lucigui is a Svelte based JavaScript Single Page Web Application for LUCIDAC. LUCIDAC lacks the classical analog computer cable-based interface, and this is the first graphical interface for a reprogrammable analog computer.
This is the README file for the Svelte based single page web application (SPA) to configure and program the LUCIDAC, called lucidac-gui. The application behaves "just as another" LUCIDAC client, i.e. the LUCIDAC does not rely on this particular application. However, all other existing client implementations so far (for insance written in Python, Julia, Matlab or C/C++) concentrate on the terminal (command line interface), that is, they do not have a graphical user interface. This is where this application differs most.
- Talks to LUCIDACs via HTTP
REST APIWebsockets. Requires suitable LUCIDAC firmware branch. - Can be used while being connected to a LUCIDAC but also in headless mode, where most functions are still available. The client can connect to any suitable LUCIDAC or no LUCIDAC at all.
- When connected to a LUCIDAC, allows to
- display basic system information (such as firmware version, uptime, etc.)
- show and edit persistent microcontroller configuration (networking, access control, etc)
- (planned) do a factory reset, upgrade the firmware
- provide an easy access to outgoing help links to the system documentation and programming guides
- As a unique feature, it powers a powerful visual programming experience for configuring the
analog wiring in the LUCIDAC straight out of the browser, featuring various completely synchronized
and editable views, including
- a graphical circuit editor
- a graphical matrix editor
- (planned) probably a DDA code editor in the future
- Both settings and circuit configuration can be imported and exported as JSON files.
- The application ships with a built-in set of example circuits as well as help texts.
A TCP/IP socket "endpoint" is characterized by an IP-address/hostname and a port, for instance
192.168.1.2 and 573. This standard is of course also used in traditional LUCIDAC JSON-Lines "raw TCP protocol"
clients. In contrast, this client uses HTTP websockets which define their endpoints as URLs. In websocket world,
these URLs have the schema ws or wss (if SSL is used). As LUCIDACs currently do not support SSL, ws
is the only supported schema. The websocket URL is basically what comes out when your replace the http
in something like http://192.168.1.2/some/path with ws. The path in the URL is, by definition, always
/websocket in the embedded LUCIDAC webserver. However, it can (in future) also be explored by the network
status query or settings.
Furthermore, if you want to connect to a LUCIDAC without websocket support, you can elevate the protocol by yourself. This works the same as a serial2tcp converter/proxy. Suitable codes shall presented here in the future.
The code was written in Typescript, which compiles to Javascript,
the defacto programming language for applications running in web browsers. It ships with a standalone
Typescript hybrid controller client called lucicon which serves
as a javascript client for the JSONL lucidac protocol.
This client can also be used in other Javascript/Typescript clients in any modern Javascript ecosystem such as
node or deno.
The actual SPA web application is using the precompiled reactive web framework Svelte and the JS build tool Vite. npm is used for library managament. We use the svelte-spa-router instead of SvelteKit. For the graphical programming, we currently stick to Svelte Flow.
For the records, the project was boostrapped with npm create vite@latest.
The fundamental idea is written in #58: Simple Webserver for LUCIDAC and summarized in the following.
We want a simple SPA with static HTML files which makes self-hosting of the compiled code trivial. This code is supposed to be served straight from the firmware of the LUCIDAC, i.e. included into the hybrid controller firmware image. This is primarily in order to be able to use it also when the LUCIDAC is used in an isolated/offline network and to avoid vendor dependencies. A webserver hosting this SPA provides the following benefits:
- Simplifies finding LUCIDAC in network and to do "first steps"
- Simplifies device configuration for non-CLI experienced people or administrators
- People expect this, think of a web gui for any modern network-enabled printer. They allow you to configure the device and see its status.
- It also opens the world for javascript analog programming. People could also do this with node.js and friends, but with a real HTTP endpoint it is easier and more convenient.
The HTTP endpoint is a simple adapter which elevates the JSONL "raw" TCP/IP protocol via HTTP/1.1 to the websocket protocol. The LUCIDAC-embedded webserver serves a few static files and allows the HTTP protocol upgrade. Note that both JSONL and websockets are message oriented protocols which allow true bidirectional communication, so there is little work involved matching these two protocols.
The following design decision have been made in terms of security:
- As a guiding principle, the firmware webserver has no HTTPS, which is always dysfunctional in non-public networks.
- Cross-Origin Resource Sharing (CORS) is the primary security measure for protecting the LUCIDAC HTTP endpoint against unwanted access. It is one more configuration option for the LUCIDAC networking.
- The simple user-password access system is straightforwardly elevated on the websocket protocol.
This is an open source code released under MIT OR GPL license. The code is copyright by anabrid, see https://www.anabrid.com/licensing/ or LICENSE.md for details.
We currently follow this model:
- "Vendor code" comes from https://lab.analogparadigm.com/lucidac/software/lucidac-gui where there is also an issue tracker and the continous integration.
- Open source release happens at https://github.com/anabrid/lucidac-gui as a gitlab-to-github mirror which however only covers the git repository, not the issues and CI. This is not perfect, but allows people to fork, open issues and even put push requests anyway.
There are two deployment routes:
- The headless "variant" of the code built and uploaded to https://lucidac.online/ by Gitlab-CI.
- The LUCIDAC "variant" is made available as Gitlab-CI build artifacts and integrated into the firmware at firmware build time. This is made by embedding individual gzipped files as bytestring objects.
The different behaviour is steered by variables defined at "svelte startup time" in the index.html file. Therefore, in principle only one svelte built is neccessary for the two variants, despite this is implemented as two different build in .gitlab-ci.yml for convenience.
Gzipped code size of the compiled project is currently about 500kB. We strongly try to keep this as low as possible (the magical barrier is 1MB of zipped build size).
Make sure you have a running version of nodejs or in particular npm, the node package manager.
- Clone the repository (for instance from https://github.com/anabrid/lucidac-gui)
- Go to the repository root directory and run
npm installin order to install the project dependencies locally. - In order to start the development webserver and open your web browser:
npm run dev --open
If you want to build the compiled code locally, run npm run build.
Afterwards, you can serve the code without any node dependency for instance with cd dist && python -m http.server.
For documenting, we use the TSDoc standard. For unit testing,
we use the vitest testing framework (npm run test).
npm run release-- creates a release (git tag+package.json; Gitlab-Release is done in CI)npx vite-bundle-visualizer-- allows to inspect a bundle and identify wasteful dependencies or problems in tree shaking
If you want to use an IDE, we suggest to use vscode or IntelliJ with the svelte plugins for developing.
When debugging in browser, the JavaScript console is your friend. While Svelte components are not easy to examine,
our modules expose some variables in the window scope, that means you can do something like
hc.remote.query("status)
get(hc.endpoint)
and similar. Note that you can also load ECMASCript modules via something like
var hc; import("http://localhost:5173/src/HybridController/connection.ts").then(module => { hc = module; })
await hc.query("status)