preparing some incoming updates

Build-Windows-Compile-Enviroment/1.0-Zz.md

@@ -0,0 +1,11 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+1.0 Install 7z
+--------------
+a) http://downloads.sourceforge.net/sevenzip/7z920.msi (32-bit)
+
+OR
+
+http://downloads.sourceforge.net/sevenzip/7z920-x64.msi (64-bit)

Build-Windows-Compile-Enviroment/1.0.1-Notepad++.md

@@ -0,0 +1,9 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.0.1 Install Notepad ++
+--------------
+a) http://download.tuxfamily.org/notepadplus/6.5.3/npp.6.5.3.Installer.exe
+

Build-Windows-Compile-Enviroment/1.0.2-Git.md

@@ -0,0 +1,13 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.0.2 Install Git
+--------------
+a) http://git-scm.com/downloads
+
+b) Select the following options during installation:
+* Run Git From Windows Command Prompt
+* Check out Windows-style, commit Unix-style
+

Build-Windows-Compile-Enviroment/1.1-msys.md

@@ -0,0 +1,13 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.1 Install msys:
+--------------
+a) http://sourceforge.net/projects/mingw/files/Installer/mingw-get-setup.exe/download
+
+b) When the installer loads, click "Install" and/or "Continue" until you're presented with a list on the left hand side of the screen that starts with "Basic Setup". Click Basic Setup and on the list to the right scroll all the way down and click the checkbox for ONLY the "msys-base" package.  Select "Mark for installation", then click "Installation" from the top menu and "Apply Changes".
+
+c) Then click "Install" or "Continue" or "Close" until you're back to the lists again and then exit the Installation Manager by clicking "Installation" and "Quit".
+

Build-Windows-Compile-Enviroment/1.2-Perl.md

@@ -0,0 +1,12 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.2 Install Perl:
+--------------
+a) http://downloads.activestate.com/ActivePerl/releases/5.18.1.1800/ActivePerl-5.18.1.1800-MSWin32-x64-297570.msi
+
+b) Run the installer ("Next", "Next", "Next", "Install", blah blah blah).  If it asks to make changes to your computer, say "Yes".
+You can exclude Perl Script, PPM, documentation and examples if you don't need them for other purposes.
+

Build-Windows-Compile-Enviroment/1.3-Python.md

@@ -0,0 +1,11 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.3 Install Python:
+--------------
+a) http://www.python.org/ftp/python/3.3.3/python-3.3.3.amd64.msi
+
+b) Same deal, install the software.  However, make sure the "Add Python to Path" option is selected.
+

Build-Windows-Compile-Enviroment/1.4-GCC.md

@@ -0,0 +1,18 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.4 Install GCC from MinGW-builds project:
+--------------
+a) Download and unpack i686-4.8.2-release-posix-dwarf-rt_v3-rev2.7z
+http://sourceforge.net/projects/mingw-w64/files/Toolchains%20targetting%20Win32/Personal%20Builds/mingw-builds/4.8.2/threads-posix/dwarf/i686-4.8.2-release-posix-dwarf-rt_v3-rev2.7z/download
+
+b) Open Explorer and go to the download location, right click on the file and select "7-Zip" -> "Extract to i686-4.8.2-release-posix-dwarf-rt_v3-rev2/"
+
+c) Double click on the i686-4.8.2-release-posix-dwarf-rt_v3-rev2 directory and copy the folder "mingw32" to Local Disk (C:) 
+
+d) Click on Local Disk (C:) 
+
+e) Copy the "mingw32" folder into the "MinGW" folder
+

Build-Windows-Compile-Enviroment/1.5-check.md

@@ -0,0 +1,27 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+1.5 Verify your paths are correct:
+--------------
+a) In Explorer, right click on "Computer" and select "Properties". 
+
+b) Select "Advanced System Settings"
+
+c) Click "Environment Variables"
+
+d) In the box labeled "System Variables", locate "Path" and double click it.
+
+e) In the box that comes up, scroll through the "Variable Value" and make sure you see the words "Perl" and "Python" and "MinGW"
+* IF YOU DON'T SEE "PERL":
+* * Go to the beginning of the text and ADD TO THE BEGINNING "C:\Perl64\site\bin;C:\Perl64\bin;"
+* IF YOU DON'T SEE "PYTHON":
+* * Go to the beginning of the text and ADD TO THE BEGINNING "C:\Python33;"
+* IF YOU DON'T SEE "MINGW":
+* * Go to the beginning of the text and ADD TO THE BEGINNING "C:\MinGW\mingw32\bin;"
+
+Click "Ok", "Ok", "Ok", etc to close the Control Panel.			
+
+Having fun yet?  We haven't even gotten started.
+

Build-Windows-Compile-Enviroment/2.0-depencies.md

@@ -0,0 +1,11 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+2. Download, unpack and build required dependencies.
+--------------
+a) Create a folder called "deps" on Local Disk (C:) [C:\deps]
+b) In Explorer, navigate to C:\MinGW\msys\1.0\ and find "msys.bat".  Double click it to run it.  A window will open that looks like a command prompt.
+c) In this section, download all of the files to the C:\deps folder.
+

Build-Windows-Compile-Enviroment/2.1-OpenSSL.md

@@ -0,0 +1,24 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+2.1 Download OpenSSL: http://www.openssl.org/source/openssl-1.0.1e.tar.gz
+
+a) From a MinGw shell (that window we opened), unpack the source archive with tar (this will avoid symlink issues) then configure and make (one command per line):
+			cd /c/deps/
+
+			tar xvfz openssl-1.0.1e.tar.gz
+
+			cd openssl-1.0.1e
+
+			Configure mingw
+
+			make
+
+Ta da!  You just compiled OpenSSL!
+
+IF THIS FAILS... IF YOU SEE THE WORD "ERROR" OR "WHATEVER OF THE SORT... GO BACK TO STEP 1.5 AND TRY AGAIN.
+
+If it works it doesn't pat you on the back.  It just stops without saying "ERROR".  Welcome to software development.
+

Build-Windows-Compile-Enviroment/2.2-BerkleyDB.md

@@ -0,0 +1,21 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+2.2 Berkeley DB: http://download.oracle.com/berkeley-db/db-4.8.30.NC.tar.gz
+
+I used Berkeley DB 4.8.30 because it worked.  No other reason. 
+
+a)From the MinGW shell, unpack the source archive, configure and make:
+
+	cd /c/deps/
+
+	tar xvfz db-4.8.30.NC.tar.gz
+
+	cd db-4.8.30.NC/build_unix
+
+	../dist/configure --disable-replication --enable-mingw --enable-cxx
+
+	make
+

Build-Windows-Compile-Enviroment/2.3-Boost.md

@@ -0,0 +1,19 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+2.3 Boost: http://sourceforge.net/projects/boost/files/boost/1.55.0/
+--------------
+Some of the coddling stops here.  If you've made it this far successfully, you don't need me to hold your hand.
+
+a) Unpack boost inside your C:\deps folder.
+b) Then open a command prompt (CMD.EXE), and:
+
+		cd C:\deps\boost_1_55_0\
+
+		bootstrap.bat mingw
+
+		b2 --build-type=complete --with-chrono --with-filesystem --with-program_options --with-system --with-thread toolset=gcc stage
+
+This will compile the required boost libraries and put them into the stage folder (C:\deps\boost_1_55_0\stage).
+

Build-Windows-Compile-Enviroment/2.4-Miniupnc.md

@@ -0,0 +1,23 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+2.4 Miniupnpc: http://miniupnp.free.fr/files/download.php?file=miniupnpc-1.8.tar.gz
+--------------
+a) From the MSYS window (remember that?), type:
+
+		tar xvfz miniupnpc-1.8.tar.gz
+
+b) Using Explorer, rename containing folder from "miniupnpc-1.8" to "miniupnpc"
+c) Change to the "miniupnpc" directory and find the file named "Makefile.mingw" and open in it Notepad ++
+d) Go to line 61 and change "-enable-stdcall-fixup" to "--enable-stdcall-fixup"
+e) Save the file
+f) then from a Windows command prompt:
+
+		cd C:\deps\miniupnpc
+
+		mingw32-make -f Makefile.mingw init upnpc-static
+
+IF THIS STEP FAILS, REPEAT STEP 1.5!
+

Build-Windows-Compile-Enviroment/QT.txt

@@ -0,0 +1,71 @@
+Original credit for this guide: https://github.com/bryceweiner 
+Full Guide as Video on Youtube https://youtu.be/lce8olyDFMI
+http://wwww.Twitter.com/Tillkoeln http://wwww.Github.com/Tillkoeln
+
+
+
+3.0 Download the Spacecash source code
+--------------
+a) From a MSYS type:
+
+		cd /c/
+
+		git clone https://github.com/Tillkoeln/Spacecash
+
+		cd /c/Spacecash/src/leveldb
+
+		TARGET_OS=NATIVE_WINDOWS make libleveldb.a libmemenv.a
+
+
+
+Now... for the graphical wallet... and we're going to go really fast because you're a f'in pro now.
+
+4. Compiling Qt 5.2.0 libraries and Spacecash-Qt 
+--------------
+4.1 Download and unpack Qt base and tools sources:
+
+a) http://download.qt-project.org/official_releases/qt/5.2/5.2.0/submodules/qtbase-opensource-src-5.2.0.7z
+* Make a directory called C:\Qt
+* Unpack the contents of the file into C:\Qt
+* Rename the directory from qtbase-opensource-src-5.2.0 to 5.2.0
+
+b) http://download.qt-project.org/official_releases/qt/5.2/5.2.0/submodules/qttools-opensource-src-5.2.0.7z
+* Unpack the contents of the file into C:\Qt
+
+c) Open a command prompt and type:
+
+	cd\Qt\5.2.0
+
+	configure.bat -release -opensource -confirm-license -static -make libs -no-sql-sqlite -no-opengl -qt-zlib -qt-pcre -no-icu -no-gif -qt-libpng -qt-libjpeg -no-angle -no-vcproj -no-openssl -no-dbus -no-audio-backend -no-wmf-backend -no-qml-debug
+
+	mingw32-make
+
+e) Remember when we had to check the Path variable before?  We need to do that again.  Reference the instructions above on how to access it.  Add the following path to the beginning:
+
+	C:\Qt\5.2.0\bin;
+
+f) close and reopen the command prompt window so the new path will take effect.
+
+g) Type:
+
+	cd C:\Qt\qttools-opensource-src-5.2.0
+
+	qmake qttools.pro
+
+	mingw32-make
+
+5. Compiling the Spacecash-Qt client
+--------------
+
+
+5.1 In the command prompt type:
+
+	cd\Spacecash
+
+	qmake Spacecash-qt.pro
+
+	mingw32-make -f Makefile.Release
+
+YOU DID IT!
+
+Don't forget to create your .conf files!

bitcoin-qt.pro

@@ -1,6 +1,6 @@
 TEMPLATE = app
 TARGET = TrollpaymentGateway-qt
-VERSION = 1.0.0
+VERSION = 1.1.0
 INCLUDEPATH += src src/json src/qt
 QT += core gui network
 DEFINES += QT_GUI BOOST_THREAD_USE_LIB BOOST_SPIRIT_THREADSAFE
@@ -281,7 +281,11 @@ HEADERS += src/qt/bitcoingui.h \
     src/sph_fugue.h \
     src/sph_hamsi.h \
     src/sph_types.h \
-    src/clientversion.h
+    src/clientversion.h\
+    src/qt/blockbrowser.h \
+    src/qt/serveur.h \
+    src/qt/chatwindow.h \
+    src/qt/statisticspage.h
 
 SOURCES += src/qt/bitcoin.cpp src/qt/bitcoingui.cpp \
     src/qt/transactiontablemodel.cpp \
@@ -360,7 +364,11 @@ SOURCES += src/qt/bitcoin.cpp src/qt/bitcoingui.cpp \
     src/zerocoin/Params.cpp \
     src/zerocoin/SerialNumberSignatureOfKnowledge.cpp \
     src/zerocoin/SpendMetaData.cpp \
-    src/zerocoin/ZeroTest.cpp
+    src/zerocoin/ZeroTest.cpp \
+    src/qt/blockbrowser.cpp \
+    src/qt/serveur.cpp \
+    src/qt/chatwindow.cpp \
+    src/qt/statisticspage.cpp
 
 RESOURCES += \
     src/qt/bitcoin.qrc
@@ -377,7 +385,10 @@ FORMS += \
     src/qt/forms/sendcoinsentry.ui \
     src/qt/forms/askpassphrasedialog.ui \
     src/qt/forms/rpcconsole.ui \
-    src/qt/forms/optionsdialog.ui
+    src/qt/forms/optionsdialog.ui \
+    src/qt/forms/blockbrowser.ui \
+    src/qt/forms/chatwindow.ui \
+    src/qt/forms/statisticspage.ui
 
 contains(USE_QRCODE, 1) {
 HEADERS += src/qt/qrcodedialog.h