This document describes rationales for WebAssembly's design decisions, acting as footnotes to the main design text, keeping the main specification easier to read, and making it easier to revisit decisions later without having to plow through all the issues and pull requests. This rationale document tries to list how decisions were made, and where tradeoffs were made for the sake of language ergonomics, portability, performance, security, and Getting Things Done.
WebAssembly was designed incrementally, with multiple implementations being pursued concurrently. As the MVP stabilizes and we get experience from real-world codebases, we'll revisit the alternatives listed below, reevaluate the tradeoffs and update the design before the MVP is finalized.
Why a stack machine?
Why not an AST, or a register- or SSA-based bytecode?
- We started with an AST and generalized to a structured stack machine. ASTs allow a dense encoding and efficient decoding, compilation, and interpretation. The structured stack machine of WebAssembly is a generalization of ASTs allowed in previous versions while allowing efficiency gains in interpretation and baseline compilation, as well as a straightforward design for multi-return functions.
- The stack machine allows smaller binary encoding than registers or SSA JSZap, Slim Binaries, and structured control flow allows simpler and more efficient verification, including decoding directly to a compiler's internal SSA form.
- Polyfill prototype shows simple and efficient translation to asm.js.
Why not a fully-general stack machine?
The WebAssembly stack machine is restricted to structured control flow and structured use of the stack. This greatly simplifies one-pass verification, avoiding a fixpoint computation like that of other stack machines such as the Java Virtual Machine (prior to stack maps). This also simplifies compilation and manipulation of WebAssembly code by other tools. Further generalization of the WebAssembly stack machine is planned post-MVP, such as the addition of multiple return values from control flow constructs and function calls.
Basic Types Only
WebAssembly only represents a few types.
- More complex types can be formed from these basic types. It's up to the source language compiler to express its own types in terms of the basic machine types. This allows WebAssembly to present itself as a virtual ISA, and lets compilers target it as they would any other ISA.
- These types are directly representable on all modern CPU architectures.
- Smaller types (such as
i16) are usually no more efficient and in languages like C/C++ are only semantically meaningful for memory accesses since arithmetic get widened to
i64. Avoiding them at least for MVP makes it easier to implement a WebAssembly VM.
- Other types (such as
i128) aren't widely supported by existing hardware and can be supported by runtime libraries if developers wish to use them. Hardware support is sometimes uneven, e.g. some support load/store of
f16only whereas other hardware also supports scalar arithmetic on
f16, and yet other hardware only supports SIMD arithmetic on
f16. They can be added to WebAssembly later without compromising MVP.
- More complex object types aren't semantically useful for MVP: WebAssembly seeks to provide the primitive building blocks upon which higher-level constructs can be built. They may become useful to support other languages, especially when considering garbage collection.
Load/store instructions include an immediate offset used for addressing. This is intended to simplify folding of offsets into complex address modes in hardware, and to simplify bounds checking optimizations. It offloads some of the optimization work to the compiler that targets WebAssembly, executing on the developer's machine, instead of performing that work in the WebAssembly compiler on the user's machine.
Load/store instructions contain alignment hints. This makes it easier to generate efficient code on certain hardware architectures.
Either tooling or an explicit opt-in "debug mode" in the spec could allow execution of a module in a mode that threw exceptions on misaligned access. This mode would incur some runtime cost for branching on most platforms which is why it isn't the specified default.
Out of Bounds
The ideal semantics is for out-of-bounds accesses to trap, but the implications are not yet fully clear.
There are several possible variations on this design being discussed and experimented with. More measurement is required to understand the associated tradeoffs.
- After an out-of-bounds access, the instance can no longer execute code and
- This would primarily allow hoisting bounds checks above effectful operators.
- This can be viewed as a mild security measure under the assumption that while the sandbox is still ensuring safety, the instance's internal state is incoherent and further execution could lead to Bad Things (e.g., XSS attacks).
- To allow for potentially more-efficient memory sandboxing, the semantics
could allow for a nondeterministic choice between one of the following when
an out-of-bounds access occurred.
- The ideal trap semantics.
- Loads return an unspecified value.
- Stores are either ignored or store to an unspecified location in the linear memory.
- Either tooling or an explicit opt-in "debug mode" in the spec should allow execution of a module in a mode that threw exceptions on out-of-bounds access.
Linear Memory Resizing
To allow efficient engines to employ virtual-memory based techniques for bounds checking, memory sizes are required to be page-aligned. For portability across a range of CPU architectures and operating systems, WebAssembly defines a fixed page size. Programs can depend on this fixed page size and still remain portable across all WebAssembly engines. 64KiB represents the least common multiple of many platforms and CPUs. In the future, WebAssembly may offer the ability to use larger page sizes on some platforms for increased TLB efficiency.
grow_memory operator returns the old memory size. This is desirable for
grow_memory independently on multiple threads, so that each thread can
know where the region it allocated starts. The obvious alternative would be for
such threads to communicate manually, however WebAssembly implementations will likely
already be communicating between threads in order to properly allocate the sum
of the allocation requests, so it's expected that they can provide the needed
information without significant extra effort.
The optional maximum size is designed to address a number of competing constraints:
- Allow WebAssembly modules to grab large regions of contiguous memory in a 32-bit address space early in an application's startup before the virtual address space becomes fragmented by execution of the application.
- Allow many small WebAssembly instances to execute in a single 32-bit process. (For example, it is common for a single web application to use dozens of libraries, each of which may, over time, include WebAssembly modules as implementation details.)
- Avoid forcing every developer using WebAssembly to understand their precise maximum heap usage.
- When threading and shared memory are added to WebAssembly
post-MVP, the design should not require memory growth
reallocsince this implies significant implementation complexity, security hazards, and optimization challenges.
The optional maximum addresses these constraints:
- (1) is addressed by specifying a large maximum memory size. Simply setting a large initial memory size has problems due to (3) and the fact that a failure to allocate initial is a fatal error which makes the choice of "how big?" difficult.
- (2) and (3) are addressed by making the maximum optional combined with the implied implementation that, on 32-bit, engines will not allocate significantly more than the current memory size, and the compiler sets the initial size to just enough to hold static data.
- (4) is addressed assuming that, when threading is added, a new, optional
"shared" flag is added to the memory section that must be set to enable shared
memory and the shared flag forces the maximum to be specified. In this case,
shared memory never moves; the only thing that changes is that the bounds
grows which does not have all the abovementioned hazards. In particular, any
SharedArrayBuffers that alias linear memory stay valid without any updates.
Linear memory disabled if no linear memory section
Structured control flow provides simple and size-efficient binary encoding and
compilation. Any control flow--even irreducible--can be transformed into structured
control flow with the
with guaranteed low code size overhead, and typically minimal throughput
overhead (except for pathological cases of irreducible control
flow). Alternative approaches can generate reducible control flow via node
splitting, which can reduce throughput overhead, at the cost of increasing
code size (potentially very significantly in pathological cases).
more expressive control flow constructs
The nop operator does not produce a value or cause side effects.
It is nevertheless useful for compilers and tools, which sometimes need to replace instructions with a
nop. Without a
nop instruction, code generators would use alternative does-nothing opcode patterns that consume space in a module and may have a runtime cost. Finding an appropriate opcode that does nothing but has the appropriate type for the node's location is nontrivial. The existence of many different ways to encode
nop - often mixed in the same module - would reduce the efficiency of compression algorithms.
C/C++ makes it possible to take the address of a function's local values and pass this pointer to callees or to other threads. Since WebAssembly's local variables are outside the address space, C/C++ compilers implement address-taken variables by creating a separate stack data structure within linear memory. This stack is sometimes called the "aliased" stack, since it is used for variables which may be pointed to by pointers.
Since the aliased stack appears to the WebAssembly engine as normal memory, WebAssembly optimizations that would target the aliased stack need to be more general, and thus more complicated. We observe that common compiler optimizations done before the WebAssembly code is produced, such as LLVM's global value numbering, effectively split address-taken variables into many small ranges that can often be allocated as local variables. Thus our expectation that any loss of optimization potential here is minimal.
Conversely, non-address taken values which are usually on the stack are instead represented as locals inside functions. This effectively means that WebAssembly has an infinite set of registers, and can choose to spill values as it sees fit in a manner unobservable to the hosted code. This implies that there's a separate stack, unaddressable from hosted code, which is also used to spill return values. This allows strong security properties to be enforced, but does mean that two stacks are maintained (one by the VM, the other by the compiler which targets WebAssembly) which can lead to some inefficiencies.
Local variables are not in Static Single Assignment (SSA) form, meaning that
multiple incoming SSA values which have separate liveness can "share" the
storage represented by a local through the
set_local operator. From an SSA
perspective, this means that multiple independent values can share a local
variable in WebAssembly, which is effectively a kind of pre-coloring that clever
producers can use to pre-color variables and give hints to a WebAssembly VM's
register allocation algorithms, offloading some of the optimization work from
the WebAssembly VM.
Variable-Length Argument Lists ("varargs")
C and C++ compilers are expected to implement variable-length argument lists by storing arguments in a buffer in linear memory and passing a pointer to the buffer. This greatly simplifies WebAssembly VM implementations by punting this ABI consideration to the front-end compiler. It does negatively impact performance, but variable-length calls are already somewhat slow.
Multiple Return Values
WebAssembly's MVP does not support multiple return values from functions because they aren't strictly necessary for the earliest anticipated use cases (and it's a minimum viable product), and they would introduce some complexity for some implementations. However, multiple return values are a very useful feature, and are relevant to ABIs, so it's likely to be added soon after the MVP.
The table-based scheme for indirect function calls was motivated by the need to represent function pointers as integer values that can be stored into the linear memory, as well as to enforce basic safety properties such as calling a function with the wrong signature does not destroy the safety guarantees of WebAssembly. In particular, an exact signature match implies an internal machine-level ABI match, which some engines require to ensure safety. An indirection also avoids a possible information leak through raw code addresses.
Languages like C and C++ that compile to WebAssembly also imposed requirements, such as the uniqueness of function pointers and the ability to compare function pointers to data pointers, or treat data as function pointers.
Several alternatives to direct indices with a heterogeneous indirect function table were considered, from alternatives with multiple tables to statically typed function pointers that can be mapped back and forth to integers. With the added complication of dynamic linking and dynamic code generation, none of these alternatives perfectly fit the requirements.
The current design requires two dynamic checks when invoking a function pointer: a bounds check against the size of the indirect function table and a signature check for the function at that index against an expected signature. Some dynamic optimization techniques (e.g. inline caches, or a one-element cache), can reduce the number of checks in common cases. Other techniques such as trading a bounds check for a mask or segregating the table per signature to require only a bounds check could be considered in the future. Also, if tables are small enough, an engine can internally use per-signature tables filled with failure handlers to avoid one check.
Control Flow Instructions with Values
Control flow instructions such as
transfer stack values in WebAssembly. These primitives are useful building blocks for
WebAssembly producers, e.g. in compiling expression languages. It offers significant
size reduction by avoiding the need for
get_local pairs in the common case
of an expression with only one immediate use. Control flow instructions can then model
expressions with result values, thus allowing even more opportunities to further reduce
get_local usage (which constitute 30-40% of total bytes in the
if constructs that return values can also model
appear in SSA representations of programs.
Limited Local Nondeterminism
There are a few obvious cases where nondeterminism is essential to the API, such as random number generators, date/time functions or input events. The WebAssembly specification is strict when it comes to other sources of limited local nondeterminism of operators: it specifies all possible corner cases, and specifies a single outcome when this can be done reasonably.
Ideally, WebAssembly would be fully deterministic because a fully deterministic platform is easier to:
- Reason about.
- Test portably.
Nondeterminism is only specified as a compromise when there is no other practical way to:
- Achieve portable native performance.
- Lower resource usage.
- Reduce implementation complexity (both of WebAssembly VMs as well as compilers generating WebAssembly binaries).
- Allow usage of new hardware features.
- Allows implementations to security-harden certain usecases.
When nondeterminism is allowed into WebAssembly it is always done in a limited and local manner. This prevents the entire program from being invalid, as would be the case with C++ undefined behavior.
As WebAssembly gets implemented and tested with multiple languages on multiple architectures we may revisit some of the design decisions:
- When all relevant hardware implements an operation the same way, there's no need for nondeterminism in WebAssembly semantics. One such example is floating-point: at a high-level most operators follow IEEE-754 semantics, it is therefore not necessary to specify WebAssembly's floating-point operators differently from IEEE-754.
- When different languages have different expectations then it's unfortunate if WebAssembly measurably penalizes one's performance by enforcing determinism which that language doesn't care about, but which another language may want.
NaN bit-pattern nondeterminism.
NaNs produced by floating-point instructions in WebAssembly have nondeterministic bit patterns in most circumstances. The bit pattern of a NaN is not usually significant, however there are a few ways that it can be observed:
reinterpretconversion to an integer type
storeto linear memory followed by a load with a different type or index
- a NaN stored to an imported or exported global variable or linear memory may be observed by the outside environment
- a NaN passed to a
call_indirectto an imported function may be observed by the outside environment
- a return value of an exported function may be observed by the outside environment
copysigncan be used to copy the sign bit onto a non-NaN value, where it then be observed
The motivation for nondeterminism in NaN bit patterns is that popular platforms have differing behavior. IEEE 754-2008 makes some recommendations, but has few hard requirements in this area, and in practice there is significant divergence, for example:
- When an instruction with no NaN inputs produces a NaN output, x86 produces a NaN with the sign bit set, while ARM and others produce a NaN with it unset.
- When an instruction has multiple NaN inputs, x86 always returns the first NaN (converted to a quiet NaN if needed), while ARMv8 returns the first signaling NaN (converted to a quiet NaN) if one is present, and otherwise returns the first quiet NaN.
- Some hardware architectures have found that returning one of the input NaNs has a cost, and prefer to return a NaN with a fixed bit pattern instead.
- LLVM (used in some WebAssembly implementations) doesn't guarantee that it
fmuland other instructions, so it's not possible to rely on the "first" NaN being preserved as such.
- IEEE 754-2008 itself recommends architectures use NaN bits to provide architecture-specific debugging facilities.
IEEE 754-2008 6.2 says that instructions returning a NaN should return one of their input NaNs. In WebAssembly, implementations may do this, however they are not required to. Since IEEE 754-2008 states this as a "should" (as opposed to a "shall"), it isn't a requirement for IEEE 754-2008 conformance.
An alternative design would be to require engines to always "canonicalize" NaNs whenever their bits could be observed. This would eliminate the nondeterminism and provide slightly better portability, since it would hide hardware-specific NaN propagation behavior. However, it is theorized that this would add an unacceptable amount of overhead, and that the benefit is marginal since most programs are unaffected by this issue.
Support for NaN-boxing.
In general, WebAssembly's floating point instructions provide the guarantee that if all NaNs passed to an instruction are "canonical", the result is "canonical", where canonical means the most significant bit of the fraction field is 1, and the trailing bits are all 0.
This is intended to support interpreters running on WebAssembly that use NaN-boxing, because they don't have to canonicalize the output of an arithmetic instruction if they know the inputs are canonical.
When one or more of the inputs of an instruction are non-canonical NaNs, the resulting NaN bit pattern is nondeterministic. This is intended to accommodate the diversity in NaN behavior among popular hardware architectures.
Note that the sign bit is still nondeterministic in a canonical NaN. This is also to accommodate popular hardware architectures; for example, x86 generates NaNs with the sign bit set to 1 while other architectures generate NaNs with it set to 0. And as above, the cost of canonicalizing NaNs is believed to be greater than the benefit.
NaNs generated by JS or other entities in the external environment are not required to be canonical, so exported function arguments, imported function return values, and values stored in exported variables or memory may be non-canonical.
WebAssembly's signed integer divide rounds its result toward zero. This is not because of a lack of sympathy for better alternatives, but out of practicality. Because all popular hardware today implements rounding toward zero, and because C and many other languages now specify rounding to zero, having WebAssembly in the middle doing something different would mean divisions would have to be doubly complicated.
WebAssembly has three classes of integer operations: signed, unsigned, and sign-agnostic. The signed and unsigned instructions have the property that whenever they can't return their mathematically expected value (such as when an overflow occurs, or when their operand is outside their domain), they trap, in order to avoid silently returning an incorrect value.
Note that the
mul operators are categorized as
sign-agnostic. Because of the magic of two's complement representation, they
may be used for both signed and unsigned purposes. Note that this (very
conveniently!) means that engines don't need to add extra overflow-checking
code for these most common of arithmetic operators on the most popular
Motivating Scenarios for Feature Testing
🦄is introduced. A WebAssembly developer updates their toolkit so that the compiler may leverage
i32.min_s. The developer's WebAssembly module works correctly both on execution environments at MVP, as well as those supporting
- A variant of this, where a few more new opcodes are available, the compiler is updated to be able to leverage all of them, but not all execution targets support all of them. The developer wants to reach as many of their customers as possible, while at the same time providing them with the best experience possible. The developer has to balance the cost of the test matrix resulting from the combinations of possible feature configurations.
🦄, module authors may now use Threading APIs in the browser. A developer wants to leverage multithreading in their module.
In one variant of the scenario, our developer does not want to pay the engineering cost of developing and supporting a threaded and non-threaded version of their code. They opt not to support MVP targets, and only support post-MVP targets. End-users (browser users) get some message indicating they need MVP support.
In another variant, our developer explicitly authors both MVP-only and post- MVP (with threads) code.
SIMD support is not universally equivalent on all targets. While polyfill variants of SIMD APIs are available, a developer prefers writing dedicated SIMD and non-SIMD versions of their compression algorithm, because the non-SIMD version performs better in environments without SIMD support, when compared to the SIMD polyfill. They package their compression code for reuse by third parties.
An application author is assembling together an application by reusing modules such as those developed in the scenarios above. The application author's development environment is able to quickly and correctly identify the platform dependencies (e.g. threading, SIMD) and communicate back to the application author the implications these dependencies have on the end-application. Some APIs exposed from the threading-aware module are only pertinent to environments supporting threading. As a consequence, the application author needs to write specialized code when threads are/are not supported. (Note: we should understand this scenario for both forms of WebAssembly reuse currently imagined: dynamic linking and static imports.)
The compression algorithm described in scenario 3 is deployed on a restrictive execution environment, as part of an application. In this environment, a process may not change memory page access protection flags (e.g. certain gaming consoles, to investigate server side deployment scenarios). The compression module is compiled by the WebAssembly environment, enabling the configuration most specific to the target (i.e. with/without Threads, SIMD, etc).
- A variant of this scenario where the environment is additionally separating storage into system-visible and application-visible, the latter not being able to contain machine-executable code (certain phones, to investigate if gaming consoles or server side have a similar sandboxing mechanism).
Why a binary encoding?
Given that text is so compressible and it is well known that it is hard to beat gzipped source, is there any win from having a binary format over a text format? Yes:
- Large reductions in payload size can still significantly decrease the
compressed file size.
- Experimental results from a polyfill prototype show the gzipped binary format to be about 20-30% smaller than the corresponding gzipped asm.js.
- A binary format that represents the names of variables and functions with raw indices instead of strings is much faster to decode: array indexing vs. dictionary lookup.
- A binary format allows many optimizations for code size and decoding speed that would not be possible on a source form.
Why a layered binary encoding?
- We can do better than generic compression because we are aware of the code
structure and other details:
- For example, macro compression that
deduplicates AST trees
can focus on ASTs + their children, thus having
O(nodes)entities to worry about, compared to generic compression which in principle would need to look at
O(bytes*bytes)entities. Such macros would allow the logical equivalent of
#define ADD1(x) (x+1), i.e., to be parameterized. Simpler macros (
#define ADDX1 (x+1)) can implement useful features like constant pools.
- Another example is reordering of functions and some internal nodes, which we know does not change semantics, but can improve general compression.
- For example, macro compression that deduplicates AST trees can focus on ASTs + their children, thus having
- JITs and simple developer tooling do not benefit from compression, so layering allows the related development and maintenance burden to be offloaded to reusable tools/libraries.
- Each of the layers works to find compression opportunities to the best of its abilities, without encroaching upon the subsequent layer's compression opportunities.
- Existing web standards demonstrate many of the advantages of a layered encoding strategy.
Why "polymorphic" stack typing after control transfer?
For a stack machine, the fundamental property that type checking must ensure is that for every edge in a control flow graph (formed by the individual instructions), the assumptions about the stack match up. At the same time, type checking should be fast, so be expressible by a linear traversal.
There is no control edge from an unconditional control transfer instruction (like
unreachable) to the textually following instruction -- the next instruction is unreachable.
Consequently, no constraint has to be imposed between the two regarding the stack.
In a linear type checking algorithm this can be expressed by allowing to assume any type of stack.
In type system terms, the instruction can thus be said to be polymorphic in its stack type.
This solution is canonical in the sense that it induces the minimal type constraints necessary to ensure soundness, while also maintaining the following useful structural properties about valid (i.e., well-typed) code:
- It is composable: if instruction sequences A and B are valid, then block(A,B) is valid (e.g. at empty stack type).
- It is decomposable: if block(A,B) is valid, then both A and B are valid.
- It generalises an expression language: every expression is directly expressible, even if it contains control transfer.
- It is agnostic to reachability: neither the specification nor producers need to define, check, or otherwise care about reachability (unless they choose to, e.g. to perform dead code elimination).
- It maintains basic transformations: for example, (i32.const 1) (br_if $l) can always be replaced with (br $l).
Some of these properties are relevant to support certain compilation techniques without artificial complication for producers. As a small but representative example, consider a textbook one-pass compiler, which would often use something like the following scheme for compiling expressions:
compile(A + B) = compile(A); compile(B); emit(i32.add) compile(A / B) = compile(A); compile(B); emit(dup i32.eqz (br_if $div_zero) drop i32.div) compile(A / 0) = compile(A); emit(br $div_zero)
The third case is a specialisation of the second, a simple optimisation.
Without polymorphic typing of the
br instruction, however, this simple scheme would not work, since
compile((x/0)+y) would result in invalid code. Worse, it can lead to subtle compiler bugs.
Similar situations arise in production compilers, for example, in the asm.js-to-wasm compilers that some of the WebAssembly VMs/tools are implementing.
Other solutions that have been discussed would lose most of the above properties. For example:
- Disallowing certain forms of unreachable code (whether by rules or by construction) would break all but decomposability.
- Allowing but not type-checking unreachable code would break decomposability and requires the spec to provide a syntactic definition of reachability (which is unlikely to match the definition otherwise used by producers).
- Requiring the stack to be empty after a jump remains agnostic to reachability and maintains decomposability, but still breaks all other properties.
It is worth noting that this kind of type checking, in general, is not unusual.
For example, the JVM also poses no constraint on the stack type after a jump (however, in its modern form, it recommends type annotations in the form of stack maps, which are then required after jumps to make the instantiation of the polymorphic typing rule explicit).
Moreover, programming languages that allow control transfer expressions usually type them polymorphically as well (e.g.,
raise, which is an expression in some languages).