Linux running on the Surface Book, Surface Book 2, Surface Go, Surface Pro 3, Surface Pro 4, Surface Pro 2017, Surface Pro 6, Surface Laptop and Surface Laptop 2. Follow the instructions below to install the latest kernel and config files.
- Keyboard (and backlight)
- Touchpad
- 2D/3D Acceleration
- Touchscreen
- Pen
- WiFi
- Bluetooth
- Speakers
- Power Button
- Volume Buttons
- SD Card Reader
- Cameras (partial support, disabled for now)
- Hibernate
- Sensors (accelerometer, gyroscope, ambient light sensor)
- Battery Readings
- Docking/Undocking Tablet and Keyboard
- Surface Docks
- DisplayPort
- USB-C (including for HDMI Out)
- Dedicated Nvidia GPU (Surface Book 2)
- Dedicated Nvidia GPU (if you have a performance base on a Surface Book 1, otherwise onboard works fine)
- Cameras (not fully supported yet)
- Suspend (uses Connected Standby which is not supported yet)
- For the most part, things are tested on a Surface Book. While most things are reportedly fully working on other devices, your mileage may vary. Please look at the issues list for possible exceptions.
Downloads for ubuntu based distros (other distros will need to compile from source using the included patches):
https://github.com/jakeday/linux-surface/releases
You will need to download the image, headers and libc-dev deb files for the version you want to install.
- (Prep) Install Dependencies:
sudo apt install git curl wget sed
- Clone the linux-surface repo:
git clone --depth 1 https://github.com/jakeday/linux-surface.git ~/linux-surface
- Change directory to linux-surface repo:
cd ~/linux-surface
- Run setup script:
sudo sh setup.sh
- Reboot on installed kernel.
The setup script will handle installing the latest kernel for you. You can also choose to download any version you want and install yourself: Install the headers, kernel and libc-dev (make sure you cd to your download location first):
sudo dpkg -i linux-headers-[VERSION].deb linux-image-[VERSION].deb linux-libc-dev-[VERSION].deb
If you don't want to use the pre-built kernel and headers, you can compile the kernel yourself following these steps:
- (Prep) Install the required packages for compiling the kernel:
sudo apt install build-essential binutils-dev libncurses5-dev libssl-dev ccache bison flex libelf-dev
- Clone the mainline stable kernel repo:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git ~/linux-stable
- Go into the linux-stable directory:
cd ~/linux-stable
- Checkout the version of the kernel you wish to target (replacing with your target version):
git checkout v4.y.z
- Apply the kernel patches from the linux-surface repo (this one, and assuming you cloned it to ~/linux-surface):
for i in ~/linux-surface/patches/[VERSION]/*.patch; do patch -p1 < $i; done
- Use config for kernel series (may need to manually change for your distro):
cp ~/linux-surface/configs/[VERSION]/config .config
- Compile the kernel and headers (for ubuntu, refer to the build guide for your distro):
make -j `getconf _NPROCESSORS_ONLN` deb-pkg LOCALVERSION=-linux-surface
- Install the headers, kernel and libc-dev:
sudo dpkg -i linux-headers-[VERSION].deb linux-image-[VERSION].deb linux-libc-dev-[VERSION].deb
Have a look at this repository.
Please consult the SIGNING.md.
- If you are getting stuck at boot when loading the ramdisk, you need to install the Processor Microcode Firmware for Intel CPUs (usually found under Additional Drivers in Software and Updates).
- Do not install TLP! It can cause slowdowns, laggy performance, and occasional hangs! You have been warned.
If you have an issue with the kernel, please feel free to create on issue here to track it. If you have questions or need support, please use our Gitter Community!
PayPal: https://www.paypal.me/jakeday42
Bitcoin: 1AH7ByeJBjMoAwsgi9oeNvVLmZHvGoQg68