README.md

Setup the fully kubernetes cluster inside the locally hosted

Table of Contents

• Use Vargrant to configuration the VM with provider
  • Requirements tools
  • Step by step
  • Vargrant note
• Ansible - To setup and run script and bring up kubernetes cluster on locally, Use kind
  • Define host for ansible provisioning
  • Run ansible for provisioning k8s with kind
  • Conclusion after provisioning K8s with kind and connfiguration
• Exploring, understanding and provisioning require components inside the kind cluster
  • Make the cluster become to ready state
  • Learn about kind cluster
  • Detailing the important components inside the kind cluster
• cilium and ebpf - The powerful kernal service of kubewekend cluster
  • Do familiar with ebpf and cilium
  • Enable hubble in cluster to see what network work inside the kubewekend cluster
• Build and Operate High Availability (HA) Kubewekend Cluster
  • Dive deeper into Kubelet
  • Dynamic add nodes to kind cluster
    • Not mount kernel to worker node
    • Can't not install cilium CNI inside worker node
  • Use vmbox to join worker node into master node
    • Attach your machine with Nat Network
    • Do some step with configuration cgroup
    • Connect your worker to master via kubeadm

Use Vargrant to configuration the VM with provider

Read full article about session at Kubewekend Session 1: Build up your host with Vagrant

Requirements tools

• Install virtualbox
• Install vagrant

Step by step

1. Location on the root of project
2. Set environment from file .env or manually configure

# Manually
export SSH_USER="vargrant-user"
export SSH_PRIV_KEY_PATH="~/.ssh/vmbox"

# Use .env file
cp -r .env.examples .env
set -o allexport && source .env && set +o allexport

3. Up your vagrant via virtualbox by

# Use can use another provider: https://developer.hashicorp.com/vagrant/docs/providers
# Provision 1 master and 1 worker
vagrant up k8s-master-machine k8s-worker-machine-1 --provider=virtualbox

# You can provision more worker with regex pattern
vagrant up "/k8s-worker-machine-[2-3]/" --provider=virtualbox

Result provisioning

Vargrant note

When you want to destroy, use destroy command with option to destroy vm

# Shutdown and destroy VM for all machines
vagrant destroy --graceful --force

# Specify the target with name
# (Use can regex to manipulate multiple machines)
vagrant destroy k8s-worker-machine-1 --graceful --force

When you want to execute a shell script, you can use provision command

# Execute a shell script for all machines
vagrant provision

# Execute a shell script for specific machines
# (Use can regex to manipulate multiple machines)
vagrant provision k8s-worker-machine-1

When you want to turn off the machine provisioning, use halt command

# Turn off all machines provision
vagrant halt

# Turn off the specific machine provision 
# (Use can regex to manipulate multiple machines)
vagrant halt k8s-worker-machine-1

When you want to reload the machine provisioning when update Vargrantfile, use reload command

# Reload all machines provision
vagrant reload

# Reload the specific machine provision
# (Use can regex to manipulate multiple machines)
vagrant reload k8s-worker-machine-1

When you want to add a new box to the machine, or cut off time for downloads machine. Use can use box command

# Check actually box we have in host
vagrant box list

# Install box to host
vagrant box add https://location/of/vagrant/box # (Can be local, Vagrant Registry or private storage)

# Example: vagrant box add https://app.vagrantup.com/ubuntu/boxes/focal64

When you want to connect to the machine, you have two ways to connect

• Via vargrant, ssh command

# Connect to machine with specified machine name
vagrant ssh k8s-worker-machine-1

# When you want to pass command via ssh
vagrant ssh k8s-worker-machine-1 --command "echo "Hello World" > foo.txt"

• Via actions with manually configured ssh-key

# With this action you need to location where .vagrant in your project, usually in root directory
ls .vagrant/

# After that you need run `ssh-agent` to create new session for agent ssh
eval $(ssh-agent -s) # Set the new session agent

# Add the key to your host, and make a authentication
ssh-add ./vagrant/machines/k8s-master-machine/private_key

# And lastone make a connection to machine on custom port
# Befor that you can check again with `vagrant ssh-config` to understand your `ssh` work on port
vagrant ssh-config

# Make a ssh connection
ssh vagrant@127.0.0.1 -p 6996

Show SSH Configuration

Make SSH connection

Ansible - To setup and run script and bring up kubernetes cluster on locally, Use kind

Read full article about session at Kubewekend Session 2: Setup Kind cluster with Ansible

Define host for ansible provisioning

On this step, you can use script which i create for purpose read and update hosts file for ansible

# If the file not executable, you can update permission for that
chmod +x ./script/operate-kind-cluster.kind

# Execute the bash script
./script/operate-kind-cluster.sh

After that your hosts file will update, like

k8s-master-machine ansible_ssh_host=127.0.0.1 ansible_ssh_port=6996 ansible_ssh_user=vagrant
k8s-worker-machine-1 ansible_ssh_host=127.0.0.1 ansible_ssh_port=9669 ansible_ssh_user=vagrant

When you doing done with setup hosts, you can use ansible to check your connection to host

ansible -i ./ansible/inventories/hosts all --user=vagrant -m ping

Check ping with Ansible

Run ansible for provisioning k8s with kind

Before you doing this step, you need make sure

• Need to configure Ansible to run the project (Ansible runs only on Linux, so need WSL for window machine or Linux virtual machine)
• Ansible is a bunch of tools built from python3. Install python is obligated for setup ansible environment (Recommended: python_version >= 3.9). Installing ansible ansible-lint via command:

# Python < 3.12
pip3 install ansible ansible-lint

# With Python = 3.12 (That tough to install :>)
# NOTICE: You need follow the strategy of python
# Recommendation: install apt
sudo apt install python3-ansible-runner -y
# Use pipx instead pip3 to install non-debian package
sudo apt install pipx -y
pipx ensurepath
pipx install ansible-lint

After you install all things above, just feel free to update or change configuration inside ./ansible/inventories/host_vars to update configuration on master or worker, and one more things ansible will use template to configuration kind, and you can follow that config and know what variable will map to template at ./ansible/templates/kind-config.yaml.j2

When you confirm all, perform command ansible-playbook to help you build kind cluster inside machine. Ansible will include two tags

• install_common: Install dependencies and install kind tool, to help you setup kind cluster
• setup_kind: Set variables base on your host_name, and execution kind command to build cluster base on template

# Setup control-plane (master) machine
ansible-playbook -i ansible/inventories/hosts --extra-vars="host_name=k8s-master-machine" --tags "install_common,setup_kind" ansible/k8s-provisioning-playbook.yaml
# Setup worker machine
ansible-playbook -i ansible/inventories/hosts --extra-vars="host_name=k8s-worker-machine-1" --tags "install_common,setup_kind" ansible/k8s-provisioning-playbook.yaml

Control Plane when completely provisioning

Worker when completely provisioning

Conclusion after provisioning K8s with kind and connfiguration

On this session, you will have meet the problem about kind need control-plane to operate cluster, It means you need at least one cluster to doing control stuff, not only worker node on host. So that cause some misconfiguration, to prevent fail in ansible, so I custom the template except role variables, now it will do same provisioning for master and worker, just exist only control-plane role

Actually when you install kubectl to your host, you will figure out

[!Bug] Right now, you kind cluster be in provisioned, but your state of cluster will not be ready, it means because some target is not be ready, include local-path-provisioner core-dns. And reason why start from we do not install cni and it make kubelet cann't be started inside the cluster,

That is reason why temporarily I will not share about how can make cluster become HA. And replacing, now we are moving to next part to learn about etcd, cni and kubelet, that can make your cluster become professional and stable

Exploring, understanding and provisioning require components inside the kind cluster

Read full article about session at Kubewekend Session 3: Basically about Kubernetes architecture

Make the cluster become to ready state

IYKYK, on the previous session 2, we have problem about state of cluster is not ready, you can deal with that problem by easily install one of cni to the cluster. In this topic, I will learn cilium and go to advantage with this tool that reason why i choose cilium to default cni of the cluster

You can find more information about setup cilium at: Cilium Quick Installation

To operate cilium, you need to install cli version and get communication with your cluster via that daemon

# Download cilium
wget https://github.com/cilium/cilium-cli/releases/download/v0.16.11/cilium-linux-amd64.tar.gz

# Extract
tar -xzf cilium-linux-amd64.tar.gz

# Install cilium
sudo mv cilium /usr/local/bin/

And now you have cilium-cli on your host

You install cilium to your cluster

# Install cilium to your cluster
cilium install --version 1.15.6

# Validate of cilium after installation
cilium status --wait

And re-check again your state of node, all pods and node are ready for in-use, before to doing that check make sure you install kubectl.

# Install kubectl from official page
curl -LO "https://dl.k8s.io/release/$(curl -L -s https://dl.k8s.io/release/stable.txt)/bin/linux/amd64/kubectl"

# Change permission for your kubectl tool
chmod +x kubectl

# Install kubectl to your host
sudo mv kubectl /usr/local/bin

You can check and validate your state of cluster and pod via get command

kubectl get pods -A

kubectl get nodes

Already for all stuff, now we can inspect what we have after running successfully cluster with kind

Learn about kind cluster

When you work with Kubernetes this will contain some major features, and you need to understand. Read more at: Kubernetes Components for English Version and If you want to learn in Vietnamese, shout out to A. Quan Huynh - Kubernetes Series - Kubernetes internals architecture

Belong to control-plane

• kube-apiserver: The API server is a component of the Kubernetes control plane that exposes the Kubernetes API.
• etcd: Consistent and highly-available key value store used as Kubernetes' backing store for all cluster data.
• kube-controller: Control plane component that runs controller processes.
• kube-scheduler: Control plane component that watches for newly created Pods with no assigned node, and selects a node for them to run on.

Belong to node

• kube-proxy: kube-proxy is a network proxy that runs on each node in your cluster, implementing part of the Kubernetes Service concept.
• kubelet: An agent that runs on each node in the cluster. It makes sure that containers are running in a Pod.
• Container runtime: Easily from previous twice session, kind use docker to part of container engine to operate cluster.

Besides

With kind, mostly of them is providing

• I have customize additional about networking part with cilium (Network Plugins) - software components that implement the container network interface (CNI) specification. That is factor and build up your workflow in local node on next session in my series
• Container Resource Monitoring: Container Resource Monitoring records generic time-series metrics about containers in a central database, and provides a UI for browsing that data (Now, I am not setup this, but on the monitoring session)
• Cluster-level Logging: A cluster-level logging mechanism is responsible for saving container logs to a central log store with search/browsing interface.
• DNS: Cluster DNS is a DNS server, in addition to the other DNS server(s) in your environment, which serves DNS records for Kubernetes services.

Detailing the important components inside the kind cluster

1. So first read about kubelet configuration inside host, you need to exec inside kind-control-plane container

# Exec to docker control-plane
docker exec -it k8s-master-machine-control-plane /bin/bash

# View kubelet configuration
kubectl get --raw "/api/v1/nodes/k8s-master-machine-control-plane/proxy/configz" | jq

and you can view about kubelet configuration

2. Secondly, we will move to etcd of kind cluster, that is important factor in kubernetes help you mostly powerful thing

You can find more information about etcd in the documentation: https://etcd.io/docs/v3.5/, and figure out what etcd bring up to kubernetes at: https://www.armosec.io/glossary/etcd-kubernetes/

• To view about detail etcd, use can use get command

kubectl get pods etcd-k8s-master-machine-control-plane -o json

And currently on 1.28.9 kubernetes, etcd is already running on version registry.k8s.io/etcd:3.5.12-0

• You can access to etcd shell, and can perform some practice with that use exec command

# Exec to stdin
kubectl exec --tty --stdin pods/etcd-k8s-master-machine-control-plane -- /bin/sh

# Use etcd to check version
etcd --version

# Practice etcd via etcdctl
etcdctl version

3. We will move on kube-scheduler which give decisions about what node is can deploy your pod, inspect that via describe command

# Inspect about kube-scheduler
kubectl describe pods/kube-scheduler-k8s-master-machine-control-plane

As you can see, It will run container in image registry.k8s.io/kube-scheduler:v1.28.9, and provide some configuration like

kube-scheduler
--authentication-kubeconfig=/etc/kubernetes/scheduler.conf
--authorization-kubeconfig=/etc/kubernetes/scheduler.conf
--bind-address=127.0.0.1
--kubeconfig=/etc/kubernetes/scheduler.conf
--leader-elect=true

You can explore more about at: Scheduler Configuration

Follow the Linkedin - Demystifying the Kubernetes Scheduler: Assigning Pods to Nodes Behind the Scenes, and I can understand argorithm mostly use like

The default scheduler algorithm filters and prioritizes nodes to find optimal match.

• Filtering rules out nodes that don't meet pod requirements like enough resources or match affinity rules.

• Prioritizing ranks remaining nodes to pick the best fit based on factors like resource utilization,spreading, etc.

4. Yup the kube-controller, kind have it and you can inspect more inside kind cluster use describe command, you can explore about this component at: https://komodor.com/learn/controller-manager/

kubectl describe pods/kube-controller-manager-k8s-master-machine-control-plane

I know it just controller base on kubernetes version registry.k8s.io/kube-controller-manager:v1.28.9 with parameters

 kube-controller-manager
   --allocate-node-cidrs=true
   --authentication-kubeconfig=/etc/kubernetes/controller-manager.conf
   --authorization-kubeconfig=/etc/kubernetes/controller-manager.conf
   --bind-address=127.0.0.1
   --client-ca-file=/etc/kubernetes/pki/ca.crt
   --cluster-cidr=10.244.0.0/16
   --cluster-name=k8s-master-machine
   --cluster-signing-cert-file=/etc/kubernetes/pki/ca.crt
   --cluster-signing-key-file=/etc/kubernetes/pki/ca.key
   --controllers=*,bootstrapsigner,tokencleaner
   --enable-hostpath-provisioner=true
   --kubeconfig=/etc/kubernetes/controller-manager.conf
   --leader-elect=true
   --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.crt
   --root-ca-file=/etc/kubernetes/pki/ca.crt
   --service-account-private-key-file=/etc/kubernetes/pki/sa.key
   --service-cluster-ip-range=10.96.0.0/16
   --use-service-account-credentials=true

5. How about apiserver, that is important plane for make conversation for all cluster, handle all request and execute when you meet the requirements

More explore about apiserver will disscuss details in this session in my blog, but you can feel free to inspect configuration and service use kubectl

# Inspect information about apiserver
kubectl describe pods/kube-apiserver-k8s-master-machine-control-plane

Like above, It use same version of kubernetes, registry.k8s.io/kube-apiserver:v1.28.9, with configuration

 kube-apiserver
   --advertise-address=172.18.0.2
   --allow-privileged=true
   --authorization-mode=Node,RBAC
   --client-ca-file=/etc/kubernetes/pki/ca.crt
   --enable-admission-plugins=NodeRestriction
   --enable-bootstrap-token-auth=true
   --etcd-cafile=/etc/kubernetes/pki/etcd/ca.crt
   --etcd-certfile=/etc/kubernetes/pki/apiserver-etcd-client.crt
   --etcd-keyfile=/etc/kubernetes/pki/apiserver-etcd-client.key
   --etcd-servers=https://127.0.0.1:2379
   --kubelet-client-certificate=/etc/kubernetes/pki/apiserver-kubelet-client.crt
   --kubelet-client-key=/etc/kubernetes/pki/apiserver-kubelet-client.key
   --kubelet-preferred-address-types=InternalIP,ExternalIP,Hostname
   --proxy-client-cert-file=/etc/kubernetes/pki/front-proxy-client.crt
   --proxy-client-key-file=/etc/kubernetes/pki/front-proxy-client.key
   --requestheader-allowed-names=front-proxy-client
   --requestheader-client-ca-file=/etc/kubernetes/pki/front-proxy-ca.crt
   --requestheader-extra-headers-prefix=X-Remote-Extra-
   --requestheader-group-headers=X-Remote-Group
   --requestheader-username-headers=X-Remote-User
   --runtime-config=
   --secure-port=6443
   --service-account-issuer=https://kubernetes.default.svc.cluster.local
   --service-account-key-file=/etc/kubernetes/pki/sa.pub
   --service-account-signing-key-file=/etc/kubernetes/pki/sa.key
   --service-cluster-ip-range=10.96.0.0/16
   --tls-cert-file=/etc/kubernetes/pki/apiserver.crt
   --tls-private-key-file=/etc/kubernetes/pki/apiserver.key

6. Go to kube-proxy, network configuration implementation for kubernetes concept, To inspect that service use describe command

kubectl describe pods/kube-proxy-xxxxx

NOTE: xxxxx will need you to fill, use get pods to retrieve that

After you use describe command, you can image the container it use registry.k8s.io/kube-proxy:v1.28.9 and use configmap to add configuration to kube-proxy

kubectl get configmap kube-proxy

7. Reach to lastly coredns, that is dns service which offer from kubernetes, mostly use for dns and service discovery purpose

kubectl describe deployments coredns 

As you can see, coredns will use configuration from configmap to operate and start with image registry.k8s.io/coredns/coredns:v1.10.1, that will help your service understand, give dns inside cluster to give route for service can commnuncate with each others

The config is quite new for me, but that kind of clearly to understanding what that want to defination

  Corefile: |
    .:53 {  Corefile: |
    .:53 {
        errors
        health {
           lameduck 5s
        }
        ready
        kubernetes cluster.local in-addr.arpa ip6.arpa {
           pods insecure
           fallthrough in-addr.arpa ip6.arpa
           ttl 30
        }
        prometheus :9153
        forward . /etc/resolv.conf {
           max_concurrent 1000
        }
        cache 30
        loop
        reload
        loadbalance
    }

        errors
        health {
           lameduck 5s
        }
        ready
        kubernetes cluster.local in-addr.arpa ip6.arpa {
           pods insecure
           fallthrough in-addr.arpa ip6.arpa
           ttl 30
        }
        prometheus :9153
        forward . /etc/resolv.conf {
           max_concurrent 1000
        }
        cache 30
        loop
        reload
        loadbalance
    }

And now we go through all the services of the cluster, reach to especially things I have setup, to understand what is that cilium service and what we can use it for

cilium and ebpf - The powerful kernal service of kubewekend cluster

Read full article about session at Kubewekend Session 4: Learn about ebpf with hubble and cilium

Do familiar with ebpf and cilium

So on the previous session, we do installation cilium to the kubewekend cluster, if use status command, you can known about status of cilium kubewekend cluster, including

• cilium-operator
• cilium in deamonset

If you have those one in kubernetes, you can practice around the command cilium to understand what cilium can do for

• You can use --help flag with cilium-cli to see more information

vagrant@k8s-master-machine:~$ cilium --help
CLI to install, manage, & troubleshooting Cilium clusters running Kubernetes.

Cilium is a CNI for Kubernetes to provide secure network connectivity and
load-balancing with excellent visibility using eBPF

Examples:
# Install Cilium in current Kubernetes context
cilium install

# Check status of Cilium
cilium status

# Enable the Hubble observability layer
cilium hubble enable

# Perform a connectivity test
cilium connectivity test

Usage:
  cilium [flags]
  cilium [command]

Available Commands:
  bgp          Access to BGP control plane
  clustermesh  Multi Cluster Management
  completion   Generate the autocompletion script for the specified shell
  config       Manage Configuration
  connectivity Connectivity troubleshooting
  context      Display the configuration context
  encryption   Cilium encryption
  help         Help about any command
  hubble       Hubble observability
  install      Install Cilium in a Kubernetes cluster using Helm
  status       Display status
  sysdump      Collects information required to troubleshoot issues with Cilium and Hubble
  uninstall    Uninstall Cilium using Helm
  upgrade      Upgrade a Cilium installation a Kubernetes cluster using Helm
  version      Display detailed version information

Flags:
      --context string             Kubernetes configuration context
      --helm-release-name string   Helm release name (default "cilium")
  -h, --help                       help for cilium
  -n, --namespace string           Namespace Cilium is running in (default "kube-system")

Use "cilium [command] --help" for more information about a command.

• To setup completion with cilium in your shell, use completion and command into your shell profile, such as zsh or bash

# Use if your profile is bash
echo "source <(cilium completion bash) >> .bashrc"

# Use if your profile is zsh
echo "source <(cilium completion zsh) >> .zshrc"

• You can check about cilium connectivity access in kubewekend cluster with providing scenarios from cilium via connectivity test

# If you validate connectivity

## Read manual of connectivity test command
cilium connectivity test --help

## Run tests inside cluster
cilium connectivity test

# If you want ti check network performance

## Read manual of connectivity perf command
cilium connectivity perf --help

## Run tests for check network performance
cilium connectivity perf

You will have 82 tests scenarios in kubewekend cluster, afterward you will get the result, if not any failure, your cilium work great with cluster

Fun things if you want to check about echo-same-node deployment, you can play with port-forward command inside kubectl and use reverse ssh to check the web-service before we setup cilium to expose service via domain

# Expose your service via localhost
kubectl port-forward -n cilium-test service/echo-same-node 8080:8080

# Because we do not hand-on any network inside `vmbox`, so we will use another way expose this service to your via `ssh-tunneling`
# Documentation: https://www.ssh.com/academy/ssh/tunneling-example

ssh -N -L 8080:127.0.0.1:8080 -i .vagrant/machines/k8s-master-machine/virtualbox/private_key vagrant@127.0.0.1 -p 6996

Access your host at http://localhost:8080

Quite fun a little bit, move on to inside cilium and inspect what is going on inside, view all the commands to use inside agent at https://docs.cilium.io/en/latest/cheatsheet/

# Find out the cilium pod
kubectl get pods -n kube-system

# Exec to the cilium pod to inspect more extensions
kubectl exec --tty --stdin -n kube-system cilium-xxxxx -- /bin/bash

• First of all, you run status command to deep inspect about the agent

# Check basic status
cilium status

# Check more about information on all controllers, health and redirects
cilium status --all-controllers --all-health --all-redirects

• Get current agent configuration

# Check configuration in basic
cilium config

# View all configuration of agent
cilium config --all

• Run a monitoring to capture all traffic like tcpdump inside cluster, with monitor command

# All Traffic monitoring
cilium monitor

# Monitoring with verbose version
cilium monitor -v

# Monitoring with only L7
cilium monitor -t l7

• Move on to check about service to view all loadbalancer services inside cluster

# View all services routing
cilium service list

# View specific services routing
cilium service get <id> -o json

More over you can see about bpf level of load balancer

cilium bpf lb list

• See the endpoint inside cluster is useful optional in cilium

# Get list of all local endpoints
cilium endpoint list

# Get detailed view of endpoint properties and state
cilium endpoint get <id>

# Show recent endpoint specific log entries
cilium endpoint log <id>

# Turn on or off debug in monitor of target endpoint
cilium endpoint config <id> Debug=true

cilium is more powerful, but if i list all, we will make this session become boring. So if you want to explore more features, check out at: https://docs.cilium.io/en/latest/cmdref/

Enable hubble in cluster to see what network work inside the kubewekend cluster

Back to the cilium in shell of vagrant host, you need to turn of hubble with command

cilium hubble enable

And now use status to check if hubble run or not

With hubble enable, kubewekend cluster will add a new thing run as deployment hubble-relay. But your version is deploy will not have any accesable, you need install add-on like hubble-client and hubble-ui to more visualize about hubble. Read more about hubble at: What is hubble?

First of all, install hubble-client to use command in your host

HUBBLE_VERSION=$(curl -s https://raw.githubusercontent.com/cilium/hubble/master/stable.txt)
HUBBLE_ARCH=amd64
if [ "$(uname -m)" = "aarch64" ]; then HUBBLE_ARCH=arm64; fi
curl -L --fail --remote-name-all https://github.com/cilium/hubble/releases/download/$HUBBLE_VERSION/hubble-linux-${HUBBLE_ARCH}.tar.gz{,.sha256sum}
sha256sum --check hubble-linux-${HUBBLE_ARCH}.tar.gz.sha256sum
sudo tar xzvfC hubble-linux-${HUBBLE_ARCH}.tar.gz /usr/local/bin
rm hubble-linux-${HUBBLE_ARCH}.tar.gz{,.sha256sum}

Now validate the hubble API Access

In order to access the Hubble API, create a port forward to the Hubble service from your local machine. This will allow you to connect the Hubble client to the local port 4245 and access the Hubble Relay service in your Kubernetes cluster.

# Use via cilium
cilium hubble port-forward

# use via kubectl
kubectl port-forward -n kube-system service/hubble-relay 4245:80

And lastly, you can view status and observe about hubble

# View status
hubble status

# Observe API
hubble observe

Hubble Status

Hubble observe

But if you don't view result of network traffic inside cluster via CLI, hubble offer us about using via web-ui. Use command below

cilium hubble enable --ui

Wait for minite, and use status command with cilium to view your ui is enabling

Use port-forward to expose web-ui to your localhost

# Use via cilium
cilium hubble ui

# Use port-foward of kubectl instead
kubectl port-forward -n kube-system service/hubble-ui 12000:80

You will hard to connect to vagrant host if you not attacked to vmbox, so instead of I use ssh-tunnel to connect hubble-ui

ssh -N -L 12000:127.0.0.1:12000 -i .vagrant/machines/k8s-master-machine/virtualbox/private_key vagrant@127.0.0.1 -p 6996

Now you can access http://localhost:12000 to view web-ui of hubble

Inspect real time with example when use connectivity scenarios

while true; do cilium connectivity test; done

Build and Operate High Availability (HA) Kubewekend Cluster

Read full article about session at Kubewekend Session 5: Build HA Cluster

Dive deeper into Kubelet

Honestly, kubelet is one of parts with most complicated and excited inside kubernetes and you need to spend many time understand what is behind the scene and what happen if your kubelet is dying, tough situation

kubelet usually run as service in system not run as workload in kubernetes, therefore if you want to see how kubelet service status, you can see via systemd inside machine

# Access vagrant host in control-plane
vagrant ssh k8s-master-machine

# After that access into docker where run `kind` engine inside
docker exec -it k8s-master-machine-control-plane /bin/bash

# Use can use journalctl, service or systemctl to make conversation to get information about kubelet
# With systemctl
systemctl status kubelet

# With service
service kubelet status

# With journalctl
journalctl -u kubelet | more # super detail

If you can see you can see anything about kubelet, like ID Memory Command CGroup and many things will help you debug the problems, when you want to understand and hardcore use journalctl to figure out all of thread inside 🥶

When you dive into kubelet as command this one run, you can see where configuration to perform kubelet because kubelet is binary for execution

/usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf \
--kubeconfig=/etc/kubernetes/kubelet.conf \
--config=/var/lib/kubelet/config.yaml \
--container-runtime-endpoint=unix:///run/containerd/containerd.sock --node-ip=172.18.0.3 --node-labels= \
--pod-infra-container-image=registry.k8s.io/pause:3.9 \
--provider-id=kind://docker/k8s-master-machine/k8s-master-machine-control-plane \
--runtime-cgroups=/system.slice/containerd.service

Following this configuration, you can image kubewekend cluster has

• As least one worker node will run inside control plane if you not define another one, that why we have kubelet inside control-plane image
• Use bootstrap kubeconfig at /etc/kubernetes/bootstrap-kubelet.conf - Will be empty because we don't use any bootstrap to build up
• Use kubeconfig at /etc/kubernetes/kubelet.conf - Define about context of cluster like certificate and address of cluster to connect
• Check about config at /var/lib/kubelet/config.yaml - Same as configuration if you have look on session via API
• Container runtime inside image use via containerd.sock - socket container like dockerd but lightweight, usually use both of them, it better together. Read more at: containerd vs. Docker: Understanding Their Relationship and How They Work Together
• Next we see that provide node-ip, really same as the network which provide for kind container
• Use pod-infra-container-image as pause:3.9 -  a container which holds the network namespace for the pod. Kubernetes creates pause containers to acquire the respective pod’s IP address and set up the network namespace for all other containers that join that pod. Read more at: What is the use of a pause image in Kubernetes?
• Obviously use kind control-plane because that worker will associate via kind
• And lastly, runtime-cgroups to help kubelet can know about how much resource provide and permit to use via containerd

Dynamic add nodes to kind cluster

The purpose of created HA is help us on split the workload inside Kubernetes, and run in multiple machine or VM. With that idea, this will not cause any damage when worker node have problems, such as upgrade kubernetes and keep no downtime for your services, and add-on we can have more things to practical, actually about write customize scheduler 😄

In the first time and from documentation of kind, kind purpose release for running locally kind cluster inside docker of one machine, and may dream can be come true as well i figure out that one possible to do. Check out supberb article, How to dynamically add nodes to a kind cluster of Steve Sklar

But not anything gonna easy when you join it, let't directly to see what happen

Not mount kernel to worker node

Now, we are starting, and first of all is create worker via using Docker command to create node with kind as container, but in the first time, you will stand between two situation down below

1. Succeed run kubelet

docker run --restart on-failure -v /lib/modules:/lib/modules:ro \
--privileged -h k8s-worker -d --network kind \
--network-alias k8s-worker --tmpfs /run --tmpfs /tmp \
--security-opt seccomp=unconfined --security-opt apparmor=unconfined \
--security-opt label=disable -v /var --name k8s-worker \
--label io.x-k8s.kind.cluster=kind --label io.x-k8s.kind.role=worker \
--env KIND_EXPERIMENTAL_CONTAINERD_SNAPSHOTTER \
kindest/node:v1.28.9

2. Failure run kubelet

docker run --restart on-failure \
--privileged -h k8s-worker -d --network kind \
--network-alias k8s-worker --tmpfs /run --tmpfs /tmp \
--security-opt seccomp=unconfined --security-opt apparmor=unconfined \
--security-opt label=disable -v /var --name k8s-worker \
--label io.x-k8s.kind.cluster=kind --label io.x-k8s.kind.role=worker \
--env KIND_EXPERIMENTAL_CONTAINERD_SNAPSHOTTER \
kindest/node:v1.28.9

What is different between of them ? Answer: Not mount the volume where define your host kernel

As you can see, you need to mount kernel configuration into container which used by kubelet to connect with your machine via -v /lib/modules:/lib/modules:ro

Actually if you want to know about kubelet techniques stand behind, check out

• driver of container runtime in cgroup and systemd part that components to control all process, resources inside the machine
• Explaining what is systemd and cgroup in Linux via article Medium - Systemd and cgroup

Now when you run docker container in successful, and now we have worker node but that stand loneliness, so you need join that container to control plane. Currently, Kubewekend cluster is using kind to operate control plane via kubeadm, Read more principle and concept of kind at kind Principles.

Following the step to create and join node in documentation, you can reproduce them inside kind via some steps

1. Create token

Create a token which managed via control plane, and provide suitable command with token to help you in joining worker or another control plane to clusters

docker exec --privileged k8s-master-machine-control-plane \
kubeadm token create --print-join-command

2. Join to control plane

# Exec into worker container
docker exec -it k8s-worker /bin/bash

# Join with command kubeadm
kubeadm join k8s-master-machine-control-plane:6443 \
--token xxxxxx --discovery-token-ca-cert-hash sha256:xxxxx --skip-phases=preflight

❗️ Error When you don't use param --skip-phases=preflight, your command join will fail for 100%, because kubeadm will run and your kernel in machine not exist configs file to load full information about your kernel, see down below

Parameter --skip-phases=preflight, this step will help you bypass preflight of kubeadm step, reach you init and others stories will work great

After you perform two step above, you actually join your worker node into clusters, retrieve that via command

kubectl get nodes

Story will become complex and pleasant on next part, another problems come up and you need actually to control your kernel and understand why it can't start your CNI and connect that with CNI and make your worker node become Not Ready state.

Can't not install cilium CNI inside worker node

Now we have problem not run CNI on worker node, you know kubernetes used auto discovery when have new node join to cluster, control plane will schedule to provide daemonset workload to inside worker node via kubelet and kube-apiserver, including

• kube-proxy ✅
• CSI - not have this feature currently ❌
• CNI - Cilium and actually problems in currently ❌

In the step to initialization the cilium and kube-proxy, kube-proxy work perfectly but CNI not run at all with multiple error number, sometime announce 2 or 137

# Check status and state of pod
kubectl get pods -n kube-system -w

# Use to deeper inspected
kubectl describe pods/cilium-xxxx -n kube-system # CrashLoopBack

Check status of kubelet service inside new worker node

# Exec with docker inside new node
docker exec -it k8s-worker /bin/bash

# Try to log the status of kubelet service via journalctl and systemctl
systemctl status kubelet

journalctl -xeu kubelet

When check it that announce about cilium - our CNI was be killed by PostStartHook event and cause FailedPostStartHook inside Kubewekend cluster

First I try to stop kubelet service by systemd of k8s-worker, use

systemctl stop kubelet

Next, try to run kubelet with command inside kubelet service with in refer in [[Kubewekend Session 5#Dive deeper into Kubelet|Dive deeper into Kubelet]] in previous part and force add node-ip because i think that cause problems

/usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf \
--kubeconfig=/etc/kubernetes/kubelet.conf \
--config=/var/lib/kubelet/config.yaml \
--container-runtime-endpoint=unix:///run/containerd/containerd.sock --node-ip=172.18.0.3 --node-labels= \
--pod-infra-container-image=registry.k8s.io/pause:3.9 \
--provider-id=kind://docker/k8s-master-machine/k8s-master-machine-control-plane \
--runtime-cgroups=/system.slice/containerd.service

But not the actually issue is really come up when I try to overview the error with huge information through what we got in running kubelet command.

And yup I detect about error make container crash in step run cilium-agent, see down-below

2710 kuberuntime_container.go:287] "Failed to execute PostStartHook" err="rpc error: code = Unknown desc = failed to exec in container: failed to start exec \"c3107b15e85a5b213e28a811b7341c153ec727ebf3c1a58b6c1d51bcd4f4e06b\": OCI runtime exec failed: exec failed: unable to start container process: error adding pid 3095 to cgroups: failed to write 3095: open /sys/fs/cgroup/unified/kubelet.slice/kubelet-kubepods.slice/kubelet-kubepods-burstable.slice/kubelet-kubepods-burstable-poda45947e4_314c_4694_8f05_5e1425a02de4.slice/cri-containerd-abb37780fc913b3720641a4039186adb06f5d1de0229de0e8707f12e2fde5a21.scope/cgroup.procs: no such file or directory: unknown" pod="kube-system/cilium-bsznc" podUID="a45947e4-314c-4694-8f05-5e1425a02de4" containerName="cilium-agent" containerID="containerd://abb37780fc913b3720641a4039186adb06f5d1de0229de0e8707f12e2fde5a21"

Something wrong inside the cgroups and cannot to giving pods cilium to create process and add them to group management. Try to search and access some issue in github - more information but useful 100%, and find out something can help as

• (arm64) OCI runtime exec failed: exec failed: unable to start container process: error adding pid 791507 to cgroups
• Kubernetes postStart lifecycle hook blocks CNI

From the idea of BenTheElder in the first issue link - whose maintain kind so he talk about Older version of kernel machine when you kind version. So let's think

• We have newest kind version - 0.23.0 ❌
• We install the cluster in node version 1.28.9, still update and not deprecated, so it not come up from cluster image ❌

Can I perform install kind in currently Ubuntu version ? Does it have any different ?

And that come up with actually warning

cgroupns not enabled! Please use cgroup v2, or cgroup v1 with cgroupns enabled.

Therefore, I try self-hosted kind on my machine in Ubuntu 22.04, with kernel version 6.5.0-44-generic and in vagrant machine with Ubuntu 20.04, with kernel version 5.4.0-189-generic. And It work when try to install cilium inside my Ubuntu with kernel version 6.5.0-44-generic and not work with vagrant. Really suspicious, LOL 😄

And yup it really have 😅, therefore try to figure out problem and check about requirement cilium

Cilium need me install Linux kernel >= 4.19.57 or equivalent (e.g., 4.18 on RHEL8) and luckily vagrant get to used it and one more, Ubuntu 20.04 is good enough with requirement on higher version 18.04.3

Try to setup with kind-config.yaml but add one more worker node, and try to install cilium and I does work, and now we know why the problem comeup

If you can see, cgroup v1 in-use with node pre-provisioning via kind-config and rasise any warning about cgroupns not enabled! Please use cgroup v2, or cgroup v1 with cgroupns enabled

BTW we can validate that not come from kernel version, or at least I don't know in this time and we know that have enough condition to run cilium inside worker node

And you will figure out our situation can perform to exchange, including

• Risk: Install new kernel inside your vagrant host, need to make sure you know are you doing
• Safe: Update a new version Ubuntu for vagrant host to receive a compatible version of kernel

So following the safe option, I choose upgrade Ubuntu to new version 20.04 --> 22.04 and received new version kernel from 5.4.0-189-generic to 5.15.0-116-generic. Read more at Update Ubuntu new version

Done And actually that resolve any problem you meet, so i think if you want to operate cilium at version 1.5 with old kernel you need downgrade your version of cilium, and do not use latest because of congestion inside the kernel

When redeploy and check log of worker node, as you can see it move on to using cgroup v2

You can relate this feature on cluster architecture on cgroup v2 at Kubernetes Documentation - About cgroup v2

Use vmbox to join worker node into master node

I know about there are more alternative out there which cut off the effort when self-hosted and join worker via kubeadm like

• kubespray - Deploy a Production Ready Kubernetes Cluster
• K3s - Lightweight Kubernetes. Easy to install, half the memory, all in a binary of less than 100 MB

Use vagrant again to create add one worker machine like we doing on session 1, if you are done with this step, reach to next 😄

Attach your machine with Nat Network

Following image, our machines is using NAT and it will not connect with others, so we need use alternative plan for networking, such as Bridged and NAT Network but recommend you use NAT Network with purpose learning and flexible than Bridged

First, I have practice with scripting for help you automation all step when hand on creating network and give machine interact, but many issue let me not image why 😿

• Vagrant make me so annoy when change new network configuration for adapter, worker node will lost all information SSH of host 😅
• When applied network, It causes your host stuck in boot state when you try shutdown and update new interface. Not actually methodology to check machine boot succeed or not

You can approach that inside script in hook-up-ip.sh, but you can meet the trouble for sure, not easily BTW 🤭. Feel free take your machine back with return-to-nat.sh

Therefore, to not waste your time, you can use UI for instead, not cover much but we can use both UI and CLI during progress

1. First of all create networks for whole VM in cluster follow step Choose Tools -> Network --> Choose NAT Networks Tab -> Click Create Button --> Change information in General Options

2. Choose network in configuration of VM, such as k8s-master-machine

3. On the network, in part attached to change from NAT --> NAT Network and select your network which you create

4. Approve and recheck inside the machine with provide new IP Address via DHCP, but at currently you can access host via vagrant, use VMBoxManage to retrieve info of machine. Documentation

   VBoxManage guestproperty get <vm-name> "/VirtualBox/GuestInfo/Net/0/V4/IP";

5. But before recheck, use need to port forward again for port to ssh inside that machine as Tools --> NAT Networks --> Choose name of NAT network --> Choose Port Forwarding in the bottom --> Click add rule --> Provide information for rule --> Apply

6. Access again with vagrant ssh and now you are connecting to k8s-master-machine via NAT Networking, but with k8s-worker-machine-x have some different to connect, you need use ssh instead because your ssh-config with vagrant is changing via host configuration

   # Use vagrant
   vagrant ssh k8s-worker-machine-1
   
   # Use SSH
   ssh -i .vagrant/machines/k8s-worker-machine-1/virtualbox/private_key \
   -o IdentitiesOnly=yes vagrant@127.0.0.1 -p 9669

Now you can validate connection between master and worker with ping command

# Exam: Master: 10.96.69.4, Worker: 10.96.69.5
ping -4 10.96.69.4 # From worker node
ping -4 10.96.69.5 # From master node

Now our host is connected, moving on to update kernel on two host to 5.15.0-116-generic and reaching self-hosted kubewekend cluster

# Update kernel
sudo apt install linux-virtual-hwe-20.04 -y

# Reboot and wait
sudo shutdown -r now 

Do some step with configuration cgroup

And now we will try run kind and worker node with docker in the second part of session [[Kubewekend Session 5#Dynamic add nodes to kind cluster|Dynamic add nodes to kind cluster]] and poorly we need to update your cluster to new one version because of 20.04 will change your kernel but cgroup v1 is still alive and do not use cgroup v2 and it makes our host can't be run cilium cni if not actually configuration

In the individual in upgrading kernel, It will not actually upgrade your cgroup to new version but your machine can be use cgroup v2 but need to configuration, therefore you have two optional

• Upgrade to new version, It means you can re-provisioning your machine with Ubuntu jammy 22.04 or use command to update. Vagrant Ubuntu 22.04
• Change daemon to enable cgroupns, and help your docker daemon can execute and understand what state of it

I know that will tough option which you need to choose, follow me if you don't want to cause any trouble you should choose option 1, but if you want to explore more about cgroup and systemd maybe options 2 can be best choice

As I can say, I will try hard path in this session, if you want to make option 1, please follow [[Kubewekend Session 5#Dynamic add nodes to kind cluster|Part 2]] of session to figure out how to upgrade OS 🙌

If you choose optional 2, you are brave men buddy. We will have two option in optional 2 and I can guide you at all and can be applied one of them if you want

• Continuous use cgroupv1 but enable cgroupns, and it can make sure your can be better to
• Applied cgroup v2 to try upgrade some configuration of systemd

With continuing use cgroupv1 and enable cgroupns, you can explore at: Systemd fails to run in a docker container when using cgroupv2 (--cgroupns=private), It will require you add more flag inside command to give your docker-daemon can enable cgroupns feature with flag

• --cgroup-parent=docker.slice : Specify custom cgroups, It means you can choose what cgroup running inside docker
• --cgroupns: cgroup namespace to use (host|private), and you need to change to private if you run own private cgroup namespace

docker run --restart on-failure -v /lib/modules:/lib/modules:ro --privileged \
-h k8s-worker -d --network kind --network-alias k8s-worker --tmpfs /run --tmpfs /tmp \
--security-opt seccomp=unconfined --security-opt apparmor=unconfined --security-opt label=disable -v /var \
--name k8s-worker --label io.x-k8s.kind.cluster=kind --label io.x-k8s.kind.role=worker --env KIND_EXPERIMENTAL_CONTAINERD_SNAPSHOTTER \
--cgroup-parent=docker.slice --cgroupns private \
kindest/node:v1.28.9

Now your container is running both cgroup v1 and cgroupns inside worker container, so how about cgroupv2 is actually work, answer is yes when you update new kernel for your machine you have cgroupv2 in the system but currently your host is not to use cgroupv2 as default, we will learn how to do that via update-grub and try to set worker node use cgroupv2

When you validate your host support cgroupv2, use grep and find at /proc/mounts

grep cgroup /proc/mounts

Or you can use grep with /proc/filesystems, explore at How do I check cgroup v2 is installed on my machine?

grep cgroup /proc/filesystems

If machine only support cgroupv1 you will not see any line cgroup2 and how you can adapt your machine into cgroupv2, you can modify grub and boot your host with level 2, It means disable cgroupv1 as default and only use cgroupv2

Following discussion Error: The image used by this instance requires a CGroupV1 host system when using clustering, in the line GRUB_CMDLINE_LINUX, try to add systemd.unified_cgroup_hierarchy=1 and try update grub again

# Open you host with grub
sudo nano /etc/default/grub

# Try to modify the line and update with
sudo update-grub

# Reboot to ensure again, not probably but good to you
sudo shutdown -r now

And now try to run worker node and see what is going on

docker run --restart on-failure -v /lib/modules:/lib/modules:ro --privileged -h k8s-worker -d --network kind --network-alias k8s-worker --tmpfs /run --tmpfs /tmp --security-opt seccomp=unconfined --security-opt apparmor=unconfined --security-opt label=disable -v /var --name k8s-worker --label io.x-k8s.kind.cluster=kind --label io.x-k8s.kind.role=worker --env KIND_EXPERIMENTAL_CONTAINERD_SNAPSHOTTER kindest/node:v1.28.9

Your host is currently use cgroupv2 and awesome 😄, follow this article to know more buddy cgroup v2

Connect your worker to master via kubeadm

If you catch up workflow, the part will last perform in this session, and we need to make sure your connection between master and worker machine

Warning

Because kind is not create to purpose when you can use between machine, we enforce kind to do it so that cause annoy when you failure, I know about that tough and vagrant host is not easily when change to NAT --> NAT Network

Therefore, just practice in this session because HA is not good with kind, maybe you use alternative tools can be better but kind is target and our competition in this series that why we need to pleasure with that one.

You need alternative Vagrantfile to prevent much annoy when you can't connect to VM when change new network, following new Vagrantfile to resolve the problem to connect worker vm via ssh

Change your network adapter of worker node to NAT and run vagrant reload to reconfiguration again

vagrant reload k8s-worker-machine-1

After running reload, you change again to natnetworks and check ssh-config, the surprise your ssh is keep not like as when you build your worker node in the loop and turn on autocorrect: true network

# Retrieve the ip and change that for portforwading rule
VBoxManage guestproperty get "k8s-worker-machine-1" \
"/VirtualBox/GuestInfo/Net/0/V4/IP" | cut -d ":" -f2 | xargs

Try ssh command

If you have problem, please destroy --> up your machine again to applied new network adapter. When you run ssh succeed into your host, run worker node but you need add more host to worker container because we need that can interact with machine because that give network can interact and connect via host at /etc/hosts. Read more at Add entries to container hosts file (--add-host)

docker run --restart on-failure -v /lib/modules:/lib/modules:ro \
--privileged -h k8s-worker -d --network kind --network-alias k8s-worker \
--tmpfs /run --tmpfs /tmp \
--security-opt seccomp=unconfined --security-opt apparmor=unconfined --security-opt label=disable \
-v /var --name k8s-worker \
--label io.x-k8s.kind.cluster=kind --label io.x-k8s.kind.role=worker \
--env KIND_EXPERIMENTAL_CONTAINERD_SNAPSHOTTER \
--add-host "host.docker.internal:host-gateway" \
kindest/node:v1.28.9

Now you run succeed container and you need to exec some command inside to check your host can interact with master node

docker exec -it k8s-worker /bin/bash

In you master machine, host simple webserver with python to see they can interact with others inside worker container

# In master node
python3 -m http.server 9999

# In container worker node run command to hit webserver in port 9999. For example, IP of master will 10.0.69.15, you can
curl 10.0.69.15:9999

Change configuration inside kubeadm of master node to success provide right token connection string for worker node join into

First of all, try connect to your master container

docker exec -it k8s-master-machine-control-plane /bin/bash

Now find your kubeadm configuration and try to add your host to make your node can interact with master IP

kubectl -n kube-system get configmap kubeadm-config -o jsonpath='{.data.ClusterConfiguration}' > kubeadm.yaml

apiServer:
  certSANs:
  - localhost
  - 0.0.0.0
  extraArgs:
    authorization-mode: Node,RBAC
    runtime-config: ""
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubewekend
controlPlaneEndpoint: kubewekend-control-plane:6443
controllerManager:
  extraArgs:
    enable-hostpath-provisioner: "true"
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.k8s.io
kind: ClusterConfiguration
kubernetesVersion: v1.28.9
networking:
  dnsDomain: cluster.local
  podSubnet: 10.244.0.0/16
  serviceSubnet: 10.96.0.0/16
scheduler: {}

As you can see only 0.0.0.0 and localhost as we discussion, so you nano try add your host IP below list in certSANs

apiServer:
  certSANs:
  - localhost
  - 0.0.0.0
  - 10.0.69.15
  extraArgs:
    authorization-mode: Node,RBAC
    runtime-config: ""
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubewekend
controlPlaneEndpoint: 10.0.69.15:6443
controllerManager:
  extraArgs:
    enable-hostpath-provisioner: "true"
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd
imageRepository: registry.k8s.io
kind: ClusterConfiguration
kubernetesVersion: v1.28.9
networking:
  dnsDomain: cluster.local
  podSubnet: 10.244.0.0/16
  serviceSubnet: 10.96.0.0/16
scheduler: {}

Now move the old certificates to another folder, otherwise kubeadm will not recreate new ones

mv /etc/kubernetes/pki/apiserver.{crt,key} ~

Use kubeadm to generate new apiserver certificates

kubeadm init phase certs apiserver --config kubeadm.yaml

Delete pod kube-apiserver or use can use kill -9 to delete process of kube-apiserver

# Some time be in stuck and not know reason :)
kubectl delete pods -n kube-system kube-apiserver-k8s-master-machine-control-plane

# Try with ps
ps aux | grep -e "kube-apiserver"

# Kill your process with attach for kube-apiserver
kill -9 <pid>

After try update new configuration to configmap

kubeadm init phase upload-config kubeadm --config kubeadm.yaml

And before generate token, you need to change cluster-info to help worker can fetch this one and applied to worker. Read more at kubeadm join failed: unable to fetch the kubeadm-config ConfigMap

Issue ask me about to reconfiguration both kubeadm.yaml (Done) but configmap of cluster-info is not upgrade, so we need to update that, but first retrieve that with command

kubectl get cm cluster-info -o yaml -n kube-public

Currently server is not configuration to IP so we need to edit that we can use kubectl edit to update configmap

# Change default editor to nano
export KUBE_EDITOR=nano

# Edit config map
kubectl edit cm cluster-info -n kube-public

After save and update, we reload kube-apiserver and kubelet of master node if needed but first try with kube-apiserver as kill container

kubectl delete pods/kube-apiserver-kubewekend-control-plane -n kube-system

and now you can generete join command and connect worker to master

# Master
docker exec --privileged k8s-master-machine-control-plane \
kubeadm token create --print-join-command

# Worker
# Exec into worker container
docker exec -it k8s-worker /bin/bash

# Join with command kubeadm
kubeadm join k8s-master-machine-control-plane:6443 \
--token xxxxxx --discovery-token-ca-cert-hash sha256:xxxxx --skip-phases=preflight

And finally we can connect addition worker host into master, that is huge progress to get this result

But your CNI need to change something to succeed fully work, because of timeout when try connect to apiserver with dns mapping

time="2024-07-28T15:07:03Z" level=info msg=Invoked duration=1.530641ms function="github.com/cilium/cilium/cilium-dbg/cmd.glob..func39 (cmd/build-config.go:32)" subsys=hive
time="2024-07-28T15:07:03Z" level=info msg=Starting subsys=hive
time="2024-07-28T15:07:03Z" level=info msg="Establishing connection to apiserver" host="https://10.96.0.1:443" subsys=k8s-client
time="2024-07-28T15:07:38Z" level=info msg="Establishing connection to apiserver" host="https://10.96.0.1:443" subsys=k8s-client
time="2024-07-28T15:08:08Z" level=error msg="Unable to contact k8s api-server" error="Get \"https://10.96.0.1:443/api/v1/namespaces/kube-system\": dial tcp 10.96.0.1:443: i/o timeout" ipAddr="https://10.96.0.1:443" subsys=k8s-client
time="2024-07-28T15:08:08Z" level=error msg="Start hook failed" error="Get \"https://10.96.0.1:443/api/v1/namespaces/kube-system\": dial tcp 10.96.0.1:443: i/o timeout" function="client.(*compositeClientset).onStart" subsys=hive
time="2024-07-28T15:08:08Z" level=info msg=Stopping subsys=hive
Error: Build config failed: failed to start: Get "https://10.96.0.1:443/api/v1/namespaces/kube-system": dial tcp 10.96.0.1:443: i/o timeout

And issue be resolved via some issue and documentation, help us reconfiguration CNI with Cilium

• Kubernetes Without kube-proxy
• Unable to contact k8s api-server and Unable to initialize Kubernetes subsystem

So we will uninstall CNI and try to install again with right configuration

# Uninstall Cilium out of cluster
cilium uninstall --wait

# Install again with configuration
# E.g: Kubeapi-server IP: 10.0.69.15 and Port: 6996
cilium install --version 1.15.6 --set k8sServiceHost=10.0.69.15 --set k8sServicePort=6996

And after applied we have ready node as we expected