Klipper Config for XoneFobic's Ender 3 v2

SLICER

As I use superslicer, all settings in this section are aimed for it.
Convert them as needed to your slicer of choice.

Print Settings

As I enable ArcWelding in the klipper settings, I also add it to the Post-processing script in the Output options section.
Look in the docs of the ArcWelder script you're using to know what to apply here.
I use the Windows version of ArcWelderLib by FormerLurker. In this case just add C:\path\to\bin\ArcWelder.exe to the Post-processing script section.

Filament Settings

Start G-code

Obviously, change these values as needed.

; Polymaker Polylite PLA
SET_PRESSURE_ADVANCE ADVANCE=0.0275

Printer settings

Within the General tab, make sure to turn on Use relative E distances. The START_PRINT and PRIME_LINE macro are set up to be relative instead of absolute.

Start G-code

START_PRINT BED_TEMP=[first_layer_bed_temperature] EXTRUDER_TEMP={first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}

End G-code

END_PRINT

Before layer change G-code

;BEFORE_LAYER_CHANGE
G92 E0
;{layer_z}

MODS

Applied Mods that could affect settings / print quality

• BLTouch
• Direct Drive Conversion
  • Dragonfly BMS (Phætus)
  • Orbiter v1.5 Extruder (Thingiverse | AliExpress) Make sure to get the LDO stepper!
  • Custom Voron Afterburner (Repo will be added once the STEP files are clean)
• Copper plated nozzle (Phætus | Duckleberry (Netherlands))
• 50W heater cartridge (AliExpress)
• 10HT500T based thermostat (Max 500°C) (AliExpress)
• Smooth PEI Flex Plate (AliExpress)
• Yellow dot squash ball feet

Mods in progress

• Voron Switchwire conversion

Planned Mods

• Belt conversion (Lead Screw Delete) (Thingiverse (Original) | Thingiverse (Beefy Upgrade))
• Upgraded mainboard
• New wire harness
• Reprint all printed parts in ABS or ASA
• Enclosure

Retired Mods

• Voron M4 (VoronDesign)
  • Voron M4 Direct Drive conversion (Thingiverse)