Esp32 ENERGY_MAX_PHASES and Pzem-004t V3

[bob-tm]

PROBLEM DESCRIPTION

I connect one Pzem-004t-v3 to ESP32. R8 where lowered.

At boot Web UI show 8 phases and then drops to 3 phases (???). Correct values where only for L1 and each second L1 resets to all zeros. Then correct values for 1 second and again zeros. L2 and L3 where always zeros or null.

Then I change ENERGY_MAX_PHASES from 8 to 3 in xdrv_03_esp32_energy.ino and recompile firmware.
Now only L1 left and everything works as expected.

There is some problems with ESP32 and pzem v3

REQUESTED INFORMATION

Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!

• Read the Contributing Guide and Policy and the Code of Conduct
• Searched the problem in issues
• Searched the problem in discussions
• Searched the problem in the docs
• Searched the problem in the chat
• Device used (e.g., Sonoff Basic): Robotdyn Esp32
• Tasmota binary firmware version number used: 12.4.0
  • Pre-compiled
  • Self-compiled
• Flashing tools used: _____
• Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
18:58:44.807 MQT: stat/tasmota_9B0F50/RESULT = {"NAME":"ESP32-DevKit","GPIO":[1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,0,1,1,1,0,0,0,0,1,1,1,1,1,0,0,1],"FLAG":0,"BASE":1}
18:58:45.049 MQT: stat/tasmota_9B0F50/RESULT = {"Module":{"1":"ESP32-DevKit"}}
18:58:45.261 MQT: stat/tasmota_9B0F50/RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"1472":"PZEM0XX Tx"},"GPIO2":{"576":"LedLink_i"},"GPIO3":{"1536":"PZEM016 Rx"},"GPIO4":{"480":"Buzzer"},"GPIO5":{"0":"None"},"GPIO6":{"0":"None"},"GPIO7":{"0":"None"},"GPIO8":{"0":"None"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO11":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"0":"None"},"GPIO14":{"0":"None"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"},"GPIO17":{"0":"None"},"GPIO18":{"0":"None"},"GPIO19":{"0":"None"},"GPIO20":{"0":"None"},"GPIO21":{"640":"I2C SDA1"},"GPIO22":{"608":"I2C SCL1"},"GPIO23":{"0":"None"},"GPIO24":{"0":"None"},"GPIO25":{"224":"Relay1"},"GPIO26":{"225":"Relay2"},"GPIO27":{"1152":"RFrecv"},"GPIO32":{"227":"Relay4"},"GPIO33":{"226":"Relay3"},"GPIO34":{"32":"Button1"},"GPIO35":{"33":"Button2"},"GPIO36":{"34":"Button3"},"GPIO37":{"0":"None"},"GPIO38":{"0":"None"},"GPIO39":{"35":"Button4"}}

• If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• Provide the output of this command: Status 0:

  STATUS 0 output here:

18:59:32.254 CMD: Status 0
18:59:32.263 MQT: stat/tasmota_9B0F50/STATUS = {"Status":{"Module":1,"DeviceName":"Tasmota","FriendlyName":["Tasmota","Tasmota2","Tasmota3","Tasmota4"],"Topic":"tasmota_9B0F50","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0,"StatusRetain":0}}
18:59:32.281 MQT: stat/tasmota_9B0F50/STATUS1 = {"StatusPRM":{"Baudrate":9600,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://ota.tasmota.com/tasmota32/release/tasmota32.bin","RestartReason":"Software reset CPU","Uptime":"0T00:10:49","StartupUTC":"2023-03-03T17:48:43","Sleep":50,"CfgHolder":4617,"BootCount":132,"BCResetTime":"2022-04-12T14:27:52","SaveCount":969}}
18:59:32.294 MQT: stat/tasmota_9B0F50/STATUS2 = {"StatusFWR":{"Version":"12.4.0(tasmota)","BuildDateTime":"2023-03-03T17:46:51","Core":"2_0_6","SDK":"4.4.3.20230129","CpuFrequency":160,"Hardware":"ESP32-D0WD rev.1","CR":"449/699"}}
18:59:32.308 MQT: stat/tasmota_9B0F50/STATUS3 = {"StatusLOG":{"SerialLog":0,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["/dev/null",""],"TelePeriod":60,"Resolution":"558180C0","SetOption":["0000A009","2805C80001000600003C5A0A192800000000","00000080","00006000","00004000","00000000"]}}
18:59:32.331 MQT: stat/tasmota_9B0F50/STATUS4 = {"StatusMEM":{"ProgramSize":1492,"Free":1856,"Heap":149,"StackLowMark":2,"PsrMax":4093,"PsrFree":4093,"ProgramFlashSize":4096,"FlashSize":16384,"FlashChipId":"184020","FlashFrequency":40,"FlashMode":"DOUT","Features":["00000809","9F9AD7CF","0015E001","B7F7BFCF","05DA9BC1","E0360FC7","480840D2","20200000","D43C482D","000080B1"],"Drivers":"1,2,3,4,5,7,8,9,10,11,12,14,15,16,17,20,21,24,26,27,28,29,34,35,38,50,52,59,60,62,63,66,82,86,87,88","Sensors":"1,2,3,5,6,7,8,9,10,11,12,13,14,15,17,18,19,20,21,22,26,29,31,34,37,39,40,42,43,45,51,52,55,56,58,59,64,66,67,74,85,92,95,98,103,127"}}
18:59:32.355 MQT: stat/tasmota_9B0F50/STATUS5 = {"StatusNET":{"Hostname":"Controller-BlackHole","IPAddress":"192.168.100.236","Gateway":"192.168.100.1","Subnetmask":"255.255.255.0","DNSServer1":"192.168.100.1","DNSServer2":"0.0.0.0","Mac":"34:AB:95:9B:0F:50","IP6Global":"","IP6Local":"fe80::36ab:95ff:fe9b:f50","Ethernet":{"Hostname":"","IPAddress":"0.0.0.0","Gateway":"0.0.0.0","Subnetmask":"0.0.0.0","DNSServer1":"192.168.100.1","DNSServer2":"0.0.0.0","Mac":"00:00:00:00:00:00","IP6Global":"","IP6Local":""},"Webserver":2,"HTTP_API":1,"WifiConfig":4,"WifiPower":17.0}}
18:59:32.375 MQT: stat/tasmota_9B0F50/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.100.5","MqttPort":1883,"MqttClientMask":"DVES_%06X","MqttClient":"DVES_9B0F50","MqttUser":"mqtt","MqttCount":1,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
18:59:32.393 MQT: stat/tasmota_9B0F50/STATUS7 = {"StatusTIM":{"UTC":"2023-03-03T17:59:32","Local":"2023-03-03T18:59:32","StartDST":"2023-03-26T02:00:00","EndDST":"2023-10-29T03:00:00","Timezone":"+01:00","Sunrise":"07:28","Sunset":"18:35"}}
18:59:32.413 MQT: stat/tasmota_9B0F50/STATUS9 = {"StatusPTH":{"PowerDelta":[0,0,0],"PowerLow":0,"PowerHigh":0,"VoltageLow":0,"VoltageHigh":0,"CurrentLow":0,"CurrentHigh":0}}
18:59:32.438 MQT: stat/tasmota_9B0F50/STATUS10 = {"StatusSNS":{"Time":"2023-03-03T18:59:32","ENERGY":{"TotalStartTime":"2022-04-12T14:27:52","Total":0.000,"Yesterday":0.000,"Today":0.000,"Power":0,"ApparentPower":0,"ReactivePower":0,"Factor":0.00,"Frequency":50,"Voltage":224,"Current":0.000},"INA219":{"Id":40,"Voltage":1,"Current":0.000,"Power":0},"PCF8574-1":{"D0":1,"D1":1,"D2":1,"D3":1,"D4":1,"D5":1,"D6":1,"D7":1}}}
18:59:32.462 MQT: stat/tasmota_9B0F50/STATUS11 = {"StatusSTS":{"Time":"2023-03-03T18:59:32","Uptime":"0T00:10:49","UptimeSec":649,"Heap":150,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":39,"MqttCount":1,"Berry":{"HeapUsed":3,"Objects":44},"POWER1":"OFF","POWER2":"OFF","POWER3":"OFF","POWER4":"OFF","Wifi":{"AP":1,"SSId":"/dev/null","BSSId":"52:FF:20:8E:B3:96","Channel":1,"Mode":"11n","RSSI":50,"Signal":-75,"LinkCount":1,"Downtime":"0T00:00:04"}}}

• Set weblog to 4 and then, when you experience your issue, provide the output of the Console log:

  Console output here:

TO REPRODUCE

Steps to reproduce the behavior:

EXPECTED BEHAVIOUR

A clear and concise description of what you expected to happen.

SCREENSHOTS

If applicable, add screenshots to help explain your problem.

ADDITIONAL CONTEXT

Add any other context about the problem here.

(Please, remember to close the issue when the problem has been addressed)

[arendst]

Try to change PZEM_STABILIZE in file xnrg_03_pzem004t.ino from 30 to 80.

[bob-tm]

Build latest 12.4.0.2. Everything is fine. Tnx!