cpufreq: dt-platdev: Add stm32mp151 and stm32mp153 SOCs in the blacklist #7
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
CubeMX code generates dts with compatible string set to "st,stm32mp151" and "st,stm32mp153" for stm32mp151 and stm32mp153 SOCs. Blacklisting these platforms avoids the following dump at boot when stm32-cpufreq is loaded. [ 1.640541] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt' [ 1.640564] CPU: 0 PID: 16 Comm: kworker/0:1 Not tainted 5.4.31-g33ca1c71a-dirty STMicroelectronics#8 [ 1.640575] Hardware name: STM32 (Device Tree Support) [ 1.640602] Workqueue: events deferred_probe_work_func [ 1.640645] [<c01124dc>] (unwind_backtrace) from [<c010d784>] (show_stack+0x10/0x14) [ 1.640669] [<c010d784>] (show_stack) from [<c0b05f94>] (dump_stack+0xb0/0xc4) [ 1.640694] [<c0b05f94>] (dump_stack) from [<c034978c>] (sysfs_warn_dup+0x58/0x64) [ 1.640716] [<c034978c>] (sysfs_warn_dup) from [<c03498c8>] (sysfs_create_dir_ns+0xec/0xfc) [ 1.640737] [<c03498c8>] (sysfs_create_dir_ns) from [<c0b0b5e0>] (kobject_add_internal+0xb4/0x354) [ 1.640758] [<c0b0b5e0>] (kobject_add_internal) from [<c0b0b8dc>] (kobject_add+0x5c/0xc8) [ 1.640781] [<c0b0b8dc>] (kobject_add) from [<c066fad0>] (device_add+0x110/0x644) [ 1.640807] [<c066fad0>] (device_add) from [<c06766c0>] (platform_device_add+0x108/0x248) [ 1.640830] [<c06766c0>] (platform_device_add) from [<c0677270>] (platform_device_register_full+0xd0/0x110) [ 1.640854] [<c0677270>] (platform_device_register_full) from [<c08d0668>] (stm32_cpufreq_probe+0x1ac/0x1b8) [ 1.640876] [<c08d0668>] (stm32_cpufreq_probe) from [<c0676924>] (platform_drv_probe+0x48/0x98) [ 1.640898] [<c0676924>] (platform_drv_probe) from [<c0674440>] (really_probe+0x24c/0x488) [ 1.640918] [<c0674440>] (really_probe) from [<c0674844>] (driver_probe_device+0x78/0x154) [ 1.640938] [<c0674844>] (driver_probe_device) from [<c0672494>] (bus_for_each_drv+0x84/0xd0) [ 1.640958] [<c0672494>] (bus_for_each_drv) from [<c0674154>] (__device_attach+0xe0/0x178) [ 1.640978] [<c0674154>] (__device_attach) from [<c0673268>] (bus_probe_device+0x84/0x8c) [ 1.640998] [<c0673268>] (bus_probe_device) from [<c06737bc>] (deferred_probe_work_func+0x84/0xc4) [ 1.641019] [<c06737bc>] (deferred_probe_work_func) from [<c0142368>] (process_one_work+0x1dc/0x58c) [ 1.641038] [<c0142368>] (process_one_work) from [<c0142960>] (worker_thread+0x248/0x528) [ 1.641059] [<c0142960>] (worker_thread) from [<c01486c0>] (kthread+0x11c/0x144) [ 1.641081] [<c01486c0>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) [ 1.641093] Exception stack(0xd7175fb0 to 0xd7175ff8) [ 1.641109] 5fa0: 00000000 00000000 00000000 00000000 [ 1.641127] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.641143] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 1.641161] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory.
|
This pull request has been refused, the Contribution License Agreement must be signed. |
atorgue
added a commit
that referenced
this pull request
Nov 2, 2020
Mutex protection in not needed in _allocate_opp_table as it this function is already called under mutex lock. Furthermore, it fixes the following issue seen with CONFIG_PROVE_LOCKING flag: [ 3.648912] ========================= [ 3.648927] WARNING: held lock freed! [ 3.648944] 5.4.56-00014-g7cc4a3bdec16 #7 Not tainted [ 3.648957] ------------------------- [ 3.648976] kworker/1:1/22 is freeing memory df183c00-df183fff, with a lock still held there! [ 3.648991] df183ca0 (&opp_table->lock){+.+.}, at: _opp_get_opp_table+0x1cc/0x224 [ 3.649037] 5 locks held by kworker/1:1/22: [ 3.649049] #0: df0086a0 ((wq_completion)events){+.+.}, at: process_one_work+0x200/0x858 [ 3.649082] #1: df515f1c (deferred_probe_work){+.+.}, at: process_one_work+0x200/0x858 [ 3.649110] #2: d1ff08cc (&dev->mutex){....}, at: __device_attach+0x34/0x17c [ 3.649145] #3: c139e5e0 (opp_table_lock){+.+.}, at: _opp_get_opp_table+0x1c/0x224 [ 3.649175] #4: df183ca0 (&opp_table->lock){+.+.}, at: _opp_get_opp_table+0x1cc/0x224 Fixes: cf1f361 ("opp: core: fix memory leak in probe deferral") Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Change-Id: I6da51fab26b698bb803a3a8ddf5454f73d8af956 Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/178474 Reviewed-by: CITOOLS <smet-aci-reviews@lists.codex.cro.st.com>
mcarlin-ds
referenced
this pull request
in DatumSystems/linux
Oct 2, 2022
[ Upstream commit f63d24b ] This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ================================================================== ffff88800c0f0600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Reported-by: Sönke Huster <soenke.huster@eknoes.de> Tested-by: Sönke Huster <soenke.huster@eknoes.de> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
mcarlin-ds
referenced
this pull request
in DatumSystems/linux
Oct 2, 2022
[ Upstream commit af68656 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 #9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
dponchalee
pushed a commit
to dponchalee/linux-st
that referenced
this pull request
Feb 2, 2023
…loc() commit d29f590 upstream. The voice allocator sometimes begins allocating from near the end of the array and then wraps around, however snd_emu10k1_pcm_channel_alloc() accesses the newly allocated voices as if it never wrapped around. This results in out of bounds access if the first voice has a high enough index so that first_voice + requested_voice_count > NUM_G (64). The more voices are requested, the more likely it is for this to occur. This was initially discovered using PipeWire, however it can be reproduced by calling aplay multiple times with 16 channels: aplay -r 48000 -D plughw:CARD=Live,DEV=3 -c 16 /dev/zero UBSAN: array-index-out-of-bounds in sound/pci/emu10k1/emupcm.c:127:40 index 65 is out of range for type 'snd_emu10k1_voice [64]' CPU: 1 PID: 31977 Comm: aplay Tainted: G W IOE 6.0.0-rc2-emu10k1+ STMicroelectronics#7 Hardware name: ASUSTEK COMPUTER INC P5W DH Deluxe/P5W DH Deluxe, BIOS 3002 07/22/2010 Call Trace: <TASK> dump_stack_lvl+0x49/0x63 dump_stack+0x10/0x16 ubsan_epilogue+0x9/0x3f __ubsan_handle_out_of_bounds.cold+0x44/0x49 snd_emu10k1_playback_hw_params+0x3bc/0x420 [snd_emu10k1] snd_pcm_hw_params+0x29f/0x600 [snd_pcm] snd_pcm_common_ioctl+0x188/0x1410 [snd_pcm] ? exit_to_user_mode_prepare+0x35/0x170 ? do_syscall_64+0x69/0x90 ? syscall_exit_to_user_mode+0x26/0x50 ? do_syscall_64+0x69/0x90 ? exit_to_user_mode_prepare+0x35/0x170 snd_pcm_ioctl+0x27/0x40 [snd_pcm] __x64_sys_ioctl+0x95/0xd0 do_syscall_64+0x5c/0x90 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Signed-off-by: Tasos Sahanidis <tasos@tasossah.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/3707dcab-320a-62ff-63c0-73fc201ef756@tasossah.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dponchalee
pushed a commit
to dponchalee/linux-st
that referenced
this pull request
Feb 2, 2023
[ Upstream commit 84a5358 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 STMicroelectronics#1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 STMicroelectronics#2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 STMicroelectronics#3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 STMicroelectronics#4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 STMicroelectronics#5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 STMicroelectronics#6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 STMicroelectronics#7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 STMicroelectronics#8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw@gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853d ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
mingzhangqun
pushed a commit
to mingzhangqun/st-linux
that referenced
this pull request
Mar 23, 2024
[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 STMicroelectronics#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f STMicroelectronics#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f STMicroelectronics#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f STMicroelectronics#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d STMicroelectronics#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d STMicroelectronics#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 STMicroelectronics#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 STMicroelectronics#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac STMicroelectronics#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 STMicroelectronics#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 STMicroelectronics#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 STMicroelectronics#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 STMicroelectronics#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac STMicroelectronics#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d STMicroelectronics#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mingzhangqun
pushed a commit
to mingzhangqun/st-linux
that referenced
this pull request
Mar 23, 2024
[ Upstream commit a2f4c14 ] A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156. The Source Routing Header (SRH) has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n]. The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows: 1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address. When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI. OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE. Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes. Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0]. Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1. [0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [STMicroelectronics#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 STMicroelectronics#7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b </TASK> Modules linked in: Fixes: 8610c7c ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
CubeMX code generates dts with compatible string set to "st,stm32mp151" and "st,stm32mp153" for stm32mp151 and stm32mp153 SOCs.
Blacklisting these platforms avoids the following dump at boot when stm32-cpufreq is loaded.
[ 1.640541] sysfs: cannot create duplicate filename '/devices/platform/cpufreq-dt'
[ 1.640564] CPU: 0 PID: 16 Comm: kworker/0:1 Not tainted 5.4.31-g33ca1c71a-dirty #8
[ 1.640575] Hardware name: STM32 (Device Tree Support)
[ 1.640602] Workqueue: events deferred_probe_work_func
[ 1.640645] [] (unwind_backtrace) from [] (show_stack+0x10/0x14)
[ 1.640669] [] (show_stack) from [] (dump_stack+0xb0/0xc4)
[ 1.640694] [] (dump_stack) from [] (sysfs_warn_dup+0x58/0x64)
[ 1.640716] [] (sysfs_warn_dup) from [] (sysfs_create_dir_ns+0xec/0xfc)
[ 1.640737] [] (sysfs_create_dir_ns) from [] (kobject_add_internal+0xb4/0x354)
[ 1.640758] [] (kobject_add_internal) from [] (kobject_add+0x5c/0xc8)
[ 1.640781] [] (kobject_add) from [] (device_add+0x110/0x644)
[ 1.640807] [] (device_add) from [] (platform_device_add+0x108/0x248)
[ 1.640830] [] (platform_device_add) from [] (platform_device_register_full+0xd0/0x110)
[ 1.640854] [] (platform_device_register_full) from [] (stm32_cpufreq_probe+0x1ac/0x1b8)
[ 1.640876] [] (stm32_cpufreq_probe) from [] (platform_drv_probe+0x48/0x98)
[ 1.640898] [] (platform_drv_probe) from [] (really_probe+0x24c/0x488)
[ 1.640918] [] (really_probe) from [] (driver_probe_device+0x78/0x154)
[ 1.640938] [] (driver_probe_device) from [] (bus_for_each_drv+0x84/0xd0)
[ 1.640958] [] (bus_for_each_drv) from [] (__device_attach+0xe0/0x178)
[ 1.640978] [] (__device_attach) from [] (bus_probe_device+0x84/0x8c)
[ 1.640998] [] (bus_probe_device) from [] (deferred_probe_work_func+0x84/0xc4)
[ 1.641019] [] (deferred_probe_work_func) from [] (process_one_work+0x1dc/0x58c)
[ 1.641038] [] (process_one_work) from [] (worker_thread+0x248/0x528)
[ 1.641059] [] (worker_thread) from [] (kthread+0x11c/0x144)
[ 1.641081] [] (kthread) from [] (ret_from_fork+0x14/0x2c)
[ 1.641093] Exception stack(0xd7175fb0 to 0xd7175ff8)
[ 1.641109] 5fa0: 00000000 00000000 00000000 00000000
[ 1.641127] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.641143] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 1.641161] kobject_add_internal failed for cpufreq-dt with -EEXIST, don't try to register things with the same name in the same directory.