An esp32 library for using TLC5791 microchip for ESP32.
A library to control TLC5971 with an ESP32 module. Requires 2 pins to be connected from the ESP32 to the TLC5971. This library uses one of the pins as a clock signal and the other as a data line.
Check examples folder, for examples on how to use the library
The basic idea is that you have 4 LEDs connected to X amount of controllers, that are all wired in series.
The minimum to get 8 LEDs connected to 2 Controllers to work is:
#include "esp_tlc5971.h"
//Setup 2 LED controllers
Controller chain[2] = {Controller(), Controller()};
If you have more or less controllers, set the correct amount here.
Currently you need to send each controllers data individually with send_data(). So you would iterate over the controllers you have setup and then use their pointers as input for the send_data() function.
- Auto send all data to chain
- Allow optional setting of global data
Shield:
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
