steel). This will give a temperature increase Caudal_gas <heat number>.gz The gas rate is used to calculate utau, which is used to calculate heat transfer coefficients in steel and slag Fechahora <heat number>.gz Time, used to determine what happens when Heat number Alloys addition Need the heat number to connect the rest of data time and weights.csv Addition time Alloys addition At what time additions are added, used to time and weights.csv determine when to add additions Mass added per heat (ton) Alloys addition Mass of additions time and weights.csv
Variables listed in no particular order
Variable location Description
heat number tt.csv
tapping T (ºC) tt.csv Temperature from the EAF used as an input temperature
ncol 2019_Process Heat number, needed to find other data matching
Parameters.csv
ncuch 2019_Process Ladle number
Parameters.csv
nusos 2019_Process Number of heats since last total rebuild
Parameters.csv
acero_liquido 2019_Process Amount of liquid steel, used as the amount of
Parameters.csv steel in the ladle for simulation
Heatnumber Ladlewaittime.csv Heat number
Inactive (min) Ladlewaittime.csv
Variable Description
TsteelV Temperature (C) in steel TslagV Temperature (C) in slag TInnerW Temperature (C) in inner most wall layer at brick 5 TOuterW Temperature (C) in outer most wall layer at brick 5 massstelV Mass (kg) of steel in ladle massslagV Mass (kg) of slag in ladle TimeV Time (s) TmeasV Measured temperature (also given in data, this is for plotting convenience) PowerV Power added to system ElectV Electric power added qslagV Heat flux in slag qsteelV Heat flux in steel qwallV Heat flux in wall qbottomV Heat flux in bottom qtot Total heat flux TsideV Temperature in wall TbottomV Temperature in bottom yerode Fraction of erosion for each brick layer