Engine/Genset Instance Handling

[mghan]

I recently added a Yacht Devices YDEG J1939 to N2K gateway for my generator. I configured it as instance 2 (instance 0 & 1 cover my mains) - that is confirmed by my Actisense NGT-1 reader (running on a Win PC) connected to the N2K network. The Actisense reader sees the instance (2), RPM, coolant temperature and runtime.

I have two issues:

1. The genset appears in Signal K as an additional propulsion.starboard engine, only differentiated by the source field, Being another instance, I would expect something like propulsion.2.xxx
2. Only coolant temp and runtime appear in Signal K (from PGN 127489). RPM (PGN 127488) do not appear unless I configure the genset gateway as another instance 0 (which greatly confuses the MFD displays). Attached is a NGT-1 log.
   skserver-raw_2019-02-27T22.log

[sbender9]

I just published this release, if you run the command to update node server, you should get the update.

[mghan]

Works perfectly – thank you! From: Scott Bender <notifications@github.com> Sent: Sunday, March 03, 2019 10:36 AM To: SignalK/n2k-signalk <n2k-signalk@noreply.github.com> Cc: Mike Ghan <mikeghan@ourclan.us>; Author <author@noreply.github.com> Subject: Re: [SignalK/n2k-signalk] Engine/Genset Instance Handling (#143) I just published this release, if you run the command to update node server, you should get the update. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub<#143 (comment)>, or mute the thread<https://github.com/notifications/unsubscribe-auth/ADPEnEhsVb13iIjqejsOrJDNLb8wEP7Iks5vTBXygaJpZM4bW-dl>.