Skip to content

Latest commit

 

History

History
404 lines (337 loc) · 16.3 KB

DOCS.md

File metadata and controls

404 lines (337 loc) · 16.3 KB
Raw

.dotfiles

Goal: Super fast terminal based dev environment

Worfklow:

  • go to places i visit less often
    • could use fuzzy finder
  • go to places i go to all the time
    • would expect single key-stroke to get there
  • go into editing

Must have plugins to note:

  • fzf (for zsh)
  • telescope
  • harpoon
  • vim-fugitive
  • hop

Yabai:

Setup instructions

Note: Remember that most dotfiles has a place somewhere. Make sure they point/symlink to the links inside this dotfile repo. Use the ln -s <actual existing filepath> <this will point to existing file filepath> to create a symlink This must be done for (might be missing some):

  • nvim (located in ~/.config/nvim)
  • vimrc
  • zshrc
  • .zsh_profile
  • alacritty.yml (located in ~/.config/alacritty)
    • ln -s ~/.dotfiles/alacritty ~/.config/alacritty
  • fish (located in ~/.config/fish)
    • ln -s ~/dotfiles/fish/ ~/.config/fish
  • starfish (located in ~/.config/starfish.toml)
    • ln -s ~/dotfiles/staship.toml ~/.config/starship.toml
  • neofetch (located in ~/.config/neofetch/config.conf)
    • ln -s ~/dotfiles/neofetch ~/.config/neofetch Also for ll scrips/executable u need to make it executble and giev u access chmod u+x filepath
  • make sure to remap capslock to control

To check the symlinks go to .config and exa will show the following:

lrwxr-xr-x  40 anderskampenes 10 Dec  2022 alacritty -> /Users/anderskampenes/dotfiles/alacritty
drwxr-xr-x   - anderskampenes  9 Mar  2022 coc
drwxr-xr-x   - anderskampenes 13 Nov  2022 com.filestar.macos
drwx------   - anderskampenes 15 Oct 18:32 configstore
lrwxr-xr-x  36 anderskampenes 28 Dec  2022 fish -> /Users/anderskampenes/dotfiles/fish
drwxr-xr-x   - anderskampenes 17 Jun  2020 gcloud
drwx------   - anderskampenes 30 Dec  2022 github-copilot
drwx------   - anderskampenes 27 Sep  2022 htop
drwxr-xr-x   - anderskampenes  6 Jun  2022 iterm2
lrwxr-xr-x  39 anderskampenes 29 Dec  2022 neofetch -> /Users/anderskampenes/dotfiles/neofetch
lrwxr-xr-x  35 anderskampenes  5 Jun  2022 nvim -> /Users/anderskampenes/dotfiles/nvim
drwxr-xr-x@  - anderskampenes 11 Jun 18:48 raycast
lrwxr-xr-x  44 anderskampenes 28 Dec  2022 starship.toml -> /Users/anderskampenes/dotfiles/starship.toml
drwxr-xr-x   - anderskampenes 11 Jul  2022 yarn

Git workree > stash and checkout

  • use git-worktrees to have multiple workspaces open at all times
    • good explanation here
  • all workspaces are added to ./worktrees folder for convinience (so they dont float around)
    • simply cd into one of the workspaces to work on it and the active branch inside it
    • NB! Remember to add ./worktrees to .gitignore
  • use 3 workspaces per repo
    • m (main/master)
    • wb (working-branc)
    • hotfix
  • consider using the git-worktree.nvim
  • commands
    • git worktree list
    • git worktree add
    • git worktree remove

Git diff

  • use Gvdiff <some_commit_sha> to see diff between current commit and other commit
  • use Gvdiff HEAD~1 to see diff between current commit and previous commit
  • use Gvdiff master to see diff between current commit and master
  • use :G difftool --name-only master to get all changed files between current commit and master
  • use :G difftool --name-only HEAD to get all changed files between current commit and last commit
  • use :G difftool --name-only <some_commit_sha> to get all changed files between current commit and other commit

🙇 Worth remembering

MaC defaults

🤷 TODO look into

💡 Currently experimenting with

  • use harpoon quicktoggle more
  • keep gitsigns as is or revert to oldschool?
  • use trouble or loclist for error/warnings?
  • use aerial as tagbar alternativ. overrides { and } but i usually dont use that anywhat
  • use fs to search for functions and symbolds -insp here and here

😩 Existing painpoints

  • zsh and tmux terminals
    • cannot use vim commands to edit vims :term commands. It only focus on the end of the input command, not where the cursor is. So the solution here is to try to use harpoon to write most commenly used commands and limit the writing in the .term. see issue at github
  • zsh and tmux and neovim terminals not 100% sure on optimal flow
  • [○] workflow
    • [✓] context switching overhead: to many tabs to keep track of for frontend + server + misc
    • [✗] cannot open random tmux panes
    • [✗] ff does not work anymore
  • eslint warning does not work properly in placepoint monorepo
    • YES IT DOES. i just need to do LspInstall eslint
  • tsx colors not working
  • lss.references opens quiqlist
  • want to make a selction bord OR in general add "more stuff to surround" at the same time

📈 Monitoring

  • htop or tiptop
    • (cant descide which one to use)
  • tmux session monitoring TODO i need this!!!

👨👨👦👦 Tmux

  • can create a server that re-uses buffers.
  • currently i have to
    • either close and repoen nvim all the time and 'start form frach'
    • have a shitton of tabs etc open

Alfred

  • move to applications quickly
  • search folders in finder (cmd+space -->cmd+space --> alfre preferences preferences--> features --> default results)
  • search a file (not folder) by prefixing space

Raycast

  • better but alot of unessesarry stufffff

Shell

  • use fish
  • use starship for a nice and easy prompt
    • @todo: add a nice battery prompt (?)

Pomodoro timer

  • used for maximum focus in short bursts
  • also benifitial for taking breaks to keep the efficiency up
  • hypototy:
    • time used is proportional to the time one has
    • reduce time and remain as efficient
    • net win on time/work ratio
  • https://github.com/olimorris/tmux-pomodoro-plus
  • @todo: add a popup for showing the timer in big-view see implementation here
  • @todo: add notifications
  • commands
    • z pomodoro-countdown
    • python pomodoro-timer.py

Tmux

  • use tmp as tmux plugin manager
  • located in ~/.tmux/plugins/tpm
  • install via git clone https://github.com/tmux-plugins/tpm ~/.tmux/plugins/tpm
  • copy plugins and install via prefix-I

LSP

  • lsp is for smart language stuff. use :Lsp... in vim to get options
  • nvim-lsp-installer installs and manages lsp servers
    • also provides a graphic interface. use :LspInstallInfo to see it
  • lsp_config has some sane efalt configs for us
    • users that to setup a variaty of servers
  • for different languages see https://github.com/neovim/nvim-lspconfig/blob/master/doc/server_configurations.md#tsserver
  • or see :help lspconfig-all
  • install lua-language server via brew install lua-language-server
  • install tailwindcss-language-server via brew install tailwindcss-language-server

Treeesitter and heighlighting

  • we use nvim-lsp-installer to install language servers
    • do :LSPInstall <some_laguage> to install get a popup about a relevant language server
  • Treesitter is used fro syntax higlghtihng etc. use :TsInstall typescript5 etc to make sure higlighting is installes
    • nvim-treesitter gives Neovim better language parsing capabilities. The most noticeable improvement is a better and more precise syntax highlighting, but it also brings other improvements to folding and indentation. It does that by building a syntax tree of our code rather than relying on regexps and patterns
  • IMPORTANT: tsserver will not work unless we run :TSInstall tsx and :TSInstall typescript and :TSInstall typesscripInstall typesscript (jsx does not xist)

Ideas

  • mikael div higlighting
  • create own colorschema create own colorschema ondark exaple
  • use less color on if statements etc and make variables and functions POP. more black background

get path (pwd like stuff)

  • DONE see the the maps section

neotree

orgmode???

TAGs??

  • not using it atm

renaming and file path update on neotree movement

should i use nvim-cmp

tiling manager and mac shortcuts

Swithcing to fish

Switching to fish? (see docs)

If you wish to use fish (or any other shell) as your default shell, you need to enter your new shell's executable /usr/local/bin/fish in two places:

  • add /usr/local/bin/fish to /etc/shells
  • change your default shell with chsh -s to /usr/local/bin/fish

You can use the following commands for this:

Add the fish shell /usr/local/bin/fish to /etc/shells with: echo /usr/local/bin/fish | sudo tee -a /etc/shells

Change your default shell to fish with: chsh -s /usr/local/bin/fish

fisher

We also use fisher plugin manager. It is more barebone than oh-my-fish and is more like npm where oh-my-fish is a actual framework

fish.fzf

  • see documentation here
  • nice way to show fuzzy search
  • used for control-r
  • and for displaying the tmux session and file explorer
  • instead of piping to ilc fzf we can pipe to _fzf_wapper e.g ls | _fzf_wrapper
  • OR just use the native popup in fzf that the _fzf_wrapper by just adding fzf --border --height=90% --preview-window=wrap --layout=reverse

Zoxide

  • zoxide is a smarter cd comman
  • install brew install zoxide
  • add zoxide init fish | source to config.fish
  • use z to go directly to folders you have visited before

FISH Alot of usefull hints here

Especially directory movement

Several commands are provided to interact with this directory history:

dirh prints the history

cdh displays a prompt to quickly navigate the history

prevd moves backward through the history. It is bound to Alt+←

nextd moves forward through the history. It is bound to Alt+→
  • control + l clears + repaints the screen
  • o

if path is lost restore by https://stackoverflow.com/questions/15872666/how-to-remove-entry-from-path-on-mac

  • export PATH="/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin"

chrome debugger

  • use cntr+p to get commends
    • show console/network/elements etc

chrome

Fortune | Cowsay

  • cool asci drawing.Fortune creates text that we pipe into cowsay
  • run by fortune | cowsay
  • add to fish greeting by configurating fish/functions/fish_greeting.fish

Neofetch

  • check out some cool configurations here
  • run by neofetch
  • configure in neofetch/config.conf

Image viewer in shell

  • builtin command qlmanage -p <path> opens a popup in full-size that can be escaped awy
  • e.g qlmanage -p ~/documents/backgrounds/background.jpegqlmanage
  • we alias this to img <path>

vim-startify

  • keeps bookmarks and easy access to reasonly used files and bookmarks
  • good for easy acces to dotfiles, work and side-projects

colros and higlightgroups

  • to see all highlilght groups do :hl
  • to filter based on seach do :filter /NeoTree/ highlight
  • to change a highlight group do vim.api.nvim_set_hl(0, 'NeoTreeGitModified', { fg="#5DBBC1" })

keyboard speed

  • go to system settings and make sure the keyboard delays are as fast as possible

change colorscheme colors

  • go to .local/share/nvim/site/packer/packer/start
  • go into the lua and replace the defautl sedction of edge with the on e under nvim/color/edge

fun

  • cmatrix

sketchybar

  • run sketchybar --config $HOME/side-projects/SketchyBar/sketchybarrc
  • could also set upt the path as described here https://felixkratz.github.io/SketchyBar/setup
  • to add a plugin:
    • create a folder in plugin
    • make it executable with chmod +x or chmod 755
    • now i t can be added as the other plugins

resizing nvim splits

  • added mappings
  • vert resize: <leader> < >
  • hor resize <leader> + -
  • also in neotree one can autoexpand width vie e

fold

  • use https://github.com/kevinhwang91/nvim-ufo!!!!!
  • small letter --> non-recursice folding
  • big letter --> recursive folding
  • za/zA to toggle folds
  • zm/zM to fold all functions
  • zr/zR to unfold all functions
  • zc — close the fold (where your cursor is positioned)
  • zM — close all folds on current buffer
  • zo — open the fold (where your cursor is positioned)
  • zR — open all folds on current buffer
  • zj — cursor is moved to next fold
  • zk — cursor is moved to previous fold
  • zi - toggle fold, but save fold state

Install new language

  • install language server via homebrew. e.g brew install lua-language-server or bew install go
  • LSPInstall to install the language server
  • TSInstall to install the treesitter parser (syntax higlighting)

Slack

  • cmd + k --> command line
  • up/down arrow keys --> go up
  • left/right to --> into tread
  • cmd + control + left/right --> go between section
  • cmd + . --> close right panel
  • cmd + shift + d --> open/close nav panel
  • cmd + n --> new message
  • message
    • up | cmd + up --> edit last messsage
    • e --> edit
    • r -- emoji reaction
    • u --> mark unread
    • m --> remind me
  • huddle
    • cmd + shift + h to enter huddle
    • cmd + shift + space --> mute
    • V --> video ?? or just for calls
  • quick jump
    • cmd + shift + t --> treds
    • cmd + shift + a --> unread
    • cmd + shift + w --> reopen last closed window
    • option + up/down to go up/down channels
    • cmd + u --> add file