#TeeUniverse
TeeUniverse is a free and open-source game offering powerful and robust support for playing online various gamemodes and playgrounds.
sudo apt-get install build-essential git cmake libfreetype6-dev libharfbuzz-dev libsdl2-dev libicu-dev
Download the sources using git:
git clone https://github.com/teeuniverse/teeuniverse.git
cd teeuniverse
Compile the project:
cmake .
make
Execute the TeeUniverse editor:
cd ./build/release/linux
./teeuniverse_editor
Follow the instructions to install MacPorts, then install all libraries using this command:
sudo port install cmake git freetype harfbuzz harfbuzz-icu libsdl2 icu
Download the sources using git:
git clone https://github.com/teeuniverse/teeuniverse.git
cd teeuniverse
Compile the project:
cmake .
make
Execute the TeeUniverse editor:
cd ./build/release/osx
./teeuniverse_editor
Download CMake from its official webpage. If you are using Windows 32-bit, download this installer (official download page). If you are using Windows 64-bit, download this installer (official download page)
Execute the downloaded MSI file and install CMake. Defaults options are fine.
Download the sources from GitHub (ZIP file) and extract the content of this archive in your computer. We will refer to this extracted directory as "TeeUniverse directory"
Download all needed libraries and sources from the official website of TeeUniverse (ZIP file), and extract the content of this archive in the TeeUniverse directory.
Your TeeUniverse directory should look like this:
Execute CMake (cmake-gui).
Click on "Browse Source..." and select the TeeUniverse directory.
Click on "Browse Build..." and select the TeeUniverse directory.
Click on "Add Entry" again, fill the "Name" field with "WITHOUT_HARFBUZZ", the "Type" field with "BOOL", keep the "Value" field empty. Click on "OK"
Click on "Configure". Check that "MinGW Makefiles" is selected and click on "Finish". Other generators maybe be possible to use, but has not been tested yet.
Click on "Generate".
Your CMake Window should look like this:
You can now close CMake.
Execute MinGW Command Prompt and type the following command to go in the TeeUniverse directory (please replace "C:\path\to\teeuniverse\directory" by your actual path to the TeeUniverse directory):
cd C:\path\to\teeuniverse\directory
Type the following command to compile TeeUniverse in 32-bit (TeeUniverse may be compatible with 64-bit compilation but was never tested. Please use this command even if you are using Windows 64-bit):
mingw32-make
Type the following command to execute TeeUniverse editor:
cd build\release\win
teeuniverse_editor.exe