Update dependency coverage to v5 - autoclosed

[renovate]

This PR contains the following updates:

Package	Change	Age	Adoption	Passing	Confidence
coverage	==4.4.2 -> ==5.5

---

Release Notes

nedbat/coveragepy

v5.5

Compare Source

• coverage combine has a new option, --keep to keep the original data
  files after combining them. The default is still to delete the files after
  they have been combined. This was requested in issue 1108_ and implemented
  in pull request 1110_. Thanks, Éric Larivière.

• When reporting missing branches in coverage report, branches aren't
  reported that jump to missing lines. This adds to the long-standing behavior
  of not reporting branches from missing lines. Now branches are only reported
  if both the source and destination lines are executed. Closes both issue 1065_ and issue 955_.

• Minor improvements to the HTML report:

  • The state of the line visibility selector buttons is saved in local storage
    so you don't have to fiddle with them so often, fixing issue 1123_.

  • It has a little more room for line numbers so that 4-digit numbers work
    well, fixing issue 1124_.

• Improved the error message when combining line and branch data, so that users
  will be more likely to understand what's happening, closing issue 803_.

.. _issue 803:https://github.com/nedbat/coveragepy/issues/8033
.. _issue 955https://github.com/nedbat/coveragepy/issues/95555
.. _issue 106https://github.com/nedbat/coveragepy/issues/1065065
.. _issue 11https://github.com/nedbat/coveragepy/issues/11081108
.. _pull request 1https://github.com/nedbat/coveragepy/pull/1110/1110
.. _issue https://github.com/nedbat/coveragepy/issues/1123s/1123
.. _issuehttps://github.com/nedbat/coveragepy/issues/1124es/1124

.. _changes_54:

v5.4

Compare Source

• The text report produced by coverage report now always outputs a TOTAL
  line, even if only one Python file is reported. This makes regex parsing
  of the output easier. Thanks, Judson Neer. This had been requested a number
  of times (issue 1086, issue 922, issue 732_).

• The skip_covered and skip_empty settings in the configuration file
  can now be specified in the [html] section, so that text reports and HTML
  reports can use separate settings. The HTML report will still use the
  [report] settings if there isn't a value in the [html] section.
  Closes issue 1090_.

• Combining files on Windows across drives now works properly, fixing issue 577. Thanks, Valentin Lab <pr1080_>.

• Fix an obscure warning from deep in the decimal module, as reported in
  issue 1084.

• Update to support Python 3.10 alphas in progress, including PEP 626: Precise line numbers for debugging and other tools <pep626_>_.

.. _issue 577:https://github.com/nedbat/coveragepy/issues/5777
.. _issue 732https://github.com/nedbat/coveragepy/issues/73232
.. _issue 92https://github.com/nedbat/coveragepy/issues/922922
.. _issue 10https://github.com/nedbat/coveragepy/issues/10841084
.. _issue 1https://github.com/nedbat/coveragepy/issues/1086/1086
.. _issue https://github.com/nedbat/coveragepy/issues/1090s/1090
.. _phttps://github.com/nedbat/coveragepy/pull/1080ll/1080
.. _pep626: https://www.python.org/dev/peps/pep-0626/

.. _changes_531:

v5.3.1

Compare Source

• When using --source on a large source tree, v5.x was slower than previous
  versions. This performance regression is now fixed, closing issue 1037_.

• Mysterious SQLite errors can happen on PyPy, as reported in issue 1010_. An
  immediate retry seems to fix the problem, although it is an unsatisfying
  solution.

• The HTML report now saves the sort order in a more widely supported way,
  fixing issue 986. Thanks, Sebastián Ramírez (pull request 1066).

• The HTML report pages now have a :ref:Sleepy Snake <sleepy> favicon.

• Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37).

• Continuous integration has moved from Travis and AppVeyor to GitHub Actions.

.. _issue 986:https://github.com/nedbat/coveragepy/issues/9866
.. _issue 1037https://github.com/nedbat/coveragepy/issues/103737
.. _issue 101https://github.com/nedbat/coveragepy/issues/1010010
.. _pull request 10https://github.com/nedbat/coveragepy/pull/10661066

.. _changes_53:

v5.3

Compare Source

• When using --source on a large source tree, v5.x was slower than previous
  versions. This performance regression is now fixed, closing issue 1037_.

• Mysterious SQLite errors can happen on PyPy, as reported in issue 1010_. An
  immediate retry seems to fix the problem, although it is an unsatisfying
  solution.

• The HTML report now saves the sort order in a more widely supported way,
  fixing issue 986. Thanks, Sebastián Ramírez (pull request 1066).

• The HTML report pages now have a :ref:Sleepy Snake <sleepy> favicon.

• Wheels are now provided for manylinux2010, and for PyPy3 (pp36 and pp37).

• Continuous integration has moved from Travis and AppVeyor to GitHub Actions.

.. _issue 986:https://github.com/nedbat/coveragepy/issues/9866
.. _issue 1037https://github.com/nedbat/coveragepy/issues/103737
.. _issue 101https://github.com/nedbat/coveragepy/issues/1010010
.. _pull request 10https://github.com/nedbat/coveragepy/pull/10661066

.. _changes_53:

v5.2.1

Compare Source

• The dark mode HTML report still used light colors for the context listing,
  making them unreadable (issue 1009_). This is now fixed.

• The time stamp on the HTML report now includes the time zone. Thanks, Xie
  Yanbo (pull request 960_).

.. _pull request 960:https://github.com/nedbat/coveragepy/pull/9600
.. _issue 1009https://github.com/nedbat/coveragepy/issues/100909

.. _changes_52:

v5.2

Compare Source

• The dark mode HTML report still used light colors for the context listing,
  making them unreadable (issue 1009_). This is now fixed.

• The time stamp on the HTML report now includes the time zone. Thanks, Xie
  Yanbo (pull request 960_).

.. _pull request 960:https://github.com/nedbat/coveragepy/pull/9600
.. _issue 1009https://github.com/nedbat/coveragepy/issues/100909

.. _changes_52:

v5.1

Compare Source

• The JSON report now includes counts of covered and missing branches. Thanks,
  Salvatore Zagaria.

• On Python 3.8, try-finally-return reported wrong branch coverage with
  decorated async functions (issue 964_). This is now fixed. Thanks, Kjell
  Braden.

• The :meth:~coverage.Coverage.get_option and
  :meth:~coverage.Coverage.set_option methods can now manipulate the
  [paths] configuration setting. Thanks to Bernát Gábor for the fix for
  issue 967_.

.. _issue 964:https://github.com/nedbat/coveragepy/issues/9644
.. _issue 967https://github.com/nedbat/coveragepy/issues/96767

.. _changes_504:

v5.0.4

Compare Source

• If using the [run] relative_files setting, the XML report will use
  relative files in the <source> elements indicating the location of source
  code. Closes issue 948_.

• The textual summary report could report missing lines with negative line
  numbers on PyPy3 7.1 (issue 943_). This is now fixed.

• Windows wheels for Python 3.8 were incorrectly built, but are now fixed.
  (issue 949_)

• Updated Python 3.9 support to 3.9a4.

• HTML reports couldn't be sorted if localStorage wasn't available. This is now
  fixed: sorting works even though the sorting setting isn't retained. (issue 944_ and pull request 945_). Thanks, Abdeali Kothari.

.. _issue 943:https://github.com/nedbat/coveragepy/issues/9433
.. _issue 944https://github.com/nedbat/coveragepy/issues/94444
.. _pull request 94https://github.com/nedbat/coveragepy/pull/945945
.. _issue 9https://github.com/nedbat/coveragepy/issues/948/948
.. _issue https://github.com/nedbat/coveragepy/issues/949s/949

.. _changes_503:

v5.0.3

Compare Source

• A performance improvement in 5.0.2 didn't work for test suites that changed
  directory before combining data, causing "Couldn't use data file: no such
  table: meta" errors (issue 916_). This is now fixed.

• Coverage could fail to run your program with some form of "ModuleNotFound" or
  "ImportError" trying to import from the current directory. This would happen
  if coverage had been packaged into a zip file (for example, on Windows), or
  was found indirectly (for example, by pyenv-virtualenv). A number of
  different scenarios were described in issue 862_ which is now fixed. Huge
  thanks to Agbonze O. Jeremiah for reporting it, and Alexander Waters and
  George-Cristian Bîrzan for protracted debugging sessions.

• Added the "premain" debug option.

• Added SQLite compile-time options to the "debug sys" output.

.. _issue 862:https://github.com/nedbat/coveragepy/issues/8622
.. _issue 916https://github.com/nedbat/coveragepy/issues/91616

.. _changes_502:

v5.0.2

Compare Source

• Programs that used multiprocessing and changed directories would fail under
  coverage. This is now fixed (issue 890_). A side effect is that debug
  information about the config files read now shows absolute paths to the
  files.

• When running programs as modules (coverage run -m) with --source,
  some measured modules were imported before coverage starts. This resulted in
  unwanted warnings ("Already imported a file that will be measured") and a
  reduction in coverage totals (issue 909_). This is now fixed.

• If no data was collected, an exception about "No data to report" could happen
  instead of a 0% report being created (issue 884_). This is now fixed.

• The handling of source files with non-encodable file names has changed.
  Previously, if a file name could not be encoded as UTF-8, an error occurred,
  as described in issue 891_. Now, those files will not be measured, since
  their data would not be recordable.

• A new warning ("dynamic-conflict") is issued if two mechanisms are trying to
  change the dynamic context. Closes issue 901_.

• coverage run --debug=sys would fail with an AttributeError. This is now
  fixed (issue 907_).

.. _issue 884:https://github.com/nedbat/coveragepy/issues/8844
.. _issue 890https://github.com/nedbat/coveragepy/issues/89090
.. _issue 89https://github.com/nedbat/coveragepy/issues/891891
.. _issue 9https://github.com/nedbat/coveragepy/issues/901/901
.. _issue https://github.com/nedbat/coveragepy/issues/907s/907
.. _issuehttps://github.com/nedbat/coveragepy/issues/909es/909

.. _changes_501:

v5.0.1

Compare Source

• If a 4.x data file is the cause of a "file is not a database" error, then use
  a more specific error message, "Looks like a coverage 4.x data file, are you
  mixing versions of coverage?" Helps diagnose the problems described in
  issue 886_.

• Measurement contexts and relative file names didn't work together, as
  reported in issue 899_ and issue 900_. This is now fixed, thanks to
  David Szotten.

• When using coverage run --concurrency=multiprocessing, all data files
  should be named with parallel-ready suffixes. 5.0 mistakenly named the main
  process' file with no suffix when using --append. This is now fixed,
  closing issue 880_.

• Fixed a problem on Windows when the current directory is changed to a
  different drive (issue 895_). Thanks, Olivier Grisel.

• Updated Python 3.9 support to 3.9a2.

.. _issue 880:https://github.com/nedbat/coveragepy/issues/8800
.. _issue 886https://github.com/nedbat/coveragepy/issues/88686
.. _issue 89https://github.com/nedbat/coveragepy/issues/895895
.. _issue 8https://github.com/nedbat/coveragepy/issues/899/899
.. _issue https://github.com/nedbat/coveragepy/issues/900s/900

.. _changes_50:

v5.0

Compare Source

• If using the [run] relative_files setting, the XML report will use
  relative files in the <source> elements indicating the location of source
  code. Closes issue 948_.

• The textual summary report could report missing lines with negative line
  numbers on PyPy3 7.1 (issue 943_). This is now fixed.

• Windows wheels for Python 3.8 were incorrectly built, but are now fixed.
  (issue 949_)

• Updated Python 3.9 support to 3.9a4.

• HTML reports couldn't be sorted if localStorage wasn't available. This is now
  fixed: sorting works even though the sorting setting isn't retained. (issue 944_ and pull request 945_). Thanks, Abdeali Kothari.

.. _issue 943:https://github.com/nedbat/coveragepy/issues/9433
.. _issue 944https://github.com/nedbat/coveragepy/issues/94444
.. _pull request 94https://github.com/nedbat/coveragepy/pull/945945
.. _issue 9https://github.com/nedbat/coveragepy/issues/948/948
.. _issue https://github.com/nedbat/coveragepy/issues/949s/949

.. _changes_503:

v4.5.4

Compare Source

• Multiprocessing support in Python 3.8 was broken, but is now fixed. Closes
  issue 828_.

.. _issue 828:https://github.com/nedbat/coveragepy/issues/8288

.. _changes_453:

v4.5.3

Compare Source

• Only packaging metadata changes.

.. _changes_452:

v4.5.2

Compare Source

• Namespace packages are supported on Python 3.7, where they used to cause
  TypeErrors about path being None. Fixes issue 700_.

• Python 3.8 (as of today!) passes all tests. Fixes issue 707_ and
  issue 714_.

• Development moved from Bitbucket_ to GitHub_.

.. _issue 700:https://github.com/nedbat/coveragepy/issues/7000
.. _issue 707https://github.com/nedbat/coveragepy/issues/70707
.. _issue 71https://github.com/nedbat/coveragepy/issues/714714

.. _Bitbucket: https://bitbucket.org
.. _GitHub: https://github.com/nedbat/coveragepy

.. _changes_451:

v4.5.1

Compare Source

• Now that 4.5 properly separated the [run] omit and [report] omit
  settings, an old bug has become apparent. If you specified a package name
  for [run] source, then omit patterns weren't matched inside that package.
  This bug (issue 638_) is now fixed.

• On Python 3.7, reporting about a decorated function with no body other than a
  docstring would crash coverage.py with an IndexError (issue 640_). This is
  now fixed.

• Configurer plugins are now reported in the output of --debug=sys.

.. _issue 638:https://github.com/nedbat/coveragepy/issues/6388
.. _issue 640https://github.com/nedbat/coveragepy/issues/64040

.. _changes_45:

v4.5

Compare Source

• Multiprocessing support in Python 3.8 was broken, but is now fixed. Closes
  issue 828_.

.. _issue 828:https://github.com/nedbat/coveragepy/issues/8288

.. _changes_453:

---

Configuration

📅 Schedule: At any time (no schedule defined).

🚦 Automerge: Disabled by config. Please merge this manually once you are satisfied.

♻ Rebasing: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox.

🔕 Ignore: Close this PR and you won't be reminded about this update again.

---

• If you want to rebase/retry this PR, check this box.

---

This PR has been generated by WhiteSource Renovate. View repository job log here.