Modify rpsmg_sdb driver #1

mcarlin-ds · 2021-05-19T21:44:53Z

Add ioctl for reading physical address of sdb buffer for transfer to CM4. Allows CM4 to read from DDR3 shared buffer at the actual hardware address.

…sdb buffer for transfer to CM4

…ction commit ddc204b upstream. I was made aware of the following lockdep splat: [ 2516.308763] ===================================================== [ 2516.309085] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 2516.309433] 5.14.0-51.el9.aarch64+debug #1 Not tainted [ 2516.309703] ----------------------------------------------------- [ 2516.310149] stress-ng/153663 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 2516.310512] ffff0000e422b198 (&newf->file_lock){+.+.}-{2:2}, at: fd_install+0x368/0x4f0 [ 2516.310944] and this task is already holding: [ 2516.311248] ffff0000c08140d8 (&sighand->siglock){-.-.}-{2:2}, at: copy_process+0x1e2c/0x3e80 [ 2516.311804] which would create a new lock dependency: [ 2516.312066] (&sighand->siglock){-.-.}-{2:2} -> (&newf->file_lock){+.+.}-{2:2} [ 2516.312446] but this new dependency connects a HARDIRQ-irq-safe lock: [ 2516.312983] (&sighand->siglock){-.-.}-{2:2} : [ 2516.330700] Possible interrupt unsafe locking scenario: [ 2516.331075] CPU0 CPU1 [ 2516.331328] ---- ---- [ 2516.331580] lock(&newf->file_lock); [ 2516.331790] local_irq_disable(); [ 2516.332231] lock(&sighand->siglock); [ 2516.332579] lock(&newf->file_lock); [ 2516.332922] <Interrupt> [ 2516.333069] lock(&sighand->siglock); [ 2516.333291] *** DEADLOCK *** [ 2516.389845] stack backtrace: [ 2516.390101] CPU: 3 PID: 153663 Comm: stress-ng Kdump: loaded Not tainted 5.14.0-51.el9.aarch64+debug #1 [ 2516.390756] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2516.391155] Call trace: [ 2516.391302] dump_backtrace+0x0/0x3e0 [ 2516.391518] show_stack+0x24/0x30 [ 2516.391717] dump_stack_lvl+0x9c/0xd8 [ 2516.391938] dump_stack+0x1c/0x38 [ 2516.392247] print_bad_irq_dependency+0x620/0x710 [ 2516.392525] check_irq_usage+0x4fc/0x86c [ 2516.392756] check_prev_add+0x180/0x1d90 [ 2516.392988] validate_chain+0x8e0/0xee0 [ 2516.393215] __lock_acquire+0x97c/0x1e40 [ 2516.393449] lock_acquire.part.0+0x240/0x570 [ 2516.393814] lock_acquire+0x90/0xb4 [ 2516.394021] _raw_spin_lock+0xe8/0x154 [ 2516.394244] fd_install+0x368/0x4f0 [ 2516.394451] copy_process+0x1f5c/0x3e80 [ 2516.394678] kernel_clone+0x134/0x660 [ 2516.394895] __do_sys_clone3+0x130/0x1f4 [ 2516.395128] __arm64_sys_clone3+0x5c/0x7c [ 2516.395478] invoke_syscall.constprop.0+0x78/0x1f0 [ 2516.395762] el0_svc_common.constprop.0+0x22c/0x2c4 [ 2516.396050] do_el0_svc+0xb0/0x10c [ 2516.396252] el0_svc+0x24/0x34 [ 2516.396436] el0t_64_sync_handler+0xa4/0x12c [ 2516.396688] el0t_64_sync+0x198/0x19c [ 2517.491197] NET: Registered PF_ATMPVC protocol family [ 2517.491524] NET: Registered PF_ATMSVC protocol family [ 2591.991877] sched: RT throttling activated One way to solve this problem is to move the fd_install() call out of the sighand->siglock critical section. Before commit 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups"), the pidfd installation was done without holding both the task_list lock and the sighand->siglock. Obviously, holding these two locks are not really needed to protect the fd_install() call. So move the fd_install() call down to after the releases of both locks. Link: https://lore.kernel.org/r/20220208163912.1084752-1-longman@redhat.com Fixes: 6fd2fe4 ("copy_process(): don't use ksys_close() on cleanups") Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dcf4ff7 upstream. xennet_destroy_queues() relies on info->netdev->real_num_tx_queues to delete queues. Since d7dac08 ("net-sysfs: update the queue counts in the unregistration path"), unregister_netdev() indirectly sets real_num_tx_queues to 0. Those two facts together means, that xennet_destroy_queues() called from xennet_remove() cannot do its job, because it's called after unregister_netdev(). This results in kfree-ing queues that are still linked in napi, which ultimately crashes: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Tainted: G W 5.16.10-1.32.fc32.qubes.x86_64+ torvalds#226 RIP: 0010:free_netdev+0xa3/0x1a0 Code: ff 48 89 df e8 2e e9 00 00 48 8b 43 50 48 8b 08 48 8d b8 a0 fe ff ff 48 8d a9 a0 fe ff ff 49 39 c4 75 26 eb 47 e8 ed c1 66 ff <48> 8b 85 60 01 00 00 48 8d 95 60 01 00 00 48 89 ef 48 2d 60 01 00 RSP: 0000:ffffc90000bcfd00 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88800edad000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: ffffc90000bcfc30 RDI: 00000000ffffffff RBP: fffffffffffffea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffff88800edad050 R13: ffff8880065f8f88 R14: 0000000000000000 R15: ffff8880066c6680 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000e998c006 CR4: 00000000003706e0 Call Trace: <TASK> xennet_remove+0x13d/0x300 [xen_netfront] xenbus_dev_remove+0x6d/0xf0 __device_release_driver+0x17a/0x240 device_release_driver+0x24/0x30 bus_remove_device+0xd8/0x140 device_del+0x18b/0x410 ? _raw_spin_unlock+0x16/0x30 ? klist_iter_exit+0x14/0x20 ? xenbus_dev_request_and_reply+0x80/0x80 device_unregister+0x13/0x60 xenbus_dev_changed+0x18e/0x1f0 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Fix this by calling xennet_destroy_queues() from xennet_uninit(), when real_num_tx_queues is still available. This ensures that queues are destroyed when real_num_tx_queues is set to 0, regardless of how unregister_netdev() was called. Originally reported at QubesOS/qubes-issues#7257 Fixes: d7dac08 ("net-sysfs: update the queue counts in the unregistration path") Cc: stable@vger.kernel.org Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2d327a7 upstream. My latest patch, attempting to fix the refcount leak in a minimal way turned out to add a new bug. Whenever the bind operation fails before we attempt to grab a reference count on a device, we might release the device refcount of a prior successful bind() operation. syzbot was not happy about this [1]. Note to stable teams: Make sure commit b37a466 ("netdevice: add the case if dev is NULL") is already present in your trees. [1] general protection fault, probably for non-canonical address 0xdffffc0000000070: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387] CPU: 1 PID: 3590 Comm: syz-executor361 Tainted: G W 5.17.0-syzkaller-04796-g169e77764adc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500 Code: 80 3c 02 00 0f 85 fc 07 00 00 4c 8b a5 38 05 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 80 03 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 a9 07 00 00 49 8b b4 24 80 03 00 00 4c 89 f2 48 RSP: 0018:ffffc900038cfcc0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8880756eb600 RCX: 0000000000000000 RDX: 0000000000000070 RSI: ffffc900038cfe3e RDI: 0000000000000380 RBP: ffff888015ee5000 R08: 0000000000000001 R09: ffff888015ee5535 R10: ffffed1002bdcaa6 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc900038cfe37 R14: ffffc900038cfe38 R15: ffff888015ee5012 FS: 0000555555acd300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000280 CR3: 0000000077db6000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __sys_connect_file+0x155/0x1a0 net/socket.c:1900 __sys_connect+0x161/0x190 net/socket.c:1917 __do_sys_connect net/socket.c:1927 [inline] __se_sys_connect net/socket.c:1924 [inline] __x64_sys_connect+0x6f/0xb0 net/socket.c:1924 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f016acb90b9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd417947f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f016acb90b9 RDX: 0000000000000010 RSI: 0000000020000140 RDI: 0000000000000003 RBP: 00007f016ac7d0a0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f016ac7d130 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:llc_ui_connect+0x400/0xcb0 net/llc/af_llc.c:500 Fixes: 764f4eb ("llc: fix netdevice reference leaks in llc_ui_bind()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: 赵子轩 <beraphin@gmail.com> Cc: Stoyan Manolov <smanolov@suse.de> Link: https://lore.kernel.org/r/20220325035827.360418-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 680af5b upstream. cnt should be passed to sb_has_quota_active() instead of type to check active quota properly. Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]): [ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs Fixes: 9de71ed ("f2fs: quota: fix potential deadlock") Cc: <stable@vger.kernel.org> # v5.15+ Signed-off-by: Juhyung Park <qkrwngud825@gmail.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ddbc84f upstream. ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not enough room for ZONE_MOVABLE on that node. Unfortunately this condition is not checked for. This leads to zone_movable_pfn[] getting set to a pfn greater than the last pfn in a node. calculate_node_totalpages() then sets zone->present_pages to be greater than zone->spanned_pages which is invalid, as spanned_pages represents the maximum number of pages in a zone assuming no holes. Subsequently it is possible free_area_init_core() will observe a zone of size zero with present pages. In this case it will skip setting up the zone, including the initialisation of free_lists[]. However populated_zone() checks zone->present_pages to see if a zone has memory available. This is used by iterators such as walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the free_list of each zone in each node, which are assumed to be initialised due to the zone not being empty. As free_area_init_core() never initialised the free_lists[] this results in the following kernel crash when trying to read /proc/pagetypeinfo: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 torvalds#461 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:pagetypeinfo_show+0x163/0x460 Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82 RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003 RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00 R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000 FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0 Call Trace: seq_read_iter+0x128/0x460 proc_reg_read_iter+0x51/0x80 new_sync_read+0x113/0x1a0 vfs_read+0x136/0x1d0 ksys_read+0x70/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by checking that the aligned zone_movable_pfn[] does not exceed the end of the node, and if it does skip creating a movable zone on this node. Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com Fixes: 2a1e274 ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bfc8089 upstream. When we use HW-tag based kasan and enable vmalloc support, we hit the following bug. It is due to comparison between tagged object and non-tagged pointer. We need to reset the kasan tag when we need to compare tagged object and non-tagged pointer. kmemleak: [name:kmemleak&]Scan area larger than object 0xffffffe77076f440 CPU: 4 PID: 1 Comm: init Tainted: G S W 5.15.25-android13-0-g5cacf919c2bc #1 Hardware name: MT6983(ENG) (DT) Call trace: add_scan_area+0xc4/0x244 kmemleak_scan_area+0x40/0x9c layout_and_allocate+0x1e8/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 kmemleak: [name:kmemleak&]Object 0xf5ffffe77076b000 (size 32768): kmemleak: [name:kmemleak&] comm "init", pid 1, jiffies 4294894197 kmemleak: [name:kmemleak&] min_count = 0 kmemleak: [name:kmemleak&] count = 0 kmemleak: [name:kmemleak&] flags = 0x1 kmemleak: [name:kmemleak&] checksum = 0 kmemleak: [name:kmemleak&] backtrace: module_alloc+0x9c/0x120 move_module+0x34/0x19c layout_and_allocate+0x1c4/0x288 load_module+0x2c8/0xf00 __se_sys_finit_module+0x190/0x1d0 __arm64_sys_finit_module+0x20/0x30 invoke_syscall+0x60/0x170 el0_svc_common+0xc8/0x114 do_el0_svc+0x28/0xa0 el0_svc+0x60/0xf8 el0t_64_sync_handler+0x88/0xec el0t_64_sync+0x1b4/0x1b8 Link: https://lkml.kernel.org/r/20220318034051.30687-1-Kuan-Ying.Lee@mediatek.com Signed-off-by: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Nicholas Tang <nicholas.tang@mediatek.com> Cc: Yee Lee <yee.lee@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 2fef99b ] This patch fixes xfstests/generic/475 failure. [ 293.680694] F2FS-fs (dm-1): May loss orphan inode, run fsck to fix. [ 293.685358] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691527] Buffer I/O error on dev dm-1, logical block 8388592, async page read [ 293.691764] sh (7615): drop_caches: 3 [ 293.691819] sh (7616): drop_caches: 3 [ 293.694017] Buffer I/O error on dev dm-1, logical block 1, async page read [ 293.695659] sh (7618): drop_caches: 3 [ 293.696979] sh (7617): drop_caches: 3 [ 293.700290] sh (7623): drop_caches: 3 [ 293.708621] sh (7626): drop_caches: 3 [ 293.711386] sh (7628): drop_caches: 3 [ 293.711825] sh (7627): drop_caches: 3 [ 293.716738] sh (7630): drop_caches: 3 [ 293.719613] sh (7632): drop_caches: 3 [ 293.720971] sh (7633): drop_caches: 3 [ 293.727741] sh (7634): drop_caches: 3 [ 293.730783] sh (7636): drop_caches: 3 [ 293.732681] sh (7635): drop_caches: 3 [ 293.732988] sh (7637): drop_caches: 3 [ 293.738836] sh (7639): drop_caches: 3 [ 293.740568] sh (7641): drop_caches: 3 [ 293.743053] sh (7640): drop_caches: 3 [ 293.821889] ------------[ cut here ]------------ [ 293.824654] kernel BUG at fs/f2fs/node.c:3334! [ 293.826226] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 293.828713] CPU: 0 PID: 7653 Comm: umount Tainted: G OE 5.17.0-rc1-custom #1 [ 293.830946] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 [ 293.832526] RIP: 0010:f2fs_destroy_node_manager+0x33f/0x350 [f2fs] [ 293.833905] Code: e8 d6 3d f9 f9 48 8b 45 d0 65 48 2b 04 25 28 00 00 00 75 1a 48 81 c4 28 03 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b [ 293.837783] RSP: 0018:ffffb04ec31e7a20 EFLAGS: 00010202 [ 293.839062] RAX: 0000000000000001 RBX: ffff9df947db2eb8 RCX: 0000000080aa0072 [ 293.840666] RDX: 0000000000000000 RSI: ffffe86c0432a140 RDI: ffffffffc0b72a21 [ 293.842261] RBP: ffffb04ec31e7d70 R08: ffff9df94ca85780 R09: 0000000080aa0072 [ 293.843909] R10: ffff9df94ca85700 R11: ffff9df94e1ccf58 R12: ffff9df947db2e00 [ 293.845594] R13: ffff9df947db2ed0 R14: ffff9df947db2eb8 R15: ffff9df947db2eb8 [ 293.847855] FS: 00007f5a97379800(0000) GS:ffff9dfa77c00000(0000) knlGS:0000000000000000 [ 293.850647] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 293.852940] CR2: 00007f5a97528730 CR3: 000000010bc76005 CR4: 0000000000370ef0 [ 293.854680] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 293.856423] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 293.858380] Call Trace: [ 293.859302] <TASK> [ 293.860311] ? ttwu_do_wakeup+0x1c/0x170 [ 293.861800] ? ttwu_do_activate+0x6d/0xb0 [ 293.863057] ? _raw_spin_unlock_irqrestore+0x29/0x40 [ 293.864411] ? try_to_wake_up+0x9d/0x5e0 [ 293.865618] ? debug_smp_processor_id+0x17/0x20 [ 293.866934] ? debug_smp_processor_id+0x17/0x20 [ 293.868223] ? free_unref_page+0xbf/0x120 [ 293.869470] ? __free_slab+0xcb/0x1c0 [ 293.870614] ? preempt_count_add+0x7a/0xc0 [ 293.871811] ? __slab_free+0xa0/0x2d0 [ 293.872918] ? __wake_up_common_lock+0x8a/0xc0 [ 293.874186] ? __slab_free+0xa0/0x2d0 [ 293.875305] ? free_inode_nonrcu+0x20/0x20 [ 293.876466] ? free_inode_nonrcu+0x20/0x20 [ 293.877650] ? debug_smp_processor_id+0x17/0x20 [ 293.878949] ? call_rcu+0x11a/0x240 [ 293.880060] ? f2fs_destroy_stats+0x59/0x60 [f2fs] [ 293.881437] ? kfree+0x1fe/0x230 [ 293.882674] f2fs_put_super+0x160/0x390 [f2fs] [ 293.883978] generic_shutdown_super+0x7a/0x120 [ 293.885274] kill_block_super+0x27/0x50 [ 293.886496] kill_f2fs_super+0x7f/0x100 [f2fs] [ 293.887806] deactivate_locked_super+0x35/0xa0 [ 293.889271] deactivate_super+0x40/0x50 [ 293.890513] cleanup_mnt+0x139/0x190 [ 293.891689] __cleanup_mnt+0x12/0x20 [ 293.892850] task_work_run+0x64/0xa0 [ 293.894035] exit_to_user_mode_prepare+0x1b7/0x1c0 [ 293.895409] syscall_exit_to_user_mode+0x27/0x50 [ 293.896872] do_syscall_64+0x48/0xc0 [ 293.898090] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 293.899517] RIP: 0033:0x7f5a975cd25b Fixes: 7735730 ("f2fs: fix to propagate error from __get_meta_page()") Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit de2ae40 ] is_xen_pmu() is taking the cpu number as parameter, but it is not using it. Instead it just tests whether the Xen PMU initialization on the current cpu did succeed. As this test is done by checking a percpu pointer, preemption needs to be disabled in order to avoid switching the cpu while doing the test. While resuming from suspend() this seems not to be the case: [ 88.082751] ACPI: PM: Low-level resume complete [ 88.087933] ACPI: EC: EC started [ 88.091464] ACPI: PM: Restoring platform NVS memory [ 88.097166] xen_acpi_processor: Uploading Xen processor PM info [ 88.103850] Enabling non-boot CPUs ... [ 88.108128] installing Xen timer for CPU 1 [ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138 [ 88.122256] caller is is_xen_pmu+0x12/0x30 [ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1 [ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022 [ 88.145930] Call Trace: [ 88.148757] <TASK> [ 88.151193] dump_stack_lvl+0x48/0x5e [ 88.155381] check_preemption_disabled+0xde/0xe0 [ 88.160641] is_xen_pmu+0x12/0x30 [ 88.164441] xen_smp_intr_init_pv+0x75/0x100 Fix that by replacing is_xen_pmu() by a simple boolean variable which reflects the Xen PMU initialization state on cpu 0. Modify xen_pmu_init() to return early in case it is being called for a cpu other than cpu 0 and the boolean variable not being set. Fixes: bf6dfb1 ("xen/PMU: PMU emulation code") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 37a1a2e ] Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites. CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name); Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer. Cc: Antonino Daplas <adaplas@gmail.com> Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5c6f402 ] Do a sanity check on pixclock value to avoid divide by zero. If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible. Syzkaller reported a divide error in cirrusfb_check_pixclock. divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260 Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a60447e upstream. [ 12.323788] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-udevd/1020 [ 12.332297] caller is qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.338417] CPU: 7 PID: 1020 Comm: systemd-udevd Tainted: G I --------- --- 5.14.0-29.el9.x86_64 #1 [ 12.348827] Hardware name: Dell Inc. PowerEdge R610/0F0XJ6, BIOS 6.6.0 05/22/2018 [ 12.356356] Call Trace: [ 12.358821] dump_stack_lvl+0x34/0x44 [ 12.362514] check_preemption_disabled+0xd9/0xe0 [ 12.367164] qla2xxx_create_qpair+0x32a/0x5d0 [qla2xxx] [ 12.372481] qla2x00_probe_one+0xa3a/0x1b80 [qla2xxx] [ 12.377617] ? _raw_spin_lock_irqsave+0x19/0x40 [ 12.384284] local_pci_probe+0x42/0x80 [ 12.390162] ? pci_match_device+0xd7/0x110 [ 12.396366] pci_device_probe+0xfd/0x1b0 [ 12.402372] really_probe+0x1e7/0x3e0 [ 12.408114] __driver_probe_device+0xfe/0x180 [ 12.414544] driver_probe_device+0x1e/0x90 [ 12.420685] __driver_attach+0xc0/0x1c0 [ 12.426536] ? __device_attach_driver+0xe0/0xe0 [ 12.433061] ? __device_attach_driver+0xe0/0xe0 [ 12.439538] bus_for_each_dev+0x78/0xc0 [ 12.445294] bus_add_driver+0x12b/0x1e0 [ 12.451021] driver_register+0x8f/0xe0 [ 12.456631] ? 0xffffffffc07bc000 [ 12.461773] qla2x00_module_init+0x1be/0x229 [qla2xxx] [ 12.468776] do_one_initcall+0x44/0x200 [ 12.474401] ? load_module+0xad3/0xba0 [ 12.479908] ? kmem_cache_alloc_trace+0x45/0x410 [ 12.486268] do_init_module+0x5c/0x280 [ 12.491730] __do_sys_init_module+0x12e/0x1b0 [ 12.497785] do_syscall_64+0x3b/0x90 [ 12.503029] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 12.509764] RIP: 0033:0x7f554f73ab2e Link: https://lore.kernel.org/r/20220110050218.3958-15-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit b7fb0ae upstream. Do not call snd_dma_free_pages() when snd_dma_alloc_pages() returns -ENOMEM because it leads to a NULL pointer dereference bug. The dmesg says: [ T1387] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12 [ T1387] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ T1387] #PF: supervisor read access in kernel mode [ T1387] #PF: error_code(0x0000) - not-present page [ T1387] PGD 0 P4D 0 [ T1387] Oops: 0000 [#1] PREEMPT SMP NOPTI [ T1387] CPU: 6 PID: 1387 Comm: alsa-sink-HDA A Tainted: G W 5.17.0-rc4-superb-owl-00055-g80d47f5de5e3 [ T1387] Hardware name: HP HP Laptop 14s-dq2xxx/87FD, BIOS F.15 09/15/2021 [ T1387] RIP: 0010:dma_free_noncontiguous+0x37/0x80 [ T1387] Code: [... snip ...] [ T1387] RSP: 0000:ffffc90002b87770 EFLAGS: 00010246 [ T1387] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ T1387] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888101db30d0 [ T1387] RBP: 00000000fffffff4 R08: 0000000000000000 R09: 0000000000000000 [ T1387] R10: 0000000000000000 R11: ffffc90002b874d0 R12: 0000000000000001 [ T1387] R13: 0000000000058000 R14: ffff888105260c68 R15: ffff888105260828 [ T1387] FS: 00007f42e2ffd640(0000) GS:ffff888466b80000(0000) knlGS:0000000000000000 [ T1387] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ T1387] CR2: 0000000000000000 CR3: 000000014acf0003 CR4: 0000000000770ee0 [ T1387] PKRU: 55555554 [ T1387] Call Trace: [ T1387] <TASK> [ T1387] cl_stream_prepare+0x10a/0x120 [snd_sof_intel_hda_common 146addf995b9279ae7f509621078cccbe4f875e1] [... snip ...] [ T1387] </TASK> Cc: Daniel Baluta <daniel.baluta@nxp.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: Keyon Jie <yang.jie@linux.intel.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Rander Wang <rander.wang@intel.com> Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Cc: Takashi Iwai <tiwai@suse.com> Cc: sound-open-firmware@alsa-project.org Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org # v5.2+ Fixes: d16046f ("ASoC: SOF: Intel: Add Intel specific HDA firmware loader") Link: https://lore.kernel.org/lkml/20220224145124.15985-1-ammarfaizi2@gnuweeb.org/ # v1 Link: https://lore.kernel.org/lkml/20220224180850.34592-1-ammarfaizi2@gnuweeb.org/ # v2 Link: https://lore.kernel.org/lkml/20220224182818.40301-1-ammarfaizi2@gnuweeb.org/ # v3 Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Link: https://lore.kernel.org/r/20220224185836.44907-1-ammarfaizi2@gnuweeb.org Signed-off-by: Mark Brown <broonie@kernel.org> [ammarfaizi2: Backport to Linux 5.4 LTS] Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3e3c658 upstream. If there is already an entry present that is of order >= XA_CHUNK_SHIFT when we call xas_create_range(), xas_create_range() will misinterpret that entry as a node and dereference xa_node->parent, generally leading to a crash that looks something like this: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 PID: 32 Comm: khugepaged Not tainted 5.17.0-rc8-syzkaller-00003-g56e337f2cf13 #0 RIP: 0010:xa_parent_locked include/linux/xarray.h:1207 [inline] RIP: 0010:xas_create_range+0x2d9/0x6e0 lib/xarray.c:725 It's deterministically reproducable once you know what the problem is, but producing it in a live kernel requires khugepaged to hit a race. While the problem has been present since xas_create_range() was introduced, I'm not aware of a way to hit it before the page cache was converted to use multi-index entries. Fixes: 6b24ca4 ("mm: Use multi-index entries in the page cache") Reported-by: syzbot+0d2b0bf32ca5cfd09f2e@syzkaller.appspotmail.com Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit dd75080 upstream. The shadow's page table is not updated when PTE_RPN_SHIFT is 24 and PAGE_SHIFT is 12. It not only causes false positives but also false negative as shown the following text. Fix it by bringing the logic of kasan_early_shadow_page_entry here. 1. False Positive: ================================================================== BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50 Write of size 16 at addr f57f3be0 by task swapper/0/1 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1 Call Trace: [c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable) [c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300 [c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200 [c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0 [c80d1cc0] [c03018a4] memset+0x34/0x90 [c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50 [c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570 [c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0 [c80d1db0] [c2036580] init_sd+0xc4/0x1d0 [c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c [c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384 [c80d1ef0] [c0004b14] kernel_init+0x24/0x170 [c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64 Memory state around the buggy address: f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 >f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ================================================================== 2. False Negative (with KASAN tests): ================================================================== Before fix: ok 45 - kmalloc_double_kzfree # vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039 KASAN failure expected in "((volatile char *)area)[3100]", but none occurred not ok 46 - vmalloc_oob not ok 1 - kasan ================================================================== After fix: ok 1 - kasan Fixes: cbd1899 ("powerpc/mm: Fix an Oops in kasan_mmu_init()") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211229035226.59159-1-chenjingwen6@huawei.com [chleroy: Backport for 5.4] Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 564d4ec ] The bug was found during fuzzing. Stacktrace locates it in ath5k_eeprom_convert_pcal_info_5111. When none of the curve is selected in the loop, idx can go up to AR5K_EEPROM_N_PD_CURVES. The line makes pd out of bound. pd = &chinfo[pier].pd_curves[idx]; There are many OOB writes using pd later in the code. So I added a sanity check for idx. Checks for other loops involving AR5K_EEPROM_N_PD_CURVES are not needed as the loop index is not used outside the loops. The patch is NOT tested with real device. The following is the fuzzing report BUG: KASAN: slab-out-of-bounds in ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] Write of size 1 at addr ffff8880174a4d60 by task modprobe/214 CPU: 0 PID: 214 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] __kasan_report.cold+0x37/0x7c ? ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] kasan_report+0xe/0x20 ath5k_eeprom_read_pcal_info_5111+0x126a/0x1390 [ath5k] ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? ath5k_pci_eeprom_read+0x228/0x3c0 [ath5k] ath5k_eeprom_init+0x2513/0x6290 [ath5k] ? ath5k_eeprom_init_11a_pcal_freq+0xbc0/0xbc0 [ath5k] ? usleep_range+0xb8/0x100 ? apic_timer_interrupt+0xa/0x20 ? ath5k_eeprom_read_pcal_info_2413+0x2f20/0x2f20 [ath5k] ath5k_hw_init+0xb60/0x1970 [ath5k] ath5k_init_ah+0x6fe/0x2530 [ath5k] ? kasprintf+0xa6/0xe0 ? ath5k_stop+0x140/0x140 [ath5k] ? _dev_notice+0xf6/0xf6 ? apic_timer_interrupt+0xa/0x20 ath5k_pci_probe.cold+0x29a/0x3d6 [ath5k] ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] ? mutex_lock+0x89/0xd0 ? ath5k_pci_eeprom_read+0x3c0/0x3c0 [ath5k] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0 ? pci_device_remove+0x280/0x280 ? pci_device_remove+0x280/0x280 really_probe+0x209/0x5d0 Reported-by: Brendan Dolan-Gavitt <brendandg@nyu.edu> Signed-off-by: Zekun Shen <bruceshenzk@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/YckvDdj3mtCkDRIt@a-10-27-26-18.dynapool.vpn.nyu.edu Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 447c799 ] Noticed the below warning while running a pytorch workload on vega10 GPUs. Change to trylock to avoid conflicts with already held reservation locks. [ +0.000003] WARNING: possible recursive locking detected [ +0.000003] 5.13.0-kfd-rajneesh #1030 Not tainted [ +0.000004] -------------------------------------------- [ +0.000002] python/4822 is trying to acquire lock: [ +0.000004] ffff932cd9a259f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000203] but task is already holding lock: [ +0.000003] ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000017] other info that might help us debug this: [ +0.000002] Possible unsafe locking scenario: [ +0.000003] CPU0 [ +0.000002] ---- [ +0.000002] lock(reservation_ww_class_mutex); [ +0.000004] lock(reservation_ww_class_mutex); [ +0.000003] *** DEADLOCK *** [ +0.000002] May be due to missing lock nesting notation [ +0.000003] 7 locks held by python/4822: [ +0.000003] #0: ffff932c4ac028d0 (&process->mutex){+.+.}-{3:3}, at: kfd_ioctl_map_memory_to_gpu+0x10b/0x320 [amdgpu] [ +0.000232] #1: ffff932c55e830a8 (&info->lock#2){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x64/0xf60 [amdgpu] [ +0.000241] #2: ffff932cc45b5e68 (&(*mem)->lock){+.+.}-{3:3}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0xdf/0xf60 [amdgpu] [ +0.000236] #3: ffffb2b35606fd28 (reservation_ww_class_acquire){+.+.}-{0:0}, at: amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x232/0xf60 [amdgpu] [ +0.000235] #4: ffff932cbb7181f8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: ttm_eu_reserve_buffers+0x270/0x470 [ttm] [ +0.000015] #5: ffffffffc045f700 (*(sspp++)){....}-{0:0}, at: drm_dev_enter+0x5/0xa0 [drm] [ +0.000038] #6: ffff932c52da7078 (&vm->eviction_lock){+.+.}-{3:3}, at: amdgpu_vm_bo_update_mapping+0xd5/0x4f0 [amdgpu] [ +0.000195] stack backtrace: [ +0.000003] CPU: 11 PID: 4822 Comm: python Not tainted 5.13.0-kfd-rajneesh #1030 [ +0.000005] Hardware name: GIGABYTE MZ01-CE0-00/MZ01-CE0-00, BIOS F02 08/29/2018 [ +0.000003] Call Trace: [ +0.000003] dump_stack+0x6d/0x89 [ +0.000010] __lock_acquire+0xb93/0x1a90 [ +0.000009] lock_acquire+0x25d/0x2d0 [ +0.000005] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000184] __ww_mutex_lock.constprop.17+0xca/0x1060 [ +0.000007] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] ? lock_release+0x13f/0x270 [ +0.000005] ? lock_is_held_type+0xa2/0x110 [ +0.000006] ? amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000183] amdgpu_bo_release_notify+0xc4/0x160 [amdgpu] [ +0.000185] ttm_bo_release+0x4c6/0x580 [ttm] [ +0.000010] amdgpu_bo_unref+0x1a/0x30 [amdgpu] [ +0.000183] amdgpu_vm_free_table+0x76/0xa0 [amdgpu] [ +0.000189] amdgpu_vm_free_pts+0xb8/0xf0 [amdgpu] [ +0.000189] amdgpu_vm_update_ptes+0x411/0x770 [amdgpu] [ +0.000191] amdgpu_vm_bo_update_mapping+0x324/0x4f0 [amdgpu] [ +0.000191] amdgpu_vm_bo_update+0x251/0x610 [amdgpu] [ +0.000191] update_gpuvm_pte+0xcc/0x290 [amdgpu] [ +0.000229] ? amdgpu_vm_bo_map+0xd7/0x130 [amdgpu] [ +0.000190] amdgpu_amdkfd_gpuvm_map_memory_to_gpu+0x912/0xf60 [amdgpu] [ +0.000234] kfd_ioctl_map_memory_to_gpu+0x182/0x320 [amdgpu] [ +0.000218] kfd_ioctl+0x2b9/0x600 [amdgpu] [ +0.000216] ? kfd_ioctl_unmap_memory_from_gpu+0x270/0x270 [amdgpu] [ +0.000216] ? lock_release+0x13f/0x270 [ +0.000006] ? __fget_files+0x107/0x1e0 [ +0.000007] __x64_sys_ioctl+0x8b/0xd0 [ +0.000007] do_syscall_64+0x36/0x70 [ +0.000004] entry_SYSCALL_64_after_hwframe+0x44/0xae [ +0.000007] RIP: 0033:0x7fbff90a7317 [ +0.000004] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48 [ +0.000005] RSP: 002b:00007fbe301fe648 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [ +0.000006] RAX: ffffffffffffffda RBX: 00007fbcc402d820 RCX: 00007fbff90a7317 [ +0.000003] RDX: 00007fbe301fe690 RSI: 00000000c0184b18 RDI: 0000000000000004 [ +0.000003] RBP: 00007fbe301fe690 R08: 0000000000000000 R09: 00007fbcc402d880 [ +0.000003] R10: 0000000002001000 R11: 0000000000000246 R12: 00000000c0184b18 [ +0.000003] R13: 0000000000000004 R14: 00007fbf689593a0 R15: 00007fbcc402d820 Cc: Christian König <christian.koenig@amd.com> Cc: Felix Kuehling <Felix.Kuehling@amd.com> Cc: Alex Deucher <Alexander.Deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

Will reports that with CONFIG_EXPERT=y and CONFIG_HARDEN_BRANCH_PREDICTOR=n, the kernel dereferences a NULL pointer during boot: [ 2.384444] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 2.384461] pstate: 20400085 (nzCv daIf +PAN -UAO) [ 2.384472] pc : cpu_hyp_reinit+0x114/0x30c [ 2.384476] lr : cpu_hyp_reinit+0x80/0x30c [ 2.384529] Call trace: [ 2.384533] cpu_hyp_reinit+0x114/0x30c [ 2.384537] _kvm_arch_hardware_enable+0x30/0x54 [ 2.384541] flush_smp_call_function_queue+0xe4/0x154 [ 2.384544] generic_smp_call_function_single_interrupt+0x10/0x18 [ 2.384549] ipi_handler+0x170/0x2b0 [ 2.384555] handle_percpu_devid_fasteoi_ipi+0x120/0x1cc [ 2.384560] __handle_domain_irq+0x9c/0xf4 [ 2.384563] gic_handle_irq+0x6c/0xe4 [ 2.384566] el1_irq+0xf0/0x1c0 [ 2.384570] arch_cpu_idle+0x28/0x44 [ 2.384574] do_idle+0x100/0x2a8 [ 2.384577] cpu_startup_entry+0x20/0x24 [ 2.384581] secondary_start_kernel+0x1b0/0x1cc [ 2.384589] Code: b9469d08 7100011f 540003ad 52800208 (f9400108) [ 2.384600] ---[ end trace 266d08dbf96ff143 ]--- [ 2.385171] Kernel panic - not syncing: Fatal exception in interrupt In this configuration arm64_get_bp_hardening_data() returns NULL. Add a check in kvm_get_hyp_vector(). Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/linux-arm-kernel/20220408120041.GB27685@willie-the-truck/ Fixes: 26129ea ("KVM: arm64: Add templates for BHB mitigation sequences") Cc: stable@vger.kernel.org # 5.4.x Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6bf92d7 ] FRR folks have hit a kernel warning[1] while deleting routes[2] which is caused by trying to delete a route pointing to a nexthop id without specifying nhid but matching on an interface. That is, a route is found but we hit a warning while matching it. The warning is from fib_info_nh() in include/net/nexthop.h because we run it on a fib_info with nexthop object. The call chain is: inet_rtm_delroute -> fib_table_delete -> fib_nh_match (called with a nexthop fib_info and also with fc_oif set thus calling fib_info_nh on the fib_info and triggering the warning). The fix is to not do any matching in that branch if the fi has a nexthop object because those are managed separately. I.e. we should match when deleting without nh spec and should fail when deleting a nexthop route with old-style nh spec because nexthop objects are managed separately, e.g.: $ ip r show 1.2.3.4/32 1.2.3.4 nhid 12 via 192.168.11.2 dev dummy0 $ ip r del 1.2.3.4/32 $ ip r del 1.2.3.4/32 nhid 12 <both should work> $ ip r del 1.2.3.4/32 dev dummy0 <should fail with ESRCH> [1] [ 523.462226] ------------[ cut here ]------------ [ 523.462230] WARNING: CPU: 14 PID: 22893 at include/net/nexthop.h:468 fib_nh_match+0x210/0x460 [ 523.462236] Modules linked in: dummy rpcsec_gss_krb5 xt_socket nf_socket_ipv4 nf_socket_ipv6 ip6table_raw iptable_raw bpf_preload xt_statistic ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs xt_mark nf_tables xt_nat veth nf_conntrack_netlink nfnetlink xt_addrtype br_netfilter overlay dm_crypt nfsv3 nfs fscache netfs vhost_net vhost vhost_iotlb tap tun xt_CHECKSUM xt_MASQUERADE xt_conntrack 8021q garp mrp ipt_REJECT nf_reject_ipv4 ip6table_mangle ip6table_nat iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bridge stp llc rfcomm snd_seq_dummy snd_hrtimer rpcrdma rdma_cm iw_cm ib_cm ib_core ip6table_filter xt_comment ip6_tables vboxnetadp(OE) vboxnetflt(OE) vboxdrv(OE) qrtr bnep binfmt_misc xfs vfat fat squashfs loop nvidia_drm(POE) nvidia_modeset(POE) nvidia_uvm(POE) nvidia(POE) intel_rapl_msr intel_rapl_common snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio snd_hda_codec_hdmi btusb btrtl iwlmvm uvcvideo btbcm snd_hda_intel edac_mce_amd [ 523.462274] videobuf2_vmalloc videobuf2_memops btintel snd_intel_dspcfg videobuf2_v4l2 snd_intel_sdw_acpi bluetooth snd_usb_audio snd_hda_codec mac80211 snd_usbmidi_lib joydev snd_hda_core videobuf2_common kvm_amd snd_rawmidi snd_hwdep snd_seq videodev ccp snd_seq_device libarc4 ecdh_generic mc snd_pcm kvm iwlwifi snd_timer drm_kms_helper snd cfg80211 cec soundcore irqbypass rapl wmi_bmof i2c_piix4 rfkill k10temp pcspkr acpi_cpufreq nfsd auth_rpcgss nfs_acl lockd grace sunrpc drm zram ip_tables crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel nvme sp5100_tco r8169 nvme_core wmi ipmi_devintf ipmi_msghandler fuse [ 523.462300] CPU: 14 PID: 22893 Comm: ip Tainted: P OE 5.16.18-200.fc35.x86_64 #1 [ 523.462302] Hardware name: Micro-Star International Co., Ltd. MS-7C37/MPG X570 GAMING EDGE WIFI (MS-7C37), BIOS 1.C0 10/29/2020 [ 523.462303] RIP: 0010:fib_nh_match+0x210/0x460 [ 523.462304] Code: 7c 24 20 48 8b b5 90 00 00 00 e8 bb ee f4 ff 48 8b 7c 24 20 41 89 c4 e8 ee eb f4 ff 45 85 e4 0f 85 2e fe ff ff e9 4c ff ff ff <0f> 0b e9 17 ff ff ff 3c 0a 0f 85 61 fe ff ff 48 8b b5 98 00 00 00 [ 523.462306] RSP: 0018:ffffaa53d4d87928 EFLAGS: 00010286 [ 523.462307] RAX: 0000000000000000 RBX: ffffaa53d4d87a90 RCX: ffffaa53d4d87bb0 [ 523.462308] RDX: ffff9e3d2ee6be80 RSI: ffffaa53d4d87a90 RDI: ffffffff920ed380 [ 523.462309] RBP: ffff9e3d2ee6be80 R08: 0000000000000064 R09: 0000000000000000 [ 523.462310] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000031 [ 523.462310] R13: 0000000000000020 R14: 0000000000000000 R15: ffff9e3d331054e0 [ 523.462311] FS: 00007f245517c1c0(0000) GS:ffff9e492ed80000(0000) knlGS:0000000000000000 [ 523.462313] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 523.462313] CR2: 000055e5dfdd8268 CR3: 00000003ef488000 CR4: 0000000000350ee0 [ 523.462315] Call Trace: [ 523.462316] <TASK> [ 523.462320] fib_table_delete+0x1a9/0x310 [ 523.462323] inet_rtm_delroute+0x93/0x110 [ 523.462325] rtnetlink_rcv_msg+0x133/0x370 [ 523.462327] ? _copy_to_iter+0xb5/0x6f0 [ 523.462330] ? rtnl_calcit.isra.0+0x110/0x110 [ 523.462331] netlink_rcv_skb+0x50/0xf0 [ 523.462334] netlink_unicast+0x211/0x330 [ 523.462336] netlink_sendmsg+0x23f/0x480 [ 523.462338] sock_sendmsg+0x5e/0x60 [ 523.462340] ____sys_sendmsg+0x22c/0x270 [ 523.462341] ? import_iovec+0x17/0x20 [ 523.462343] ? sendmsg_copy_msghdr+0x59/0x90 [ 523.462344] ? __mod_lruvec_page_state+0x85/0x110 [ 523.462348] ___sys_sendmsg+0x81/0xc0 [ 523.462350] ? netlink_seq_start+0x70/0x70 [ 523.462352] ? __dentry_kill+0x13a/0x180 [ 523.462354] ? __fput+0xff/0x250 [ 523.462356] __sys_sendmsg+0x49/0x80 [ 523.462358] do_syscall_64+0x3b/0x90 [ 523.462361] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 523.462364] RIP: 0033:0x7f24552aa337 [ 523.462365] Code: 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 523.462366] RSP: 002b:00007fff7f05a838 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 523.462368] RAX: ffffffffffffffda RBX: 000000006245bf91 RCX: 00007f24552aa337 [ 523.462368] RDX: 0000000000000000 RSI: 00007fff7f05a8a0 RDI: 0000000000000003 [ 523.462369] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 523.462370] R10: 0000000000000008 R11: 0000000000000246 R12: 0000000000000001 [ 523.462370] R13: 00007fff7f05ce08 R14: 0000000000000000 R15: 000055e5dfdd1040 [ 523.462373] </TASK> [ 523.462374] ---[ end trace ba537bc16f6bf4ed ]--- [2] FRRouting/frr#6412 Fixes: 4c7e808 ("ipv4: Plumb support for nexthop object in a fib_info") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7aa8104 upstream. the driver uses libata's "tag" values from in various arrays. Since the mentioned patch bumped the ATA_TAG_INTERNAL to 32, the value of the SATA_DWC_QCMD_MAX needs to account for that. Otherwise ATA_TAG_INTERNAL usage cause similar crashes like this as reported by Tice Rex on the OpenWrt Forum and reproduced (with symbols) here: | BUG: Kernel NULL pointer dereference at 0x00000000 | Faulting instruction address: 0xc03ed4b8 | Oops: Kernel access of bad area, sig: 11 [#1] | BE PAGE_SIZE=4K PowerPC 44x Platform | CPU: 0 PID: 362 Comm: scsi_eh_1 Not tainted 5.4.163 #0 | NIP: c03ed4b8 LR: c03d27e8 CTR: c03ed36c | REGS: cfa59950 TRAP: 0300 Not tainted (5.4.163) | MSR: 00021000 <CE,ME> CR: 42000222 XER: 00000000 | DEAR: 00000000 ESR: 00000000 | GPR00: c03d27e8 cfa59a08 cfa55fe0 00000000 0fa46bc0 [...] | [..] | NIP [c03ed4b8] sata_dwc_qc_issue+0x14c/0x254 | LR [c03d27e8] ata_qc_issue+0x1c8/0x2dc | Call Trace: | [cfa59a08] [c003f4e0] __cancel_work_timer+0x124/0x194 (unreliable) | [cfa59a78] [c03d27e8] ata_qc_issue+0x1c8/0x2dc | [cfa59a98] [c03d2b3c] ata_exec_internal_sg+0x240/0x524 | [cfa59b08] [c03d2e98] ata_exec_internal+0x78/0xe0 | [cfa59b58] [c03d30fc] ata_read_log_page.part.38+0x1dc/0x204 | [cfa59bc8] [c03d324c] ata_identify_page_supported+0x68/0x130 | [...] This is because sata_dwc_dma_xfer_complete() NULLs the dma_pending's next neighbour "chan" (a *dma_chan struct) in this '32' case right here (line ~735): > hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE; Then the next time, a dma gets issued; dma_dwc_xfer_setup() passes the NULL'd hsdevp->chan to the dmaengine_slave_config() which then causes the crash. With this patch, SATA_DWC_QCMD_MAX is now set to ATA_MAX_QUEUE + 1. This avoids the OOB. But please note, there was a worthwhile discussion on what ATA_TAG_INTERNAL and ATA_MAX_QUEUE is. And why there should not be a "fake" 33 command-long queue size. Ideally, the dw driver should account for the ATA_TAG_INTERNAL. In Damien Le Moal's words: "... having looked at the driver, it is a bigger change than just faking a 33rd "tag" that is in fact not a command tag at all." Fixes: 28361c4 ("libata: add extra internal command") Cc: stable@kernel.org # 4.18+ BugLink: openwrt/openwrt#9505 Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 23c2d49 upstream. The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 torvalds#33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83a1cde upstream. With newer versions of GCC, there is a panic in da850_evm_config_emac() when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine: Unable to handle kernel NULL pointer dereference at virtual address 00000020 pgd = (ptrval) [00000020] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1 Hardware name: Generic DT based system PC is at da850_evm_config_emac+0x1c/0x120 LR is at do_one_initcall+0x50/0x1e0 The emac_pdata pointer in soc_info is NULL because davinci_soc_info only gets populated on davinci machines but da850_evm_config_emac() is called on all machines via device_initcall(). Move the rmii_en assignment below the machine check so that it is only dereferenced when running on a supported SoC. Fixes: bae1058 ("davinci: DA850/OMAP-L138 EVM: implement autodetect of RMII PHY") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/YcS4xVWs6bQlQSPC@archlinux-ax161/ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c80a29f ] Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838 ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <vinschen@redhat.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit c186f08 upstream. We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ================================================================== BUG: KASAN: use-after-free in ext4_search_dir fs/ext4/namei.c:1394 [inline] BUG: KASAN: use-after-free in search_dirblock fs/ext4/namei.c:1199 [inline] BUG: KASAN: use-after-free in __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553 Read of size 1 at addr ffff8881317c3005 by task syz-executor117/2331 CPU: 1 PID: 2331 Comm: syz-executor117 Not tainted 5.10.0+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:83 [inline] dump_stack+0x144/0x187 lib/dump_stack.c:124 print_address_description+0x7d/0x630 mm/kasan/report.c:387 __kasan_report+0x132/0x190 mm/kasan/report.c:547 kasan_report+0x47/0x60 mm/kasan/report.c:564 ext4_search_dir fs/ext4/namei.c:1394 [inline] search_dirblock fs/ext4/namei.c:1199 [inline] __ext4_find_entry+0xdca/0x1210 fs/ext4/namei.c:1553 ext4_lookup_entry fs/ext4/namei.c:1622 [inline] ext4_lookup+0xb8/0x3a0 fs/ext4/namei.c:1690 __lookup_hash+0xc5/0x190 fs/namei.c:1451 do_rmdir+0x19e/0x310 fs/namei.c:3760 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x445e59 Code: 4d c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 1b c7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff2277fac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000054 RAX: ffffffffffffffda RBX: 0000000000400280 RCX: 0000000000445e59 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000200000c0 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000002 R10: 00007fff2277f990 R11: 0000000000000246 R12: 0000000000000000 R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:0000000048cd3304 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x1317c3 flags: 0x200000000000000() raw: 0200000000000000 ffffea0004526588 ffffea0004528088 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8881317c2f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8881317c2f80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff8881317c3000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff8881317c3080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff8881317c3100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== ext4_search_dir: ... de = (struct ext4_dir_entry_2 *)search_buf; dlimit = search_buf + buf_size; while ((char *) de < dlimit) { ... if ((char *) de + de->name_len <= dlimit && ext4_match(dir, fname, de)) { ... } ... de_len = ext4_rec_len_from_disk(de->rec_len, dir->i_sb->s_blocksize); if (de_len <= 0) return -1; offset += de_len; de = (struct ext4_dir_entry_2 *) ((char *) de + de_len); } Assume: de=0xffff8881317c2fff dlimit=0x0xffff8881317c3000 If read 'de->name_len' which address is 0xffff8881317c3005, obviously is out of range, then will trigger use-after-free. To solve this issue, 'dlimit' must reserve 8 bytes, as we will read 'de->name_len' to judge if '(char *) de + de->name_len' out of range. Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220324064816.1209985-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… abort commit 23e3d7f upstream. we got issue as follows: [ 72.796117] EXT4-fs error (device sda): ext4_journal_check_start:83: comm fallocate: Detected aborted journal [ 72.826847] EXT4-fs (sda): Remounting filesystem read-only fallocate: fallocate failed: Read-only file system [ 74.791830] jbd2_journal_commit_transaction: jh=0xffff9cfefe725d90 bh=0x0000000000000000 end delay [ 74.793597] ------------[ cut here ]------------ [ 74.794203] kernel BUG at fs/jbd2/transaction.c:2063! [ 74.794886] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 74.795533] CPU: 4 PID: 2260 Comm: jbd2/sda-8 Not tainted 5.17.0-rc8-next-20220315-dirty torvalds#150 [ 74.798327] RIP: 0010:__jbd2_journal_unfile_buffer+0x3e/0x60 [ 74.801971] RSP: 0018:ffffa828c24a3cb8 EFLAGS: 00010202 [ 74.802694] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 74.803601] RDX: 0000000000000001 RSI: ffff9cfefe725d90 RDI: ffff9cfefe725d90 [ 74.804554] RBP: ffff9cfefe725d90 R08: 0000000000000000 R09: ffffa828c24a3b20 [ 74.805471] R10: 0000000000000001 R11: 0000000000000001 R12: ffff9cfefe725d90 [ 74.806385] R13: ffff9cfefe725d98 R14: 0000000000000000 R15: ffff9cfe833a4d00 [ 74.807301] FS: 0000000000000000(0000) GS:ffff9d01afb00000(0000) knlGS:0000000000000000 [ 74.808338] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 74.809084] CR2: 00007f2b81bf4000 CR3: 0000000100056000 CR4: 00000000000006e0 [ 74.810047] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 74.810981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 74.811897] Call Trace: [ 74.812241] <TASK> [ 74.812566] __jbd2_journal_refile_buffer+0x12f/0x180 [ 74.813246] jbd2_journal_refile_buffer+0x4c/0xa0 [ 74.813869] jbd2_journal_commit_transaction.cold+0xa1/0x148 [ 74.817550] kjournald2+0xf8/0x3e0 [ 74.819056] kthread+0x153/0x1c0 [ 74.819963] ret_from_fork+0x22/0x30 Above issue may happen as follows: write truncate kjournald2 generic_perform_write ext4_write_begin ext4_walk_page_buffers do_journal_get_write_access ->add BJ_Reserved list ext4_journalled_write_end ext4_walk_page_buffers write_end_fn ext4_handle_dirty_metadata ***************JBD2 ABORT************** jbd2_journal_dirty_metadata -> return -EROFS, jh in reserved_list jbd2_journal_commit_transaction while (commit_transaction->t_reserved_list) jh = commit_transaction->t_reserved_list; truncate_pagecache_range do_invalidatepage ext4_journalled_invalidatepage jbd2_journal_invalidatepage journal_unmap_buffer __dispose_buffer __jbd2_journal_unfile_buffer jbd2_journal_put_journal_head ->put last ref_count __journal_remove_journal_head bh->b_private = NULL; jh->b_bh = NULL; jbd2_journal_refile_buffer(journal, jh); bh = jh2bh(jh); ->bh is NULL, later will trigger null-ptr-deref journal_free_journal_head(jh); After commit 96f1e09, we no longer hold the j_state_lock while iterating over the list of reserved handles in jbd2_journal_commit_transaction(). This potentially allows the journal_head to be freed by journal_unmap_buffer while the commit codepath is also trying to free the BJ_Reserved buffers. Keeping j_state_lock held while trying extends hold time of the lock minimally, and solves this issue. Fixes: 96f1e09("jbd2: avoid long hold times of j_state_lock while committing a transaction") Signed-off-by: Ye Bin <yebin10@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20220317142137.1821590-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… lwt hook [ Upstream commit b02d196 ] xmit_check_hhlen() observes the dst for getting the device hard header length to make sure a modified packet can fit. When a helper which changes the dst - such as bpf_skb_set_tunnel_key() - is called as part of the xmit program the accessed dst is no longer valid. This leads to the following splat: BUG: kernel NULL pointer dereference, address: 00000000000000de #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 798 Comm: ping Not tainted 5.18.0-rc2+ torvalds#103 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 RIP: 0010:bpf_xmit+0xfb/0x17f Code: c6 c0 4d cd 8e 48 c7 c7 7d 33 f0 8e e8 42 09 fb ff 48 8b 45 58 48 8b 95 c8 00 00 00 48 2b 95 c0 00 00 00 48 83 e0 fe 48 8b 00 <0f> b7 80 de 00 00 00 39 c2 73 22 29 d0 b9 20 0a 00 00 31 d2 48 89 RSP: 0018:ffffb148c0bc7b98 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000240008 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 00000000ffffffea RDI: 00000000ffffffff RBP: ffff922a828a4e00 R08: ffffffff8f1350e8 R09: 00000000ffffdfff R10: ffffffff8f055100 R11: ffffffff8f105100 R12: 0000000000000000 R13: ffff922a828a4e00 R14: 0000000000000040 R15: 0000000000000000 FS: 00007f414e8f0080(0000) GS:ffff922afdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000de CR3: 0000000002d80006 CR4: 0000000000370ef0 Call Trace: <TASK> lwtunnel_xmit.cold+0x71/0xc8 ip_finish_output2+0x279/0x520 ? __ip_finish_output.part.0+0x21/0x130 Fix by fetching the device hard header length before running the BPF code. Fixes: 3a0af8f ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220420165219.1755407-1-eyal.birger@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit af68656 ] While handling PCI errors (AER flow) driver tries to disable NAPI [napi_disable()] after NAPI is deleted [__netif_napi_del()] which causes unexpected system hang/crash. System message log shows the following: ======================================= [ 3222.537510] EEH: Detected PCI bus error on PHB#384-PE#800000 [ 3222.537511] EEH: This PCI device has failed 2 times in the last hour and will be permanently disabled after 5 failures. [ 3222.537512] EEH: Notify device drivers to shutdown [ 3222.537513] EEH: Beginning: 'error_detected(IO frozen)' [ 3222.537514] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->error_detected(IO frozen) [ 3222.537516] bnx2x: [bnx2x_io_error_detected:14236(eth14)]IO error detected [ 3222.537650] EEH: PE#800000 (PCI 0384:80:00.0): bnx2x driver reports: 'need reset' [ 3222.537651] EEH: PE#800000 (PCI 0384:80:00.1): Invoking bnx2x->error_detected(IO frozen) [ 3222.537651] bnx2x: [bnx2x_io_error_detected:14236(eth13)]IO error detected [ 3222.537729] EEH: PE#800000 (PCI 0384:80:00.1): bnx2x driver reports: 'need reset' [ 3222.537729] EEH: Finished:'error_detected(IO frozen)' with aggregate recovery state:'need reset' [ 3222.537890] EEH: Collect temporary log [ 3222.583481] EEH: of node=0384:80:00.0 [ 3222.583519] EEH: PCI device/vendor: 168e14e4 [ 3222.583557] EEH: PCI cmd/status register: 00100140 [ 3222.583557] EEH: PCI-E capabilities and status follow: [ 3222.583744] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.583892] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.583893] EEH: PCI-E 20: 00000000 [ 3222.583893] EEH: PCI-E AER capability register set follows: [ 3222.584079] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.584230] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.584378] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.584416] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.584416] EEH: of node=0384:80:00.1 [ 3222.584454] EEH: PCI device/vendor: 168e14e4 [ 3222.584491] EEH: PCI cmd/status register: 00100140 [ 3222.584492] EEH: PCI-E capabilities and status follow: [ 3222.584677] EEH: PCI-E 00: 00020010 012c8da2 00095d5e 00455c82 [ 3222.584825] EEH: PCI-E 10: 10820000 00000000 00000000 00000000 [ 3222.584826] EEH: PCI-E 20: 00000000 [ 3222.584826] EEH: PCI-E AER capability register set follows: [ 3222.585011] EEH: PCI-E AER 00: 13c10001 00000000 00000000 00062030 [ 3222.585160] EEH: PCI-E AER 10: 00002000 000031c0 000001e0 00000000 [ 3222.585309] EEH: PCI-E AER 20: 00000000 00000000 00000000 00000000 [ 3222.585347] EEH: PCI-E AER 30: 00000000 00000000 [ 3222.586872] RTAS: event: 5, Type: Platform Error (224), Severity: 2 [ 3222.586873] EEH: Reset without hotplug activity [ 3224.762767] EEH: Beginning: 'slot_reset' [ 3224.762770] EEH: PE#800000 (PCI 0384:80:00.0): Invoking bnx2x->slot_reset() [ 3224.762771] bnx2x: [bnx2x_io_slot_reset:14271(eth14)]IO slot reset initializing... [ 3224.762887] bnx2x 0384:80:00.0: enabling device (0140 -> 0142) [ 3224.768157] bnx2x: [bnx2x_io_slot_reset:14287(eth14)]IO slot reset --> driver unload Uninterruptible tasks ===================== crash> ps | grep UN 213 2 11 c000000004c89e00 UN 0.0 0 0 [eehd] 215 2 0 c000000004c80000 UN 0.0 0 0 [kworker/0:2] 2196 1 28 c000000004504f00 UN 0.1 15936 11136 wickedd 4287 1 9 c00000020d076800 UN 0.0 4032 3008 agetty 4289 1 20 c00000020d056680 UN 0.0 7232 3840 agetty 32423 2 26 c00000020038c580 UN 0.0 0 0 [kworker/26:3] 32871 4241 27 c0000002609ddd00 UN 0.1 18624 11648 sshd 32920 10130 16 c00000027284a100 UN 0.1 48512 12608 sendmail 33092 32987 0 c000000205218b00 UN 0.1 48512 12608 sendmail 33154 4567 16 c000000260e51780 UN 0.1 48832 12864 pickup 33209 4241 36 c000000270cb6500 UN 0.1 18624 11712 sshd 33473 33283 0 c000000205211480 UN 0.1 48512 12672 sendmail 33531 4241 37 c00000023c902780 UN 0.1 18624 11648 sshd EEH handler hung while bnx2x sleeping and holding RTNL lock =========================================================== crash> bt 213 PID: 213 TASK: c000000004c89e00 CPU: 11 COMMAND: "eehd" #0 [c000000004d477e0] __schedule at c000000000c70808 #1 [c000000004d478b0] schedule at c000000000c70ee0 #2 [c000000004d478e0] schedule_timeout at c000000000c76dec #3 [c000000004d479c0] msleep at c0000000002120cc #4 [c000000004d479f0] napi_disable at c000000000a06448 ^^^^^^^^^^^^^^^^ #5 [c000000004d47a30] bnx2x_netif_stop at c0080000018dba94 [bnx2x] #6 [c000000004d47a60] bnx2x_io_slot_reset at c0080000018a551c [bnx2x] #7 [c000000004d47b20] eeh_report_reset at c00000000004c9bc #8 [c000000004d47b90] eeh_pe_report at c00000000004d1a8 STMicroelectronics#9 [c000000004d47c40] eeh_handle_normal_event at c00000000004da64 And the sleeping source code ============================ crash> dis -ls c000000000a06448 FILE: ../net/core/dev.c LINE: 6702 6697 { 6698 might_sleep(); 6699 set_bit(NAPI_STATE_DISABLE, &n->state); 6700 6701 while (test_and_set_bit(NAPI_STATE_SCHED, &n->state)) * 6702 msleep(1); 6703 while (test_and_set_bit(NAPI_STATE_NPSVC, &n->state)) 6704 msleep(1); 6705 6706 hrtimer_cancel(&n->timer); 6707 6708 clear_bit(NAPI_STATE_DISABLE, &n->state); 6709 } EEH calls into bnx2x twice based on the system log above, first through bnx2x_io_error_detected() and then bnx2x_io_slot_reset(), and executes the following call chains: bnx2x_io_error_detected() +-> bnx2x_eeh_nic_unload() +-> bnx2x_del_all_napi() +-> __netif_napi_del() bnx2x_io_slot_reset() +-> bnx2x_netif_stop() +-> bnx2x_napi_disable() +->napi_disable() Fix this by correcting the sequence of NAPI APIs usage, that is delete the NAPI after disabling it. Fixes: 7fa6f34 ("bnx2x: AER revised") Reported-by: David Christensen <drc@linux.vnet.ibm.com> Tested-by: David Christensen <drc@linux.vnet.ibm.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20220426153913.6966-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…to avoid GPF [ Upstream commit 1a726cb ] The call to get_user_pages_fast() in vmci_host_setup_notify() can return NULL context->notify_page causing a GPF. To avoid GPF check if context->notify_page == NULL and return error if so. general protection fault, probably for non-canonical address 0xe0009d1000000060: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: maybe wild-memory-access in range [0x0005088000000300- 0x0005088000000307] CPU: 2 PID: 26180 Comm: repro_34802241 Not tainted 6.1.0-rc4 #1 Hardware name: Red Hat KVM, BIOS 1.15.0-2.module+el8.6.0 04/01/2014 RIP: 0010:vmci_ctx_check_signal_notify+0x91/0xe0 Call Trace: <TASK> vmci_host_unlocked_ioctl+0x362/0x1f40 __x64_sys_ioctl+0x1a1/0x230 do_syscall_64+0x3a/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: a1d8843 ("VMCI: Fix two UVA mapping bugs") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: George Kennedy <george.kennedy@oracle.com> Reviewed-by: Vishnu Dasa <vdasa@vmware.com> Link: https://lore.kernel.org/r/1669666705-24012-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6a34172 ] syzkaller reported a warning below [0]. We can reproduce it by sending 0-byte data from the (AF_PACKET, SOCK_PACKET) socket via some devices whose dev->hard_header_len is 0. struct sockaddr_pkt addr = { .spkt_family = AF_PACKET, .spkt_device = "tun0", }; int fd; fd = socket(AF_PACKET, SOCK_PACKET, 0); sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr)); We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as commit dc63370 ("net/af_packet: check len when min_header_len equals to 0"). Let's add the same test for the SOCK_PACKET socket. [0]: skb_assert_len WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 skb_assert_len include/linux/skbuff.h:2552 [inline] WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 __dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159 Modules linked in: CPU: 1 PID: 19945 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_assert_len include/linux/skbuff.h:2552 [inline] RIP: 0010:__dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159 Code: 89 de e8 1d a2 85 fd 84 db 75 21 e8 64 a9 85 fd 48 c7 c6 80 2a 1f 86 48 c7 c7 c0 06 1f 86 c6 05 23 cf 27 04 01 e8 fa ee 56 fd <0f> 0b e8 43 a9 85 fd 0f b6 1d 0f cf 27 04 31 ff 89 de e8 e3 a1 85 RSP: 0018:ffff8880217af6e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90001133000 RDX: 0000000000040000 RSI: ffffffff81186922 RDI: 0000000000000001 RBP: ffff8880217af8b0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888030045640 R13: ffff8880300456b0 R14: ffff888030045650 R15: ffff888030045718 FS: 00007fc5864da640(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020005740 CR3: 000000003f856003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> dev_queue_xmit include/linux/netdevice.h:3085 [inline] packet_sendmsg_spkt+0xc4b/0x1230 net/packet/af_packet.c:2066 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b4/0x200 net/socket.c:747 ____sys_sendmsg+0x331/0x970 net/socket.c:2503 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2557 __sys_sendmmsg+0x18c/0x430 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc58791de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fc5864d9cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007fc58791de5d RDX: 0000000000000001 RSI: 0000000020005740 RDI: 0000000000000004 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc58797e530 R15: 0000000000000000 </TASK> ---[ end trace 0000000000000000 ]--- skb len=0 headroom=16 headlen=0 tailroom=304 mac=(16,0) net=(16,-1) trans=-1 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0 dev name=sit0 feat=0x00000006401d7869 sk family=17 type=10 proto=0 Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4063384 ] Before blamed commit, pskb_may_pull() was used instead of skb_header_pointer() in __vlan_get_protocol() and friends. Few callers depended on skb->head being populated with MAC header, syzbot caught one of them (skb_mac_gso_segment()) Add vlan_get_protocol_and_depth() to make the intent clearer and use it where sensible. This is a more generic fix than commit e9d3f80 ("net/af_packet: make sure to pull mac header") which was dealing with a similar issue. kernel BUG at include/linux/skbuff.h:2655 ! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1441 Comm: syz-executor199 Not tainted 6.1.24-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:__skb_pull include/linux/skbuff.h:2655 [inline] RIP: 0010:skb_mac_gso_segment+0x68f/0x6a0 net/core/gro.c:136 Code: fd 48 8b 5c 24 10 44 89 6b 70 48 c7 c7 c0 ae 0d 86 44 89 e6 e8 a1 91 d0 00 48 c7 c7 00 af 0d 86 48 89 de 31 d2 e8 d1 4a e9 ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RSP: 0018:ffffc90001bd7520 EFLAGS: 00010286 RAX: ffffffff8469736a RBX: ffff88810f31dac0 RCX: ffff888115a18b00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90001bd75e8 R08: ffffffff84697183 R09: fffff5200037adf9 R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000012 R13: 000000000000fee5 R14: 0000000000005865 R15: 000000000000fed7 FS: 000055555633f300(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 0000000116fea000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> [<ffffffff847018dd>] __skb_gso_segment+0x32d/0x4c0 net/core/dev.c:3419 [<ffffffff8470398a>] skb_gso_segment include/linux/netdevice.h:4819 [inline] [<ffffffff8470398a>] validate_xmit_skb+0x3aa/0xee0 net/core/dev.c:3725 [<ffffffff84707042>] __dev_queue_xmit+0x1332/0x3300 net/core/dev.c:4313 [<ffffffff851a9ec7>] dev_queue_xmit+0x17/0x20 include/linux/netdevice.h:3029 [<ffffffff851b4a82>] packet_snd net/packet/af_packet.c:3111 [inline] [<ffffffff851b4a82>] packet_sendmsg+0x49d2/0x6470 net/packet/af_packet.c:3142 [<ffffffff84669a12>] sock_sendmsg_nosec net/socket.c:716 [inline] [<ffffffff84669a12>] sock_sendmsg net/socket.c:736 [inline] [<ffffffff84669a12>] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [<ffffffff84669c75>] __do_sys_sendto net/socket.c:2151 [inline] [<ffffffff84669c75>] __se_sys_sendto net/socket.c:2147 [inline] [<ffffffff84669c75>] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [<ffffffff8551d40f>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff8551d40f>] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [<ffffffff85600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 469aced ("vlan: consolidate VLAN parsing code and limit max parsing depth") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 90cbed5 ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf3 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40@huawei.com> Suggested-by: Florian Westphal <fw@strlen.de> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d2c48b2 ] Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [<ffffda301e85b7bc>] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [<ffffda301e812fec>] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [<ffffda301e80b184>] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ Suggested-by: James Morse <james.morse@arm.com> Signed-off-by: Pierre Gondois <pierre.gondois@arm.com> Reviewed-by: James Morse <james.morse@arm.com> Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05bb016 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 STMicroelectronics#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 STMicroelectronics#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 STMicroelectronics#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac STMicroelectronics#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d STMicroelectronics#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c11bd04 ] The recursion check in __bpf_prog_enter* and __bpf_prog_exit* leave preempt_count_{sub,add} unprotected. When attaching trampoline to them we get panic as follows, [ 867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28) [ 867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI [ 867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4 [ 867.843100] Call Trace: [ 867.843101] <TASK> [ 867.843104] asm_exc_int3+0x3a/0x40 [ 867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0 [ 867.843135] __bpf_prog_enter_recur+0x17/0x90 [ 867.843148] bpf_trampoline_6442468108_0+0x2e/0x1000 [ 867.843154] ? preempt_count_sub+0x1/0xa0 [ 867.843157] preempt_count_sub+0x5/0xa0 [ 867.843159] ? migrate_enable+0xac/0xf0 [ 867.843164] __bpf_prog_exit_recur+0x2d/0x40 [ 867.843168] bpf_trampoline_6442468108_0+0x55/0x1000 ... [ 867.843788] preempt_count_sub+0x5/0xa0 [ 867.843793] ? migrate_enable+0xac/0xf0 [ 867.843829] __bpf_prog_exit_recur+0x2d/0x40 [ 867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35) [ 867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c) [ 867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec) [ 867.843842] bpf_trampoline_6442468108_0+0x55/0x1000 ... That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are called after prog->active is decreased. Fixing this by adding these two functions into btf ids deny list. Suggested-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Yafang <laoar.shao@gmail.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jiri Olsa <olsajiri@gmail.com> Acked-by: Hao Luo <haoluo@google.com> Link: https://lore.kernel.org/r/20230413025248.79764-1-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 55793ea ] We tested and found an alarm caused by nbd_ioctl arg without verification. The UBSAN warning calltrace like below: UBSAN: Undefined behaviour in fs/buffer.c:1709:35 signed integer overflow: -9223372036854775808 - 1 cannot be represented in type 'long long int' CPU: 3 PID: 2523 Comm: syz-executor.0 Not tainted 4.19.90 #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x3f0 arch/arm64/kernel/time.c:78 show_stack+0x28/0x38 arch/arm64/kernel/traps.c:158 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x170/0x1dc lib/dump_stack.c:118 ubsan_epilogue+0x18/0xb4 lib/ubsan.c:161 handle_overflow+0x188/0x1dc lib/ubsan.c:192 __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:206 __block_write_full_page+0x94c/0xa20 fs/buffer.c:1709 block_write_full_page+0x1f0/0x280 fs/buffer.c:2934 blkdev_writepage+0x34/0x40 fs/block_dev.c:607 __writepage+0x68/0xe8 mm/page-writeback.c:2305 write_cache_pages+0x44c/0xc70 mm/page-writeback.c:2240 generic_writepages+0xdc/0x148 mm/page-writeback.c:2329 blkdev_writepages+0x2c/0x38 fs/block_dev.c:2114 do_writepages+0xd4/0x250 mm/page-writeback.c:2344 The reason for triggering this warning is __block_write_full_page() -> i_size_read(inode) - 1 overflow. inode->i_size is assigned in __nbd_ioctl() -> nbd_set_size() -> bytesize. We think it is necessary to limit the size of arg to prevent errors. Moreover, __nbd_ioctl() -> nbd_add_socket(), arg will be cast to int. Assuming the value of arg is 0x80000000000000001) (on a 64-bit machine), it will become 1 after the coercion, which will return unexpected results. Fix it by adding checks to prevent passing in too large numbers. Signed-off-by: Zhong Jinghua <zhongjinghua@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Link: https://lore.kernel.org/r/20230206145805.2645671-1-zhongjinghua@huawei.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 04e8279 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit db2a3cc ] Syzbot found the following issue: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000016 Mem abort info: ESR = 0x0000000096000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x06: level 2 translation fault Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000010af56000 [0000000000000016] pgd=08000001090da003, p4d=08000001090da003, pud=08000001090ce003, pmd=0000000000000000 Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 3036 Comm: syz-executor206 Not tainted 6.0.0-rc6-syzkaller-17739-g16c9f284e746 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : is_rec_inuse fs/ntfs3/ntfs.h:313 [inline] pc : ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232 lr : ni_write_inode+0xa0/0x798 fs/ntfs3/frecord.c:3226 sp : ffff8000126c3800 x29: ffff8000126c3860 x28: 0000000000000000 x27: ffff0000c8b02000 x26: ffff0000c7502320 x25: ffff0000c7502288 x24: 0000000000000000 x23: ffff80000cbec91c x22: ffff0000c8b03000 x21: ffff0000c8b02000 x20: 0000000000000001 x19: ffff0000c75024d8 x18: 00000000000000c0 x17: ffff80000dd1b198 x16: ffff80000db59158 x15: ffff0000c4b6b500 x14: 00000000000000b8 x13: 0000000000000000 x12: ffff0000c4b6b500 x11: ff80800008be1b60 x10: 0000000000000000 x9 : ffff0000c4b6b500 x8 : 0000000000000000 x7 : ffff800008be1b50 x6 : 0000000000000000 x5 : 0000000000000000 x4 : 0000000000000001 x3 : 0000000000000000 x2 : 0000000000000008 x1 : 0000000000000001 x0 : 0000000000000000 Call trace: is_rec_inuse fs/ntfs3/ntfs.h:313 [inline] ni_write_inode+0xac/0x798 fs/ntfs3/frecord.c:3232 ntfs_evict_inode+0x54/0x84 fs/ntfs3/inode.c:1744 evict+0xec/0x334 fs/inode.c:665 iput_final fs/inode.c:1748 [inline] iput+0x2c4/0x324 fs/inode.c:1774 ntfs_new_inode+0x7c/0xe0 fs/ntfs3/fsntfs.c:1660 ntfs_create_inode+0x20c/0xe78 fs/ntfs3/inode.c:1278 ntfs_create+0x54/0x74 fs/ntfs3/namei.c:100 lookup_open fs/namei.c:3413 [inline] open_last_lookups fs/namei.c:3481 [inline] path_openat+0x804/0x11c4 fs/namei.c:3688 do_filp_open+0xdc/0x1b8 fs/namei.c:3718 do_sys_openat2+0xb8/0x22c fs/open.c:1311 do_sys_open fs/open.c:1327 [inline] __do_sys_openat fs/open.c:1343 [inline] __se_sys_openat fs/open.c:1338 [inline] __arm64_sys_openat+0xb0/0xe0 fs/open.c:1338 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall arch/arm64/kernel/syscall.c:52 [inline] el0_svc_common+0x138/0x220 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x48/0x164 arch/arm64/kernel/syscall.c:206 el0_svc+0x58/0x150 arch/arm64/kernel/entry-common.c:636 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:654 el0t_64_sync+0x18c/0x190 Code: 97dafee4 340001b4 f9401328 2a1f03e0 (79402d14) ---[ end trace 0000000000000000 ]--- Above issue may happens as follows: ntfs_new_inode mi_init mi->mrec = kmalloc(sbi->record_size, GFP_NOFS); -->failed to allocate memory if (!mi->mrec) return -ENOMEM; iput iput_final evict ntfs_evict_inode ni_write_inode is_rec_inuse(ni->mi.mrec)-> As 'ni->mi.mrec' is NULL trigger NULL-ptr-deref To solve above issue if new inode failed make inode bad before call 'iput()' in 'ntfs_new_inode()'. Reported-by: syzbot+f45957555ed4a808cc7a@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c83b493 ] As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed8 ("nsh: add GSO support") Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 56077b5 ] When doing link mtu negotiation, a malicious peer may send Activate msg with a very small mtu, e.g. 4 in Shuang's testing, without checking for the minimum mtu, l->mtu will be set to 4 in tipc_link_proto_rcv(), then n->links[bearer_id].mtu is set to 4294967228, which is a overflow of '4 - INT_H_SIZE - EMSG_OVERHEAD' in tipc_link_mss(). With tipc_link.mtu = 4, tipc_link_xmit() kept printing the warning: tipc: Too large msg, purging xmit list 1 5 0 40 4! tipc: Too large msg, purging xmit list 1 15 0 60 4! And with tipc_link_entry.mtu 4294967228, a huge skb was allocated in named_distribute(), and when purging it in tipc_link_xmit(), a crash was even caused: general protection fault, probably for non-canonical address 0x2100001011000dd: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Not tainted 6.3.0.neta STMicroelectronics#19 RIP: 0010:kfree_skb_list_reason+0x7e/0x1f0 Call Trace: <IRQ> skb_release_data+0xf9/0x1d0 kfree_skb_reason+0x40/0x100 tipc_link_xmit+0x57a/0x740 [tipc] tipc_node_xmit+0x16c/0x5c0 [tipc] tipc_named_node_up+0x27f/0x2c0 [tipc] tipc_node_write_unlock+0x149/0x170 [tipc] tipc_rcv+0x608/0x740 [tipc] tipc_udp_recv+0xdc/0x1f0 [tipc] udp_queue_rcv_one_skb+0x33e/0x620 udp_unicast_rcv_skb.isra.72+0x75/0x90 __udp4_lib_rcv+0x56d/0xc20 ip_protocol_deliver_rcu+0x100/0x2d0 This patch fixes it by checking the new mtu against tipc_bearer_min_mtu(), and not updating mtu if it is too small. Fixes: ed193ec ("tipc: simplify link mtu negotiation") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 61ae320 ] There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem(): general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] nft_add_set_elem+0x14b0/0x2990 nf_tables_newsetelem+0x528/0xb30 Furthermore, there is a possible use-after-free while iterating, 'node' can be free'd so we need to cache the next value to use. Fixes: c9e6978 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 7e01c7f upstream. Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than the calculated "min" value, but greater than zero, the logic sets tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in cdc_ncm_fill_tx_frame() where all the data is handled. For small values of dwNtbOutMaxSize the memory allocated during alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to how size is aligned at alloc time: size = SKB_DATA_ALIGN(size); size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info)); Thus we hit the same bug that we tried to squash with commit 2be6d4d ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero") Low values of dwNtbOutMaxSize do not cause an issue presently because at alloc_skb() time more memory (512b) is allocated than required for the SKB headers alone (320b), leaving some space (512b - 320b = 192b) for CDC data (172b). However, if more elements (for example 3 x u64 = [24b]) were added to one of the SKB header structs, say 'struct skb_shared_info', increasing its original size (320b [320b aligned]) to something larger (344b [384b aligned]), then suddenly the CDC data (172b) no longer fits in the spare SKB data area (512b - 384b = 128b). Consequently the SKB bounds checking semantics fails and panics: skbuff: skb_over_panic: text:ffffffff831f755b len:184 put:172 head:ffff88811f1c6c00 data:ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:113! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 Workqueue: mld mld_ifc_work RIP: 0010:skb_panic net/core/skbuff.c:113 [inline] RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118 [snip] Call Trace: <TASK> skb_put+0x151/0x210 net/core/skbuff.c:2047 skb_put_zero include/linux/skbuff.h:2422 [inline] cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline] cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308 cdc_ncm_tx_fixup+0xa3/0x100 Deal with too low values of dwNtbOutMaxSize, clamp it in the range [USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure enough data space is allocated to handle CDC data by making sure dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE. Fixes: 289507d ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning") Cc: stable@vger.kernel.org Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/ Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 597441b upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 </TASK> This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ad42a35 upstream. syzbot reported [0] a null-ptr-deref in sk_get_rmem0() while using IPPROTO_UDPLITE (0x88): 14:25:52 executing program 1: r0 = socket$inet6(0xa, 0x80002, 0x88) We had a similar report [1] for probably sk_memory_allocated_add() in __sk_mem_raise_allocated(), and commit c915fe1 ("udplite: fix NULL pointer dereference") fixed it by setting .memory_allocated for udplite_prot and udplitev6_prot. To fix the variant, we need to set either .sysctl_wmem_offset or .sysctl_rmem. Now UDP and UDPLITE share the same value for .memory_allocated, so we use the same .sysctl_wmem_offset for UDP and UDPLITE. [0]: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 6829 Comm: syz-executor.1 Not tainted 6.4.0-rc2-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 RIP: 0010:sk_get_rmem0 include/net/sock.h:2907 [inline] RIP: 0010:__sk_mem_raise_allocated+0x806/0x17a0 net/core/sock.c:3006 Code: c1 ea 03 80 3c 02 00 0f 85 23 0f 00 00 48 8b 44 24 08 48 8b 98 38 01 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 da 48 c1 ea 03 <0f> b6 14 02 48 89 d8 83 e0 07 83 c0 03 38 d0 0f 8d 6f 0a 00 00 8b RSP: 0018:ffffc90005d7f450 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffc90004d92000 RDX: 0000000000000000 RSI: ffffffff88066482 RDI: ffffffff8e2ccbb8 RBP: ffff8880173f7000 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000030000 R13: 0000000000000001 R14: 0000000000000340 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9800000(0063) knlGS:00000000f7f1cb40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 000000002e82f000 CR3: 0000000034ff0000 CR4: 00000000003506f0 Call Trace: <TASK> __sk_mem_schedule+0x6c/0xe0 net/core/sock.c:3077 udp_rmem_schedule net/ipv4/udp.c:1539 [inline] __udp_enqueue_schedule_skb+0x776/0xb30 net/ipv4/udp.c:1581 __udpv6_queue_rcv_skb net/ipv6/udp.c:666 [inline] udpv6_queue_rcv_one_skb+0xc39/0x16c0 net/ipv6/udp.c:775 udpv6_queue_rcv_skb+0x194/0xa10 net/ipv6/udp.c:793 __udp6_lib_mcast_deliver net/ipv6/udp.c:906 [inline] __udp6_lib_rcv+0x1bda/0x2bd0 net/ipv6/udp.c:1013 ip6_protocol_deliver_rcu+0x2e7/0x1250 net/ipv6/ip6_input.c:437 ip6_input_finish+0x150/0x2f0 net/ipv6/ip6_input.c:482 NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ip6_input+0xa0/0xd0 net/ipv6/ip6_input.c:491 ip6_mc_input+0x40b/0xf50 net/ipv6/ip6_input.c:585 dst_input include/net/dst.h:468 [inline] ip6_rcv_finish net/ipv6/ip6_input.c:79 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] NF_HOOK include/linux/netfilter.h:297 [inline] ipv6_rcv+0x250/0x380 net/ipv6/ip6_input.c:309 __netif_receive_skb_one_core+0x114/0x180 net/core/dev.c:5491 __netif_receive_skb+0x1f/0x1c0 net/core/dev.c:5605 netif_receive_skb_internal net/core/dev.c:5691 [inline] netif_receive_skb+0x133/0x7a0 net/core/dev.c:5750 tun_rx_batched+0x4b3/0x7a0 drivers/net/tun.c:1553 tun_get_user+0x2452/0x39c0 drivers/net/tun.c:1989 tun_chr_write_iter+0xdf/0x200 drivers/net/tun.c:2035 call_write_iter include/linux/fs.h:1868 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x945/0xd50 fs/read_write.c:584 ksys_write+0x12b/0x250 fs/read_write.c:637 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0x65/0xf0 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 entry_SYSENTER_compat_after_hwframe+0x70/0x82 RIP: 0023:0xf7f21579 Code: b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 00 00 00 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d b4 26 00 00 00 00 8d b4 26 00 00 00 00 RSP: 002b:00000000f7f1c590 EFLAGS: 00000282 ORIG_RAX: 0000000000000004 RAX: ffffffffffffffda RBX: 00000000000000c8 RCX: 0000000020000040 RDX: 0000000000000083 RSI: 00000000f734e000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000296 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Modules linked in: Link: https://lore.kernel.org/netdev/CANaxB-yCk8hhP68L4Q2nFOJht8sqgXGGQO2AftpHs0u1xyGG5A@mail.gmail.com/ [1] Fixes: 850cbad ("udp: use it's own memory accounting schema") Reported-by: syzbot+444ca0907e96f7c5e48b@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=444ca0907e96f7c5e48b Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230523163305.66466-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ting commit b71b552 upstream. Currently ffa_drv->remove() is called unconditionally from ffa_device_remove(). Since the driver registration doesn't check for it and allows it to be registered without .remove callback, we need to check for the presence of it before executing it from ffa_device_remove() to above a NULL pointer dereference like the one below: | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000086000004 | EC = 0x21: IABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | user pgtable: 4k pages, 48-bit VAs, pgdp=0000000881cc8000 | [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 | Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP | CPU: 3 PID: 130 Comm: rmmod Not tainted 6.3.0-rc7 #6 | Hardware name: FVP Base RevC (DT) | pstate: 63402809 (nZCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=-c) | pc : 0x0 | lr : ffa_device_remove+0x20/0x2c | Call trace: | 0x0 | device_release_driver_internal+0x16c/0x260 | driver_detach+0x90/0xd0 | bus_remove_driver+0xdc/0x11c | driver_unregister+0x30/0x54 | ffa_driver_unregister+0x14/0x20 | cleanup_module+0x18/0xeec | __arm64_sys_delete_module+0x234/0x378 | invoke_syscall+0x40/0x108 | el0_svc_common+0xb4/0xf0 | do_el0_svc+0x30/0xa4 | el0_svc+0x2c/0x7c | el0t_64_sync_handler+0x84/0xf0 | el0t_64_sync+0x190/0x194 Fixes: 244f5d5 ("firmware: arm_ffa: Add missing remove callback to ffa_bus_type") Link: https://lore.kernel.org/r/20230419-ffa_fixes_6-4-v2-1-d9108e43a176@arm.com Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 691c041 ] Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.619471] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.620021] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.620564] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.621125] tc_setup_cb_add+0xd4/0x200 [ 164.621531] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.622047] fl_change+0xc95/0x18a0 [cls_flower] [ 164.622500] tc_new_tfilter+0x3fc/0xd20 [ 164.622906] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.623324] netlink_rcv_skb+0x54/0x100 [ 164.623727] netlink_unicast+0x190/0x250 [ 164.624138] netlink_sendmsg+0x245/0x4a0 [ 164.624544] sock_sendmsg+0x38/0x60 [ 164.624919] ____sys_sendmsg+0x1d0/0x1e0 [ 164.625340] ___sys_sendmsg+0x80/0xc0 [ 164.625731] __sys_sendmsg+0x51/0x90 [ 164.626117] do_syscall_64+0x3d/0x90 [ 164.626502] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.626995] other info that might help us debug this: [ 164.627725] Possible unsafe locking scenario: [ 164.628268] CPU0 CPU1 [ 164.628683] ---- ---- [ 164.629098] lock(&comp->sem); [ 164.629421] lock(&esw->offloads.encap_tbl_lock); [ 164.630066] lock(&comp->sem); [ 164.630555] lock(&esw->offloads.encap_tbl_lock); [ 164.630993] *** DEADLOCK *** [ 164.631575] 3 locks held by handler1/3456: [ 164.631962] #0: ffff888124b75130 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 164.632703] #1: ffff888116e512b8 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 164.633552] #2: ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.634435] stack backtrace: [ 164.634883] CPU: 17 PID: 3456 Comm: handler1 Not tainted 6.3.0-rc3+ #1 [ 164.635431] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 164.636340] Call Trace: [ 164.636616] <TASK> [ 164.636863] dump_stack_lvl+0x47/0x70 [ 164.637217] check_noncircular+0xfe/0x110 [ 164.637601] __lock_acquire+0x159e/0x26e0 [ 164.637977] ? mlx5_cmd_set_fte+0x5b0/0x830 [mlx5_core] [ 164.638472] lock_acquire+0xc2/0x2a0 [ 164.638828] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.639339] ? lock_is_held_type+0x98/0x110 [ 164.639728] __mutex_lock+0x92/0xcd0 [ 164.640074] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.640576] ? __lock_acquire+0x382/0x26e0 [ 164.640958] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641468] ? mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.641965] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.642454] ? lock_release+0xbf/0x240 [ 164.642819] post_process_attr+0x153/0x2d0 [mlx5_core] [ 164.643318] mlx5e_tc_add_fdb_flow+0x164/0x360 [mlx5_core] [ 164.643835] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.644340] mlx5e_configure_flower+0xe33/0x1a20 [mlx5_core] [ 164.644862] ? lock_acquire+0xc2/0x2a0 [ 164.645219] tc_setup_cb_add+0xd4/0x200 [ 164.645588] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.646067] fl_change+0xc95/0x18a0 [cls_flower] [ 164.646488] tc_new_tfilter+0x3fc/0xd20 [ 164.646861] ? tc_del_tfilter+0x810/0x810 [ 164.647236] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.647621] ? rtnl_setlink+0x160/0x160 [ 164.647982] netlink_rcv_skb+0x54/0x100 [ 164.648348] netlink_unicast+0x190/0x250 [ 164.648722] netlink_sendmsg+0x245/0x4a0 [ 164.649090] sock_sendmsg+0x38/0x60 [ 164.649434] ____sys_sendmsg+0x1d0/0x1e0 [ 164.649804] ? copy_msghdr_from_user+0x6d/0xa0 [ 164.650213] ___sys_sendmsg+0x80/0xc0 [ 164.650563] ? lock_acquire+0xc2/0x2a0 [ 164.650926] ? lock_acquire+0xc2/0x2a0 [ 164.651286] ? __fget_files+0x5/0x190 [ 164.651644] ? find_held_lock+0x2b/0x80 [ 164.652006] ? __fget_files+0xb9/0x190 [ 164.652365] ? lock_release+0xbf/0x240 [ 164.652723] ? __fget_files+0xd3/0x190 [ 164.653079] __sys_sendmsg+0x51/0x90 [ 164.653435] do_syscall_64+0x3d/0x90 [ 164.653784] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.654229] RIP: 0033:0x7f378054f8bd [ 164.654577] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 6a c3 f4 ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 be c3 f4 ff 48 [ 164.656041] RSP: 002b:00007f377fa114b0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 164.656701] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f378054f8bd [ 164.657297] RDX: 0000000000000000 RSI: 00007f377fa11540 RDI: 0000000000000014 [ 164.657885] RBP: 00007f377fa12278 R08: 0000000000000000 R09: 000000000000015c [ 164.658472] R10: 00007f377fa123d0 R11: 0000000000000293 R12: 0000560962d99bd0 [ 164.665317] R13: 0000000000000000 R14: 0000560962d99bd0 R15: 00007f377fa11540 Fixes: f9d196b ("net/mlx5e: Use correct eswitch for stack devices with lag") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit d1d8875 upstream. [ cmllamas: clean forward port from commit 015ac18 ("binder: fix UAF of alloc->vma in race with munmap()") in 5.10 stable. It is needed in mainline after the revert of commit a43cfc8 ("android: binder: stop saving a pointer to the VMA") as pointed out by Liam. The commit log and tags have been tweaked to reflect this. ] In commit 720c241 ("ANDROID: binder: change down_write to down_read") binder assumed the mmap read lock is sufficient to protect alloc->vma inside binder_update_page_range(). This used to be accurate until commit dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap"), which now downgrades the mmap_lock after detaching the vma from the rbtree in munmap(). Then it proceeds to teardown and free the vma with only the read lock held. This means that accesses to alloc->vma in binder_update_page_range() now will race with vm_area_free() in munmap() and can cause a UAF as shown in the following KASAN trace: ================================================================== BUG: KASAN: use-after-free in vm_insert_page+0x7c/0x1f0 Read of size 8 at addr ffff16204ad00600 by task server/558 CPU: 3 PID: 558 Comm: server Not tainted 5.10.150-00001-gdc8dcf942daa #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2a0 show_stack+0x18/0x2c dump_stack+0xf8/0x164 print_address_description.constprop.0+0x9c/0x538 kasan_report+0x120/0x200 __asan_load8+0xa0/0xc4 vm_insert_page+0x7c/0x1f0 binder_update_page_range+0x278/0x50c binder_alloc_new_buf+0x3f0/0xba0 binder_transaction+0x64c/0x3040 binder_thread_write+0x924/0x2020 binder_ioctl+0x1610/0x2e5c __arm64_sys_ioctl+0xd4/0x120 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Allocated by task 559: kasan_save_stack+0x38/0x6c __kasan_kmalloc.constprop.0+0xe4/0xf0 kasan_slab_alloc+0x18/0x2c kmem_cache_alloc+0x1b0/0x2d0 vm_area_alloc+0x28/0x94 mmap_region+0x378/0x920 do_mmap+0x3f0/0x600 vm_mmap_pgoff+0x150/0x17c ksys_mmap_pgoff+0x284/0x2dc __arm64_sys_mmap+0x84/0xa4 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 Freed by task 560: kasan_save_stack+0x38/0x6c kasan_set_track+0x28/0x40 kasan_set_free_info+0x24/0x4c __kasan_slab_free+0x100/0x164 kasan_slab_free+0x14/0x20 kmem_cache_free+0xc4/0x34c vm_area_free+0x1c/0x2c remove_vma+0x7c/0x94 __do_munmap+0x358/0x710 __vm_munmap+0xbc/0x130 __arm64_sys_munmap+0x4c/0x64 el0_svc_common.constprop.0+0xac/0x270 do_el0_svc+0x38/0xa0 el0_svc+0x1c/0x2c el0_sync_handler+0xe8/0x114 el0_sync+0x180/0x1c0 [...] ================================================================== To prevent the race above, revert back to taking the mmap write lock inside binder_update_page_range(). One might expect an increase of mmap lock contention. However, binder already serializes these calls via top level alloc->mutex. Also, there was no performance impact shown when running the binder benchmark tests. Fixes: c0fd210 ("Revert "android: binder: stop saving a pointer to the VMA"") Fixes: dd2283f ("mm: mmap: zap pages with read mmap_sem in munmap") Reported-by: Jann Horn <jannh@google.com> Closes: https://lore.kernel.org/all/20230518144052.xkj6vmddccq4v66b@revolver Cc: <stable@vger.kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Yang Shi <yang.shi@linux.alibaba.com> Cc: Liam Howlett <liam.howlett@oracle.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Acked-by: Todd Kjos <tkjos@google.com> Link: https://lore.kernel.org/r/20230519195950.1775656-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4faeee0 ] Historically connect(AF_UNSPEC) has been abused by syzkaller and other fuzzers to trigger various bugs. A recent one triggers a divide-by-zero [1], and Paolo Abeni was able to diagnose the issue. tcp_recvmsg_locked() has tests about sk_state being not TCP_LISTEN and TCP REPAIR mode being not used. Then later if socket lock is released in sk_wait_data(), another thread can call connect(AF_UNSPEC), then make this socket a TCP listener. When recvmsg() is resumed, it can eventually call tcp_cleanup_rbuf() and attempt a divide by 0 in tcp_rcv_space_adjust() [1] This patch adds a new socket field, counting number of threads blocked in sk_wait_event() and inet_wait_for_connect(). If this counter is not zero, tcp_disconnect() returns an error. This patch adds code in blocking socket system calls, thus should not hurt performance of non blocking ones. Note that we probably could revert commit 499350a ("tcp: initialize rcv_mss to TCP_MIN_MSS instead of 0") to restore original tcpi_rcv_mss meaning (was 0 if no payload was ever received on a socket) [1] divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 13832 Comm: syz-executor.5 Not tainted 6.3.0-rc4-syzkaller-00224-g00c7b5f4ddc5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 RIP: 0010:tcp_rcv_space_adjust+0x36e/0x9d0 net/ipv4/tcp_input.c:740 Code: 00 00 00 00 fc ff df 4c 89 64 24 48 8b 44 24 04 44 89 f9 41 81 c7 80 03 00 00 c1 e1 04 44 29 f0 48 63 c9 48 01 e9 48 0f af c1 <49> f7 f6 48 8d 04 41 48 89 44 24 40 48 8b 44 24 30 48 c1 e8 03 48 RSP: 0018:ffffc900033af660 EFLAGS: 00010206 RAX: 4a66b76cbade2c48 RBX: ffff888076640cc0 RCX: 00000000c334e4ac RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000001 RBP: 00000000c324e86c R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880766417f8 R13: ffff888028fbb980 R14: 0000000000000000 R15: 0000000000010344 FS: 00007f5bffbfe700(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32f25000 CR3: 000000007ced0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_recvmsg_locked+0x100e/0x22e0 net/ipv4/tcp.c:2616 tcp_recvmsg+0x117/0x620 net/ipv4/tcp.c:2681 inet6_recvmsg+0x114/0x640 net/ipv6/af_inet6.c:670 sock_recvmsg_nosec net/socket.c:1017 [inline] sock_recvmsg+0xe2/0x160 net/socket.c:1038 ____sys_recvmsg+0x210/0x5a0 net/socket.c:2720 ___sys_recvmsg+0xf2/0x180 net/socket.c:2762 do_recvmmsg+0x25e/0x6e0 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0x20f/0x260 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5c0108c0f9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f5bffbfe168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00007f5c011ac050 RCX: 00007f5c0108c0f9 RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000003 RBP: 00007f5c010e7b39 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f5c012cfb1f R14: 00007f5bffbfe300 R15: 0000000000022000 </TASK> Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Paolo Abeni <pabeni@redhat.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Tested-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20230526163458.2880232-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 36eec02 ] When use the following command to test: 1)ip link add bond0 type bond 2)ip link set bond0 up 3)tc qdisc add dev bond0 root handle ffff: mq 4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq The kernel reports NULL pointer dereference issue. The stack information is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mq_attach+0x44/0xa0 lr : qdisc_graft+0x20c/0x5cc sp : ffff80000e2236a0 x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0 x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1 x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000 x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000 x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000 x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000 Call trace: mq_attach+0x44/0xa0 qdisc_graft+0x20c/0x5cc tc_modify_qdisc+0x1c4/0x664 rtnetlink_rcv_msg+0x354/0x440 netlink_rcv_skb+0x64/0x144 rtnetlink_rcv+0x28/0x34 netlink_unicast+0x1e8/0x2a4 netlink_sendmsg+0x308/0x4a0 sock_sendmsg+0x64/0xac ____sys_sendmsg+0x29c/0x358 ___sys_sendmsg+0x90/0xd0 __sys_sendmsg+0x7c/0xd0 __arm64_sys_sendmsg+0x2c/0x38 invoke_syscall+0x54/0x114 el0_svc_common.constprop.1+0x90/0x174 do_el0_svc+0x3c/0xb0 el0_svc+0x24/0xec el0t_64_sync_handler+0x90/0xb4 el0t_64_sync+0x174/0x178 This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped. Fixes: 6ec1c69 ("net_sched: add classful multiqueue dummy scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Tested-by: Peilin Ye <peilin.ye@bytedance.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit a99d21c upstream. We may get an empty response with zero length at the beginning of the driver start and get following UBSAN error. Since there is no content(SDRT_NONE) for the response, just return and skip the response handling to avoid this problem. Test pass : SDIO wifi throughput test with this patch [ 126.980684] UBSAN: array-index-out-of-bounds in drivers/mmc/host/vub300.c:1719:12 [ 126.980709] index -1 is out of range for type 'u32 [4]' [ 126.980729] CPU: 4 PID: 9 Comm: kworker/u16:0 Tainted: G E 6.3.0-rc4-mtk-local-202304272142 #1 [ 126.980754] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 126.980770] Workqueue: kvub300c vub300_cmndwork_thread [vub300] [ 126.980833] Call Trace: [ 126.980845] <TASK> [ 126.980860] dump_stack_lvl+0x48/0x70 [ 126.980895] dump_stack+0x10/0x20 [ 126.980916] ubsan_epilogue+0x9/0x40 [ 126.980944] __ubsan_handle_out_of_bounds+0x70/0x90 [ 126.980979] vub300_cmndwork_thread+0x58e7/0x5e10 [vub300] [ 126.981018] ? _raw_spin_unlock+0x18/0x40 [ 126.981042] ? finish_task_switch+0x175/0x6f0 [ 126.981070] ? __switch_to+0x42e/0xda0 [ 126.981089] ? __switch_to_asm+0x3a/0x80 [ 126.981129] ? __pfx_vub300_cmndwork_thread+0x10/0x10 [vub300] [ 126.981174] ? __kasan_check_read+0x11/0x20 [ 126.981204] process_one_work+0x7ee/0x13d0 [ 126.981246] worker_thread+0x53c/0x1240 [ 126.981291] kthread+0x2b8/0x370 [ 126.981312] ? __pfx_worker_thread+0x10/0x10 [ 126.981336] ? __pfx_kthread+0x10/0x10 [ 126.981359] ret_from_fork+0x29/0x50 [ 126.981400] </TASK> Fixes: 88095e7 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/048cd6972c50c33c2e8f81d5228fed928519918b.1683987673.git.deren.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit ead54ce upstream. SW generated completions for outstanding WRs posted on SQ after QP is in error target the wrong CQ. This causes the ib_drain_sq to hang with no completion. Fix this to generate completions on the right CQ. [ 863.969340] INFO: task kworker/u52:2:671 blocked for more than 122 seconds. [ 863.979224] Not tainted 5.14.0-130.el9.x86_64 #1 [ 863.986588] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 863.996997] task:kworker/u52:2 state:D stack: 0 pid: 671 ppid: 2 flags:0x00004000 [ 864.007272] Workqueue: xprtiod xprt_autoclose [sunrpc] [ 864.014056] Call Trace: [ 864.017575] __schedule+0x206/0x580 [ 864.022296] schedule+0x43/0xa0 [ 864.026736] schedule_timeout+0x115/0x150 [ 864.032185] __wait_for_common+0x93/0x1d0 [ 864.037717] ? usleep_range_state+0x90/0x90 [ 864.043368] __ib_drain_sq+0xf6/0x170 [ib_core] [ 864.049371] ? __rdma_block_iter_next+0x80/0x80 [ib_core] [ 864.056240] ib_drain_sq+0x66/0x70 [ib_core] [ 864.062003] rpcrdma_xprt_disconnect+0x82/0x3b0 [rpcrdma] [ 864.069365] ? xprt_prepare_transmit+0x5d/0xc0 [sunrpc] [ 864.076386] xprt_rdma_close+0xe/0x30 [rpcrdma] [ 864.082593] xprt_autoclose+0x52/0x100 [sunrpc] [ 864.088718] process_one_work+0x1e8/0x3c0 [ 864.094170] worker_thread+0x50/0x3b0 [ 864.099109] ? rescuer_thread+0x370/0x370 [ 864.104473] kthread+0x149/0x170 [ 864.109022] ? set_kthread_struct+0x40/0x40 [ 864.114713] ret_from_fork+0x22/0x30 Fixes: 81091d7 ("RDMA/irdma: Add SW mechanism to generate completions on error") Link: https://lore.kernel.org/r/20220824154358.117-1-shiraz.saleem@intel.com Reported-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c308e9e ] SMCRv1 has a similar issue to SMCRv2 (see link below) that may access invalid MRs of RMBs when construct LLC ADD LINK CONT messages. BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ torvalds#49 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc] RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286 RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30 RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0 R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000 R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_srv_rkey_exchange+0xa7/0x190 [smc] smc_llc_srv_add_link+0x3ae/0x5a0 [smc] smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK> When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages. However smc_llc_add_link_cont() may mistakenly access to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes it. Fixes: 87f88cd ("net/smc: rkey processing for a new link as SMC client") Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alibaba.com Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 24e2278 ] syzkaller found a repro that causes Hung Task [0] with ipset. The repro first creates an ipset and then tries to delete a large number of IPs from the ipset concurrently: IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187 IPSET_ATTR_CIDR : 2 The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET) held, and other threads wait for it to be released. Previously, the same issue existed in set->variant->uadt() that could run so long under ip_set_lock(set). Commit 5e29dc3 ("netfilter: ipset: Rework long task execution when adding/deleting entries") tried to fix it, but the issue still exists in the caller with another mutex. While adding/deleting many IPs, we should release the CPU periodically to prevent someone from abusing ipset to hang the system. Note we need to increment the ipset's refcnt to prevent the ipset from being destroyed while rescheduling. [0]: INFO: task syz-executor174:268 blocked for more than 143 seconds. Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d Call trace: __switch_to+0x308/0x714 arch/arm64/kernel/process.c:556 context_switch kernel/sched/core.c:5343 [inline] __schedule+0xd84/0x1648 kernel/sched/core.c:6669 schedule+0xf0/0x214 kernel/sched/core.c:6745 schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804 __mutex_lock_common kernel/locking/mutex.c:679 [inline] __mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747 __mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035 mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286 nfnl_lock net/netfilter/nfnetlink.c:98 [inline] nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295 netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546 nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365 netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x4b8/0x810 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Reported-by: syzkaller <syzkaller@googlegroups.com> Fixes: a7b4f98 ("netfilter: ipset: IP set core support") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a2f4c14 ] A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156. The Source Routing Header (SRH) has the following format: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n]. The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows: 1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address. When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI. OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE. Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes. Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0]. Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1. [0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b </TASK> Modules linked in: Fixes: 8610c7c ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit f46fab0 ] Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook: SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 }; bpf_d_path(path, p, 128); return 0; } But bprm->executable can be NULL, so bpf_d_path call will crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40 It's problem for all stable trees with bpf_d_path helper, which was added in 5.9. This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load. For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space. Fixes: 6e22ab9 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis <tasos.papagiannnis@gmail.com> Suggested-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Stanislav Fomichev <sdf@google.com> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 011a871 ] When using DMA mode we are facing with Oops: [ 396.458157] Unable to handle kernel access to user memory without uaccess routines at virtual address 000000000000000c [ 396.469374] Oops [#1] [ 396.471839] Modules linked in: [ 396.475144] CPU: 0 PID: 114 Comm: arecord Not tainted 6.0.0-00164-g9a8eccdaf2be-dirty torvalds#68 [ 396.483619] Hardware name: YMP ELCT FPGA (DT) [ 396.488156] epc : dmaengine_pcm_open+0x1d2/0x342 [ 396.493227] ra : dmaengine_pcm_open+0x1d2/0x342 [ 396.498140] epc : ffffffff807fe346 ra : ffffffff807fe346 sp : ffffffc804e138f0 [ 396.505602] gp : ffffffff817bf730 tp : ffffffd8042c8ac0 t0 : 6500000000000000 [ 396.513045] t1 : 0000000000000064 t2 : 656e69676e65616d s0 : ffffffc804e13990 [ 396.520477] s1 : ffffffd801b86a18 a0 : 0000000000000026 a1 : ffffffff816920f8 [ 396.527897] a2 : 0000000000000010 a3 : fffffffffffffffe a4 : 0000000000000000 [ 396.535319] a5 : 0000000000000000 a6 : ffffffd801b87040 a7 : 0000000000000038 [ 396.542740] s2 : ffffffd801b94a00 s3 : 0000000000000000 s4 : ffffffd80427f5e8 [ 396.550153] s5 : ffffffd80427f5e8 s6 : ffffffd801b44410 s7 : fffffffffffffff5 [ 396.557569] s8 : 0000000000000800 s9 : 0000000000000001 s10: ffffffff8066d254 [ 396.564978] s11: ffffffd8059cf768 t3 : ffffffff817d5577 t4 : ffffffff817d5577 [ 396.572391] t5 : ffffffff817d5578 t6 : ffffffc804e136e8 [ 396.577876] status: 0000000200000120 badaddr: 000000000000000c cause: 000000000000000d [ 396.586007] [<ffffffff806839f4>] snd_soc_component_open+0x1a/0x68 [ 396.592439] [<ffffffff807fdd62>] __soc_pcm_open+0xf0/0x502 [ 396.598217] [<ffffffff80685d86>] soc_pcm_open+0x2e/0x4e [ 396.603741] [<ffffffff8066cea4>] snd_pcm_open_substream+0x442/0x68e [ 396.610313] [<ffffffff8066d1ea>] snd_pcm_open+0xfa/0x212 [ 396.615868] [<ffffffff8066d39c>] snd_pcm_capture_open+0x3a/0x60 [ 396.622048] [<ffffffff8065b35a>] snd_open+0xa8/0x17a [ 396.627421] [<ffffffff801ae036>] chrdev_open+0xa0/0x218 [ 396.632893] [<ffffffff801a5a28>] do_dentry_open+0x17c/0x2a6 [ 396.638713] [<ffffffff801a6d9a>] vfs_open+0x1e/0x26 [ 396.643850] [<ffffffff801b8544>] path_openat+0x96e/0xc96 [ 396.649518] [<ffffffff801b9390>] do_filp_open+0x7c/0xf6 [ 396.655034] [<ffffffff801a6ff2>] do_sys_openat2+0x8a/0x11e [ 396.660765] [<ffffffff801a735a>] sys_openat+0x50/0x7c [ 396.666068] [<ffffffff80003aca>] ret_from_syscall+0x0/0x2 [ 396.674964] ---[ end trace 0000000000000000 ]--- It happens because of play_dma_data/capture_dma_data pointers are NULL. Current implementation assigns these pointers at snd_soc_dai_driver startup() callback and reset them back to NULL at shutdown(). But soc_pcm_open() sequence uses DMA pointers in dmaengine_pcm_open() before snd_soc_dai_driver startup(). Most generic DMA capable I2S drivers use snd_soc_dai_driver probe() callback to init DMA pointers only once at probe. So move DMA init to dw_i2s_dai_probe and drop shutdown() and startup() callbacks. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Link: https://lore.kernel.org/r/20230512110343.66664-1-fido_max@inbox.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 691b048 ] - When a iSER session is released, ib_isert module is taking a mutex lock and releasing all pending connections. As part of this, ib_isert is destroying rdma cm_id. To destroy cm_id, rdma_cm module is sending CM events to CMA handler of ib_isert. This handler is taking same mutex lock. Hence it leads to deadlock between ib_isert & rdma_cm modules. - For fix, created local list of pending connections and release the connection outside of mutex lock. Calltrace: --------- [ 1229.791410] INFO: task kworker/10:1:642 blocked for more than 120 seconds. [ 1229.791416] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791418] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791419] task:kworker/10:1 state:D stack: 0 pid: 642 ppid: 2 flags:0x80004000 [ 1229.791424] Workqueue: ib_cm cm_work_handler [ib_cm] [ 1229.791436] Call Trace: [ 1229.791438] __schedule+0x2d1/0x830 [ 1229.791445] ? select_idle_sibling+0x23/0x6f0 [ 1229.791449] schedule+0x35/0xa0 [ 1229.791451] schedule_preempt_disabled+0xa/0x10 [ 1229.791453] __mutex_lock.isra.7+0x310/0x420 [ 1229.791456] ? select_task_rq_fair+0x351/0x990 [ 1229.791459] isert_cma_handler+0x224/0x330 [ib_isert] [ 1229.791463] ? ttwu_queue_wakelist+0x159/0x170 [ 1229.791466] cma_cm_event_handler+0x25/0xd0 [rdma_cm] [ 1229.791474] cma_ib_handler+0xa7/0x2e0 [rdma_cm] [ 1229.791478] cm_process_work+0x22/0xf0 [ib_cm] [ 1229.791483] cm_work_handler+0xf4/0xf30 [ib_cm] [ 1229.791487] ? move_linked_works+0x6e/0xa0 [ 1229.791490] process_one_work+0x1a7/0x360 [ 1229.791491] ? create_worker+0x1a0/0x1a0 [ 1229.791493] worker_thread+0x30/0x390 [ 1229.791494] ? create_worker+0x1a0/0x1a0 [ 1229.791495] kthread+0x10a/0x120 [ 1229.791497] ? set_kthread_struct+0x40/0x40 [ 1229.791499] ret_from_fork+0x1f/0x40 [ 1229.791739] INFO: task targetcli:28666 blocked for more than 120 seconds. [ 1229.791740] Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1 [ 1229.791741] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1229.791742] task:targetcli state:D stack: 0 pid:28666 ppid: 5510 flags:0x00004080 [ 1229.791743] Call Trace: [ 1229.791744] __schedule+0x2d1/0x830 [ 1229.791746] schedule+0x35/0xa0 [ 1229.791748] schedule_preempt_disabled+0xa/0x10 [ 1229.791749] __mutex_lock.isra.7+0x310/0x420 [ 1229.791751] rdma_destroy_id+0x15/0x20 [rdma_cm] [ 1229.791755] isert_connect_release+0x115/0x130 [ib_isert] [ 1229.791757] isert_free_np+0x87/0x140 [ib_isert] [ 1229.791761] iscsit_del_np+0x74/0x120 [iscsi_target_mod] [ 1229.791776] lio_target_np_driver_store+0xe9/0x140 [iscsi_target_mod] [ 1229.791784] configfs_write_file+0xb2/0x110 [ 1229.791788] vfs_write+0xa5/0x1a0 [ 1229.791792] ksys_write+0x4f/0xb0 [ 1229.791794] do_syscall_64+0x5b/0x1a0 [ 1229.791798] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: bd37922 ("iser-target: Fix pending connections handling in target stack shutdown sequnce") Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com> Link: https://lore.kernel.org/r/20230606102531.162967-2-saravanan.vajravel@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 9eed321 ] It probbaly makes no sense to support arbitrary network devices for lapbether. syzbot reported: skbuff: skb_under_panic: text:ffff80008934c100 len:44 put:40 head:ffff0000d18dd200 data:ffff0000d18dd1ea tail:0x16 end:0x140 dev:bond1 kernel BUG at net/core/skbuff.c:200 ! Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 5643 Comm: dhcpcd Not tainted 6.4.0-rc5-syzkaller-g4641cff8e810 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : skb_panic net/core/skbuff.c:196 [inline] pc : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 lr : skb_panic net/core/skbuff.c:196 [inline] lr : skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 sp : ffff8000973b7260 x29: ffff8000973b7270 x28: ffff8000973b7360 x27: dfff800000000000 x26: ffff0000d85d8150 x25: 0000000000000016 x24: ffff0000d18dd1ea x23: ffff0000d18dd200 x22: 000000000000002c x21: 0000000000000140 x20: 0000000000000028 x19: ffff80008934c100 x18: ffff8000973b68a0 x17: 0000000000000000 x16: ffff80008a43bfbc x15: 0000000000000202 x14: 0000000000000000 x13: 0000000000000001 x12: 0000000000000001 x11: 0000000000000201 x10: 0000000000000000 x9 : f22f7eb937cced00 x8 : f22f7eb937cced00 x7 : 0000000000000001 x6 : 0000000000000001 x5 : ffff8000973b6b78 x4 : ffff80008df9ee80 x3 : ffff8000805974f4 x2 : 0000000000000001 x1 : 0000000100000201 x0 : 0000000000000086 Call trace: skb_panic net/core/skbuff.c:196 [inline] skb_under_panic+0x13c/0x140 net/core/skbuff.c:210 skb_push+0xf0/0x108 net/core/skbuff.c:2409 ip6gre_header+0xbc/0x738 net/ipv6/ip6_gre.c:1383 dev_hard_header include/linux/netdevice.h:3137 [inline] lapbeth_data_transmit+0x1c4/0x298 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x8c/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x178/0x204 net/lapb/lapb_out.c:149 lapb_send_control+0x220/0x320 net/lapb/lapb_subr.c:251 lapb_establish_data_link+0x94/0xec lapb_device_event+0x348/0x4e0 notifier_call_chain+0x1a4/0x510 kernel/notifier.c:93 raw_notifier_call_chain+0x3c/0x50 kernel/notifier.c:461 __dev_notify_flags+0x2bc/0x544 dev_change_flags+0xd0/0x15c net/core/dev.c:8643 devinet_ioctl+0x858/0x17e4 net/ipv4/devinet.c:1150 inet_ioctl+0x2ac/0x4d8 net/ipv4/af_inet.c:979 sock_do_ioctl+0x134/0x2dc net/socket.c:1201 sock_ioctl+0x4ec/0x858 net/socket.c:1318 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __arm64_sys_ioctl+0x14c/0x1c8 fs/ioctl.c:856 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x98/0x2c0 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x138/0x244 arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:191 el0_svc+0x4c/0x160 arch/arm64/kernel/entry-common.c:647 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:665 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591 Code: aa1803e6 aa1903e7 a90023f5 947730f5 (d4210000) Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix USB IRQ handler initialization. Setting always-on on boost regulator generates a fault. Unable to handle kernel NULL pointer dereference at virtual address 0000004c pgd = 54d71286 [0000004c] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 72 Comm: irq/70-pmic_irq Not tainted 5.15.67ppav4.0 torvalds#188 Hardware name: STM32 (Device Tree Support) PC is at blocking_notifier_call_chain+0x4/0x90 LR is at regulator_notifier_call_chain+0xc/0x14 ... (blocking_notifier_call_chain) from [<c062b368>] (regulator_notifier_call_chain+0xc/0x14) (regulator_notifier_call_chain) from [<c0644a9c>] (stpmic1_boost_irq_handler+0x4c/0x84) (stpmic1_boost_irq_handler) from [<c017fbc0>] (handle_nested_irq+0xc8/0x12c) (handle_nested_irq) from [<c07160b0>] (regmap_irq_thread+0x46c/0x6d4) (regmap_irq_thread) from [<c017c2dc>] (irq_thread_fn+0x1c/0x7c) (irq_thread_fn) from [<c017c0bc>] (irq_thread+0x150/0x224) (irq_thread) from [<c0147874>] (kthread+0x14c/0x164) (kthread) from [<c0100130>] (ret_from_fork+0x14/0x24) Signed-off-by: Pascal Paillet <p.paillet@st.com> Change-Id: I23d72d24d2de029c516f4568dc518917cb2b95ca Reviewed-on: https://gerrit.st.com/c/mpu/oe/st/linux-stm32/+/312297 Reviewed-by: Patrick DELAUNAY <patrick.delaunay@foss.st.com> ACI: CITOOLS <MDG-smet-aci-reviews@list.st.com> ACI: CIBUILD <MDG-smet-aci-builds@list.st.com> Domain-Review: Patrick DELAUNAY <patrick.delaunay@foss.st.com>

Modify rpsmg_sdb driver to add ioctl for reading physical address of …

52f684f

…sdb buffer for transfer to CM4

mcarlin-ds merged commit 53a4ee9 into develop-r2.1 May 19, 2021

mcarlin-ds deleted the rpmsg-report-physaddr branch May 19, 2021 21:45

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Modify rpsmg_sdb driver #1

Modify rpsmg_sdb driver #1

mcarlin-ds commented May 19, 2021

Modify rpsmg_sdb driver #1

Modify rpsmg_sdb driver #1

Conversation

mcarlin-ds commented May 19, 2021