Merge branch '6.5/scsi-fixes' into 6.6/scsi-staging

Pull in the fixes tree for a commit that missed 6.5. Also resolve a
trivial merge conflict in fnic.

* 6.5/scsi-fixes: (36 commits)
  scsi: storvsc: Handle additional SRB status values
  scsi: snic: Fix double free in snic_tgt_create()
  scsi: core: raid_class: Remove raid_component_add()
  scsi: ufs: ufs-qcom: Clear qunipro_g4_sel for HW major version > 5
  scsi: ufs: mcq: Fix the search/wrap around logic
  scsi: qedf: Fix firmware halt over suspend and resume
  scsi: qedi: Fix firmware halt over suspend and resume
  scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
  scsi: lpfc: Remove reftag check in DIF paths
  scsi: ufs: renesas: Fix private allocation
  scsi: snic: Fix possible memory leak if device_add() fails
  scsi: core: Fix possible memory leak if device_add() fails
  scsi: core: Fix legacy /proc parsing buffer overflow
  scsi: 53c700: Check that command slot is not NULL
  scsi: fnic: Replace return codes in fnic_clean_pending_aborts()
  scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
  scsi: pm80xx: Fix error return code in pm8001_pci_probe()
  scsi: zfcp: Defer fc_rport blocking until after ADISC response
  scsi: storvsc: Limit max_sectors for virtual Fibre Channel devices
  scsi: sg: Fix checking return value of blk_get_queue()
  ...

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Author: martinkpetersen

Documentation/ABI/testing/sysfs-driver-ufs

@@ -442,7 +442,6 @@ struct blk_revalidate_zone_args {
 	unsigned long	*conv_zones_bitmap;
 	unsigned long	*seq_zones_wlock;
 	unsigned int	nr_zones;
-	sector_t	zone_sectors;
 	sector_t	sector;
 };
 
@@ -456,38 +455,34 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
 	struct gendisk *disk = args->disk;
 	struct request_queue *q = disk->queue;
 	sector_t capacity = get_capacity(disk);
+	sector_t zone_sectors = q->limits.chunk_sectors;
+
+	/* Check for bad zones and holes in the zone report */
+	if (zone->start != args->sector) {
+		pr_warn("%s: Zone gap at sectors %llu..%llu\n",
+			disk->disk_name, args->sector, zone->start);
+		return -ENODEV;
+	}
+
+	if (zone->start >= capacity || !zone->len) {
+		pr_warn("%s: Invalid zone start %llu, length %llu\n",
+			disk->disk_name, zone->start, zone->len);
+		return -ENODEV;
+	}
 
 	/*
 	 * All zones must have the same size, with the exception on an eventual
 	 * smaller last zone.
 	 */
-	if (zone->start == 0) {
-		if (zone->len == 0 || !is_power_of_2(zone->len)) {
-			pr_warn("%s: Invalid zoned device with non power of two zone size (%llu)\n",
-				disk->disk_name, zone->len);
-			return -ENODEV;
-		}
-
-		args->zone_sectors = zone->len;
-		args->nr_zones = (capacity + zone->len - 1) >> ilog2(zone->len);
-	} else if (zone->start + args->zone_sectors < capacity) {
-		if (zone->len != args->zone_sectors) {
+	if (zone->start + zone->len < capacity) {
+		if (zone->len != zone_sectors) {
 			pr_warn("%s: Invalid zoned device with non constant zone size\n",
 				disk->disk_name);
 			return -ENODEV;
 		}
-	} else {
-		if (zone->len > args->zone_sectors) {
-			pr_warn("%s: Invalid zoned device with larger last zone size\n",
-				disk->disk_name);
-			return -ENODEV;
-		}
-	}
-
-	/* Check for holes in the zone report */
-	if (zone->start != args->sector) {
-		pr_warn("%s: Zone gap at sectors %llu..%llu\n",
-			disk->disk_name, args->sector, zone->start);
+	} else if (zone->len > zone_sectors) {
+		pr_warn("%s: Invalid zoned device with larger last zone size\n",
+			disk->disk_name);
 		return -ENODEV;
 	}
 
@@ -526,11 +521,13 @@ static int blk_revalidate_zone_cb(struct blk_zone *zone, unsigned int idx,
  * @disk:	Target disk
  * @update_driver_data:	Callback to update driver data on the frozen disk
  *
- * Helper function for low-level device drivers to (re) allocate and initialize
- * a disk request queue zone bitmaps. This functions should normally be called
- * within the disk ->revalidate method for blk-mq based drivers.  For BIO based
- * drivers only q->nr_zones needs to be updated so that the sysfs exposed value
- * is correct.
+ * Helper function for low-level device drivers to check and (re) allocate and
+ * initialize a disk request queue zone bitmaps. This functions should normally
+ * be called within the disk ->revalidate method for blk-mq based drivers.
+ * Before calling this function, the device driver must already have set the
+ * device zone size (chunk_sector limit) and the max zone append limit.
+ * For BIO based drivers, this function cannot be used. BIO based device drivers
+ * only need to set disk->nr_zones so that the sysfs exposed value is correct.
  * If the @update_driver_data callback function is not NULL, the callback is
  * executed with the device request queue frozen after all zones have been
  * checked.
@@ -539,9 +536,9 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 			      void (*update_driver_data)(struct gendisk *disk))
 {
 	struct request_queue *q = disk->queue;
-	struct blk_revalidate_zone_args args = {
-		.disk		= disk,
-	};
+	sector_t zone_sectors = q->limits.chunk_sectors;
+	sector_t capacity = get_capacity(disk);
+	struct blk_revalidate_zone_args args = { };
 	unsigned int noio_flag;
 	int ret;
 
@@ -550,13 +547,31 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	if (WARN_ON_ONCE(!queue_is_mq(q)))
 		return -EIO;
 
-	if (!get_capacity(disk))
-		return -EIO;
+	if (!capacity)
+		return -ENODEV;
+
+	/*
+	 * Checks that the device driver indicated a valid zone size and that
+	 * the max zone append limit is set.
+	 */
+	if (!zone_sectors || !is_power_of_2(zone_sectors)) {
+		pr_warn("%s: Invalid non power of two zone size (%llu)\n",
+			disk->disk_name, zone_sectors);
+		return -ENODEV;
+	}
+
+	if (!q->limits.max_zone_append_sectors) {
+		pr_warn("%s: Invalid 0 maximum zone append limit\n",
+			disk->disk_name);
+		return -ENODEV;
+	}
 
 	/*
 	 * Ensure that all memory allocations in this context are done as if
 	 * GFP_NOIO was specified.
 	 */
+	args.disk = disk;
+	args.nr_zones = (capacity + zone_sectors - 1) >> ilog2(zone_sectors);
 	noio_flag = memalloc_noio_save();
 	ret = disk->fops->report_zones(disk, 0, UINT_MAX,
 				       blk_revalidate_zone_cb, &args);
@@ -570,7 +585,7 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 * If zones where reported, make sure that the entire disk capacity
 	 * has been checked.
 	 */
-	if (ret > 0 && args.sector != get_capacity(disk)) {
+	if (ret > 0 && args.sector != capacity) {
 		pr_warn("%s: Missing zones from sector %llu\n",
 			disk->disk_name, args.sector);
 		ret = -ENODEV;
@@ -583,7 +598,6 @@ int blk_revalidate_disk_zones(struct gendisk *disk,
 	 */
 	blk_mq_freeze_queue(q);
 	if (ret > 0) {
-		blk_queue_chunk_sectors(q, args.zone_sectors);
 		disk->nr_zones = args.nr_zones;
 		swap(disk->seq_zones_wlock, args.seq_zones_wlock);
 		swap(disk->conv_zones_bitmap, args.conv_zones_bitmap);

block/blk-zoned.c

@@ -162,21 +162,15 @@ int null_register_zoned_dev(struct nullb *nullb)
 	disk_set_zoned(nullb->disk, BLK_ZONED_HM);
 	blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
 	blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
-
-	if (queue_is_mq(q)) {
-		int ret = blk_revalidate_disk_zones(nullb->disk, NULL);
-
-		if (ret)
-			return ret;
-	} else {
-		blk_queue_chunk_sectors(q, dev->zone_size_sects);
-		nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
-	}
-
+	blk_queue_chunk_sectors(q, dev->zone_size_sects);
+	nullb->disk->nr_zones = bdev_nr_zones(nullb->disk->part0);
 	blk_queue_max_zone_append_sectors(q, dev->zone_size_sects);
 	disk_set_max_open_zones(nullb->disk, dev->zone_max_open);
 	disk_set_max_active_zones(nullb->disk, dev->zone_max_active);
 
+	if (queue_is_mq(q))
+		return blk_revalidate_disk_zones(nullb->disk, NULL);
+
 	return 0;
 }
 

drivers/block/null_blk/zoned.c

@@ -751,7 +751,6 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
 {
 	u32 v, wg;
 	u8 model;
-	int ret;
 
 	virtio_cread(vdev, struct virtio_blk_config,
 		     zoned.model, &model);
@@ -806,6 +805,7 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
 			vblk->zone_sectors);
 		return -ENODEV;
 	}
+	blk_queue_chunk_sectors(q, vblk->zone_sectors);
 	dev_dbg(&vdev->dev, "zone sectors = %u\n", vblk->zone_sectors);
 
 	if (virtio_has_feature(vdev, VIRTIO_BLK_F_DISCARD)) {
@@ -814,26 +814,22 @@ static int virtblk_probe_zoned_device(struct virtio_device *vdev,
 		blk_queue_max_discard_sectors(q, 0);
 	}
 
-	ret = blk_revalidate_disk_zones(vblk->disk, NULL);
-	if (!ret) {
-		virtio_cread(vdev, struct virtio_blk_config,
-			     zoned.max_append_sectors, &v);
-		if (!v) {
-			dev_warn(&vdev->dev, "zero max_append_sectors reported\n");
-			return -ENODEV;
-		}
-		if ((v << SECTOR_SHIFT) < wg) {
-			dev_err(&vdev->dev,
-				"write granularity %u exceeds max_append_sectors %u limit\n",
-				wg, v);
-			return -ENODEV;
-		}
-
-		blk_queue_max_zone_append_sectors(q, v);
-		dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
+	virtio_cread(vdev, struct virtio_blk_config,
+		     zoned.max_append_sectors, &v);
+	if (!v) {
+		dev_warn(&vdev->dev, "zero max_append_sectors reported\n");
+		return -ENODEV;
+	}
+	if ((v << SECTOR_SHIFT) < wg) {
+		dev_err(&vdev->dev,
+			"write granularity %u exceeds max_append_sectors %u limit\n",
+			wg, v);
+		return -ENODEV;
 	}
+	blk_queue_max_zone_append_sectors(q, v);
+	dev_dbg(&vdev->dev, "max append sectors = %u\n", v);
 
-	return ret;
+	return blk_revalidate_disk_zones(vblk->disk, NULL);
 }
 
 #else

drivers/block/virtio_blk.c

@@ -10,12 +10,11 @@
 int nvme_revalidate_zones(struct nvme_ns *ns)
 {
 	struct request_queue *q = ns->queue;
-	int ret;
 
-	ret = blk_revalidate_disk_zones(ns->disk, NULL);
-	if (!ret)
-		blk_queue_max_zone_append_sectors(q, ns->ctrl->max_zone_append);
-	return ret;
+	blk_queue_chunk_sectors(q, ns->zsze);
+	blk_queue_max_zone_append_sectors(q, ns->ctrl->max_zone_append);
+
+	return blk_revalidate_disk_zones(ns->disk, NULL);
 }
 
 static int nvme_set_max_append(struct nvme_ctrl *ctrl)

drivers/nvme/host/zns.c

@@ -534,8 +534,7 @@ static void zfcp_fc_adisc_handler(void *data)
 
 	/* re-init to undo drop from zfcp_fc_adisc() */
 	port->d_id = ntoh24(adisc_resp->adisc_port_id);
-	/* port is good, unblock rport without going through erp */
-	zfcp_scsi_schedule_rport_register(port);
+	/* port is still good, nothing to do */
  out:
 	atomic_andnot(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
 	put_device(&port->dev);
@@ -595,9 +594,6 @@ void zfcp_fc_link_test_work(struct work_struct *work)
 	int retval;
 
 	set_worker_desc("zadisc%16llx", port->wwpn); /* < WORKER_DESC_LEN=24 */
-	get_device(&port->dev);
-	port->rport_task = RPORT_DEL;
-	zfcp_scsi_rport_work(&port->rport_work);
 
 	/* only issue one test command at one time per port */
 	if (atomic_read(&port->status) & ZFCP_STATUS_PORT_LINK_TEST)

drivers/s390/scsi/zfcp_fc.c

@@ -1598,7 +1598,7 @@ NCR_700_intr(int irq, void *dev_id)
 				printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
 #endif
 				resume_offset = hostdata->pScript + Ent_SendMessagePhaseMismatch;
-			} else if(dsp >= to32bit(&slot->pSG[0].ins) &&
+			} else if (slot && dsp >= to32bit(&slot->pSG[0].ins) &&
 				  dsp <= to32bit(&slot->pSG[NCR_700_SG_SEGMENTS].ins)) {
 				int data_transfer = NCR_700_readl(host, DBC_REG) & 0xffffff;
 				int SGcount = (dsp - to32bit(&slot->pSG[0].ins))/sizeof(struct NCR_700_SG_List);

drivers/scsi/53c700.c

@@ -2618,7 +2618,7 @@ struct aac_hba_info {
 struct aac_aifcmd {
 	__le32 command;		/* Tell host what type of notify this is */
 	__le32 seqnum;		/* To allow ordering of reports (if necessary) */
-	u8 data[1];		/* Undefined length (from kernel viewpoint) */
+	u8 data[];		/* Undefined length (from kernel viewpoint) */
 };
 
 /**

drivers/scsi/aacraid/aacraid.h

@@ -2139,7 +2139,7 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 				     bool new_sc)
 
 {
-	int ret = SUCCESS;
+	int ret = 0;
 	struct fnic_pending_aborts_iter_data iter_data = {
 		.fnic = fnic,
 		.lun_dev = lr_sc->device,
@@ -2159,9 +2159,11 @@ static int fnic_clean_pending_aborts(struct fnic *fnic,
 
 	/* walk again to check, if IOs are still pending in fw */
 	if (fnic_is_abts_pending(fnic, lr_sc))
-		ret = FAILED;
+		ret = 1;
 
 clean_pending_aborts_end:
+	FNIC_SCSI_DBG(KERN_INFO, fnic->lport->host,
+			"%s: exit status: %d\n", __func__, ret);
 	return ret;
 }
 

drivers/scsi/fnic/fnic_scsi.c

@@ -465,7 +465,7 @@ int fnic_trace_buf_init(void)
 	fnic_max_trace_entries = (trace_max_pages * PAGE_SIZE)/
 					  FNIC_ENTRY_SIZE_BYTES;
 
-	fnic_trace_buf_p = (unsigned long)vzalloc(trace_max_pages * PAGE_SIZE);
+	fnic_trace_buf_p = (unsigned long)vcalloc(trace_max_pages, PAGE_SIZE);
 	if (!fnic_trace_buf_p) {
 		printk(KERN_ERR PFX "Failed to allocate memory "
 				  "for fnic_trace_buf_p\n");