Description

This project demonstrates, how the stm32-platform could be used with a toolchain, based entirely on gcc and used with the meson build-system. It simply just contains a small blinky-example.

Requirements

Please ensure that the following tools are available on your system

• Arm-none-eabi build tools (gcc, gdb, binutils)
• Meson-build
• Stlink
• Openocd (for debugging)

How To

Compile

Choose a cross-compilation file or build your own, depending on the available development-board.

Simply execute:

$ meson setup --cross-file=stm32f407xx.cross build_f4
$ meson compile -C build_f4

Flash

Either use the specific build-target: $ meson compile -C build_f4 flash Or simple use stlink by yourself: $ st-flash --reset write ./build_f4/sr/main.bin 0x8000000

Detecting your device

If stlink has problems, ensure that the connection is up and the device is detected by the stlink software. You can do this by the following command: st-info --probe

Debugging

You can debug your code, with openocd:

$ openocd -f /usr/share/openocd/scripts/board/stm32f4discovery.cfg

# On a different terminal:
$ arm-none-eabi-gdb
(gdb) file build_f4/src/main.elf
(gdb) target remote localhost:3333
(gdb) n

Or simply follow the instructions from here: https://stackoverflow.com/q/38033130/4918084

Please note: For the WeAct v3.0, I had to change the reset_config to none, as suggeset here: https://stackoverflow.com/a/49195787/4918084

Alternative, using st-utils: https://github.com/stlink-org/stlink/blob/develop/doc/tutorial.md#using-the-gdb-server

Support

Currently, the toolchain has been tested on the following devices and development boards:

• WeAct V3.0 (STM32F401CCU6)
• NUCLEO32-L031K6 (STM32L031K6)
• NUCLEO32-G431KB (STM32G431KB)

Participating

Please feel free open issues and pull-requests on the project. My personal number of development boards is just limitteted. So if you have different boards and proved a cross-compilation file or even more examples, do not hesitate to make them available!

The possibly available nucleo-platforms are listed here: https://www.st.com/en/evaluation-tools/stm32-nucleo-boards.html

The repository is available here: https://github.com/amibranch/stm32_meson_blinky.git