Command-line tool to communicate with a Bleskomat hardware device via JSON-RPC over serial API.
Clone this repository:
npm install -g @bleskomat/cliConnect the Bleskomat hardware device to your computer via USB. Then to connect to it:
bleskomat connectOptions:
--devicePath <value> File path of USB device (default: "/dev/ttyUSB0")
--baudRate <value> The baud rate used for serial communication with USB device (default: 115200)
The current user must have permission to read/write to the file. So it may be necessary to change ownership of the device:
sudo chown $USER /dev/ttyUSB0Once connected to the device, send JSON-RPC commands as follows:
> getinfo
Press Tab key twice to auto-complete or print available JSON-RPC methods.
To disconnect press Ctrl + C twice.
Echo command:
> echo ["Ahoj!"]
Reboot the device:
> restart
Get current device configurations:
> getconfig
Set configurations:
> setconfig {"locale":"en"}
Note that all values should be strings.
Get logs:
> getlogs
This may take up to 10 or more seconds depending how much data needs to be transmitted. The logs will be written to a file named "bleskomat.log" in your current working directory.
See CHANGELOG.md
Need some help? Join us in the official Telegram group or send us an email at support@bleskomat.com and we will try our best to respond in a reasonable time. If you have a feature request or bug to report, please open an issue in this project repository.
The project is licensed under the GNU General Public License v3 (GPL-3):
You may copy, distribute and modify the software as long as you track changes/dates in source files. Any modifications to or software including (via compiler) GPL-licensed code must also be made available under the GPL along with build & install instructions.
"Bleskomat" is a registered trademark. You are welcome to hack, fork, build, and use the source code and instructions found in this repository. However, the right to use the name "Bleskomat" with any commercial products or services is withheld and reserved for the trademark owner.